Abstract
SU-8 is a negative, epoxy type, near-UV photoresist. This resist has been specifically developed for ultrathick, high-aspect-ratio MEMS-type applications using standard lithography equipment. However, in practice, SU-8 has shown to be very sensitive to process parameter variation. The orthogonal array was used in our experiments in order to improve the lithography quality and analyze the interaction among the parameters. The analyses show that the interaction between the exposure dose and post exposure bake has played an important role in adhesion between SU-8 resist and the substrate. The proposed process conditions are given. The output structure has straight sidewall profile, fine line and good space resolution. The aspect ratio is larger than 20. Moreover, several metallic films are used as substrates. The Ti film with oxidation treatment was found to have the strongest adhesion to the resist. The result will help to open possibilities for low-cost LIGA-type process for MEMS applications.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, J., Cai, B., Zhu, J. et al. Process research of high aspect ratio microstructure using SU-8 resist. Microsystem Technologies 10, 265–268 (2004). https://doi.org/10.1007/s00542-002-0242-2
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s00542-002-0242-2