Abstract
A systematic study of the influence of laser pulse width in ultrafast laser micromachining of silicon and stainless steel was carried out. Experiments were performed using a Ti:sapphire laser with 800 nm and 400 nm (frequency doubling) wavelengths in an air environment with a pulse duration ranging from 110 fs to 10 ps. Hole drilling and line cutting of silicon and stainless steel were studied. Structural details of the machined area were characterized using a number of techniques such as optical microscopy, atomic force microscopy and stylus profilometry. The effect of pulse width on melting was observed at ∼2.5 ps for stainless steel and at ∼5 ps for silicon. Also, the polarization effect on the laser machining is reported. The machined quality using femtosecond laser pulses with high energy fluence was found to be limited by the laser intensity contrast.
Similar content being viewed by others
References
D. Bauerle: Laser processing and Chemistry, 3rd edn. (Springer-Verlag, Berlin, Heidelberg 2000)
W.M. Steen: Laser Material processing, 2nd edn. (Springer-Verlag, London 1998)
J. Ihlemann, A. Scholl, H. Schmidt, B. Wolff-Rottke: Appl. Phys. A 60, 411 (1995)
P.P. Pronko, S.K. Dutta, J. Squier, J.V. Rudde, D. Du, G. Mourou: Opt. Commun. 114, 106 (1995)
D. Ashkenasi, A. Rosenfeld, H. Varel, M. Wahmer, E.E.B. Campbell: Appl. Surf. Sci. 120, 65 (1997)
M.D. Perry, B.C. Stuart, P.S. Banks, M.D. Feit, V. Yanovsky, A.M. Rubenchik: J. Appl. Phys. 85, 6803 (1999)
S. Nolte, G. Kamlage, F. Korte, T. Bauer, T. Wagner, A. Ostendorf, C. Fallnich, H. Welling: Adv. Eng. Mater. 2, 23 (2000)
N. Barsh, K. Korrber, A. Ostendorh, K.H. Tonshoff: Appl. Phys. A 77, 237 (2003)
R.F.W. Herrmann, J. Gerlach, E.E.B. Campbell: Appl. Phys. A 66, 35 (1998)
V. Hertel, R. Stoian, A. Rosenfeld, D. Ashkenasi, E.E.B. Campbell: Riken Review 32, 23 (2001)
A.A. Bugayev, M.C. Gupta: Opt. Lett. 28, 1463 (2003)
M. El-Bandrawy, K. Nagarathnam, M.C. Gupta, C. Hamann, J. Horsting: J. Laser Appl. 15, 101 (2003)
M. El-Bandrawy, M.C. Gupta: Proc. SPIE 4977, 219 (2003)
X.Y. Wang, D.M. Riffe, Y.S. Lee, M.C. Downer: Phys. Rev. B 50, 8016 (1994)
R.W. Schoenlein, W.Z. Lin, J.G. Fujimoto, G.L. Eesley: Phys. Rev. Lett. 58, 1680 (1987)
W.S. Fann, R. Storz, H.W. K Tom, J. Bokor: Phys. Rev. B 46, 13592 (1992)
W. Kautek, J. Kruger: Proc. SPIE 2207, 600 (1994)
S. Preuss, A. Demchuk, M. Stuke: Appl. Phys. A 61, 33 (1995)
B.N. Chichkov, C. Momma, S. Notle, F. Alvensleben, A. Tünnermann: Appl. Phys. A 63, 109 (1996)
P.S. Banks, D.D. Feit, A.M. Rubenchik, B.C. Stuart, M.D. Perry: Appl. Phys. A 69, S377 (1999)
M.M. Murnanem H.C. Kapteyn, R.M.W. Falcone: Phys. Rev. Lett. 62, 155 (1989)
J. Queneuille, F. Druon, A. Maksimchuk, G. Cheriaux, G. Mourou, K. Nemoto: Opt. Lett. 25, 508 (2000)
J.Y. Zhang, J. Huang, H. Wang, K.S. Wong, G.K. Wong: J. Opt. Soc. Am. B 15, 200 (1998)
Y. Tamaki, M. Obara, K. Midorikawa: Jpn. J. Appl. Phys. 37, 4801 (1998)
G. Albrecht, A. Antnetti, G. Mourou: Opt. Commun. 40, 59 (1981)
S. Nolte, C. Momma, G. Kamlage, A. Ostendorf, C. Fallnich, F. von Alvensleben, H. Welling: Appl. Phys. A 68, 563 (1999)
H.K. Tonshoff, A. Ostendorf, T. Wagner: Proc. SPIE 4274, 88 (2001)
K. Venkatakrishnan, B. Tan, P. Stanley, N.R. Sivakumar: J. Appl. Phys. 92, 1604 (2002)
K. Fargoo, A. Kar: J. Appl. Phys. 83, 7467 (1998)
A. Siegman: Lasers (University Science Books, Mill Valley, CA 1986) pp. 385
E.T.J. Nibbering, G. Grillon, M.A. Franco, F.S. Prade, A. Mysyrowicz: J. Opt. Soc. Am. B 14, 650 (1997)
Author information
Authors and Affiliations
Corresponding author
Additional information
PACS
79.20Ds; 81.15fg
Rights and permissions
About this article
Cite this article
Chien, C., Gupta, M. Pulse width effect in ultrafast laser processing of materials. Appl. Phys. A 81, 1257–1263 (2005). https://doi.org/10.1007/s00339-004-2989-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00339-004-2989-z