Abstract
Picosecond laser single pulse ablation of Au, Al and Ti alloy (Ti6Al4V) was experimentally investigated with a laser pulse width of 10 ps at a wavelength of 1064 nm for potential industrial micromachining applications. The diameters, depths and morphologies of the drilled craters were studied. Two novel phenomena were found: as hole diameters decreased with fluence, a change of slope of the trend line indicated a change in ablation mechanism for Al and Ti alloy, metallic materials with short electron-phonon coupling times (<10 ps), while Au showed no such transition: an isolated island structure was also observed on Au due to significant melt expulsion. A one-dimensional two-temperature model has been used to discriminate different ablation phenomena. It is shown that metallic materials with different electron–phonon coupling constant have different ablation characteristics in the ps regime. This study could be very helpful for metallic material micromachining with high repetition rate ps lasers pulses which indicates that high throughput may be achieved as well as good machining quality.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
J. König, S. Nolte, A. Tünnermann, Opt. Express 13, 10597 (2005)
F. Dausinger, F. Lichter, H. Lubatschowski, Femtosecond Technology for Technical and Medical Applications (Springer, Heidelberg, 2004)
F. Dausinger, Proc. SPIE 5777, 840 (2005)
G. Račiukaitis, M. Brikas, Proc. SPIE 5662, 717 (2004)
A. Ostendorf, G. Kamlage, U. Klug, F. Korte, B.N. Chichkov, Proc. SPIE 5713, 1 (2005)
D. Karnakis, G. Rutterford, M. Knowles, T. Dobrev, P. Petkov, S. Dimov, Proc. SPIE 6106, 610604 (2006)
J. Lleinbauer, R. Knappe, R. Wallenstein, Appl. Phys. B 80, 315 (2005)
R. Le Harzic, D. Breitling, M. Weikert, S. Sommer, C. Föhl, S. Valette, C. Donnet, E. Audouard, F. Dausinger, Appl. Surf. Sci. 249, 322 (2005)
S.D. Broson, A. Kazeroonian, J.S. Moodera, D.W. Face, T.K. Cheng, E.P. Ippen, M.S. Dresselhaus, G. Dresselhaus, Phys. Rev. Lett. 64, 2172 (1990)
W.M. Steen, K. Watkins, Laser Material Processing, 3rd edn. (Springer, London, 2003)
J.M. Liu, Opt. Lett. 7, 196 (1982)
S. Nolte, C. Momma, H. Jacobs, A. Tünnermann, B.N. Chichkov, B. Wellegehausen, H. Welling, J. Opt. Soc. Am. B 14, 2716 (1997)
S. Preuss, A. Demchuk, M. Stuke, Appl. Phys. A 61, 33 (1995)
R. Le Harzic, D. Breitling, M. Weikept, S. Sommer, C. Föhl, F. Sausinger, S. Valette, C. Donnet, E. Audouard, Appl. Phys. A 80, 1589 (2005)
S.I. Anisimov, B. Kapeliovich, T.L. Perel’man, Sov. Phys. JETP 39, 375 (1974)
S.-S. Wellershoff, J. Hohlfeld, J. Güdde, E. Matthias, Appl. Phys. A 69(Suppl.), 99 (1999)
M. Bonn, D.N. Denzler, S. Funk, M. Wolf, S.-S. Wellershoff, J. Hohlfeld, Phys. Rev. B 61, 1101 (2000)
J.F. Ready, LIA Handbook of Laser Material Processing (Magnolia Publishing, 2001)
M.V. Allmen, A. Blatter, Laser-Beam Interactions with Materials (Springer, Heidelberg, 1994)
X.Y. Wang, D.M. Riffe, Y.-S. Lee, M.C. Downer, Phys. Rev. B 50, 8016 (1994)
B.N. Chichkov, C. Momma, S. Nolte, F. von Alvensleben, A. Tünnermann, Appl. Phys. A 63, 109 (1996)
P.T. Mannion, J. Magee, E. Coyne, G.M. O’Connor, T.J. Glynn, Appl. Surf. Sci. 233, 275 (2004)
M. Sparks, E. Loh, J. Opt. Soc. Am. 69, 847 (1976)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cheng, J., Perrie, W., Sharp, M. et al. Single-pulse drilling study on Au, Al and Ti alloy by using a picosecond laser. Appl. Phys. A 95, 739–746 (2009). https://doi.org/10.1007/s00339-008-5037-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00339-008-5037-6