Abstract
This paper presents a magnetic field sensor with capacitive read-out, whose active element is a micromachined mechanical resonator. The MEMS magnetic field sensor exploits the Lorentz force to detect external magnetic flux density through the displacement of the resonant structure, which can be measured with optical and capacitive sensing techniques. The micromachined U-shaped cantilever features a length of 2 mm, a base width of 90 μm and a thickness of 20 μm, and is manufactured in SOI technology. The designed sensor has a measured resonant frequency of 4.359 kHz for the fundamental mode and a calculated mass of the flexible structure of 24.5 ng. A quality factor in the order of 104 at an ambient pressure of 0.3 Pa has been measured where a magnetic field resolution of 15 nT can be achieved. Although these arrangements are well suited to capacitively sense the vibrations caused by the Lorentz force on the current lead on the silicon part, care has to be taken to avoid undesired mutual interferences. A serious interference was observed in case of a DC bias voltage at the readout capacitance and a significant voltage drop caused by the current needed for the generation of the Lorentz force. This work investigates in detail this phenomenon as well as the complete physical transduction chain and improves the understanding of such microelectromechanical systems significantly. An analytical model of the electrostatic system is established including all relevant components and their interactions as well as the motion of the MEMS part. The importance of electrostatic back-action for a feasible detection limit for magnetic fields was recognized for the first time.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Ahn Y, Guckel H, Zook JD (2000) Capacitive microbeam resonator design. J Micromech Microeng 11:70–80
Benes E (1984) Improved quartz crystal microbalance technique. J Appl Phys 56:608–626
DeMartini BE, Butterfield HE, Moehlis J, Turner KL (2007) Chaos for a microelectromechanical oscillator governed by the nonlinear Mathieu equation. J Microelectromech Syst 16:1314–1323
Greywall DS (1999) Micromechanical RF filters excited by the Lorentz force. J Micromech Microeng 9:78–84
Harris CM, Piersol AG (eds) (2002) Harri’s shock and vibration handbook. McGraw-Hill, New York
Herrera-May AL, Aguilera-Cortés LA, García-Ramírez PJ, Manjarrez E (2009) Resonant magnetic field sensors based on MEMS technology. Sensors 9:7785–7813
Huang XMH, Feng XL, Zorman CA, Mehregany M, Roukes ML (2005) VHF, UHF and microwave frequency nanomechanical resonators. New J Phys 7(247):1–15
Husain A, Hone J, Postma HWCh, Huang XMH, Drake T, Barbic M, Scherer A, Roukes ML (2003) Nanowire-based very-high-frequency electromechanical resonator. Appl Phys Lett 83(6):1240–1242
IEEE (1987) IEEE standard on piezoelectricity, Std 176–1987, p 51
Ilic B, Craighead HG, Krylov S, Senaratne W, Ober C, Neuzil P (2003) Attogram detection using nanoelectromechanical oscillators. J Appl Phys 95:2694–3703
Kádár Z, Bossche A, Mollinger J (1994) Integrated resonant magnetic-field sensor. Sens Actuators A 41:66–69
Karabalin RB, Feng XL, Roukes ML (2009) Parametric nanomechanical amplification at very high frequency. Nano Lett 9(9):3113–3123
Lifshitz R, Cross MC (2010) Nonlinear dynamics of nanosystems. Wiley-VCH Verlag GmbH, New York
Mestrom RMC, Fey RHB, Phan KL, Nijmeijer H (2010) Simulations and experiments of hardening and softening resonances in a clamped-clamped beam MEMS resonator. Sens Actuators A Phys A162–2:225–234
Nayfeh AH, Mook DT (1979) Nonlinear oscillations. Wiley, New York
Raskin JP, Brown AR, Khuri-Yakub BT, Rebeiz GM (2000) A novel parametric-effect MEMS amplifier. J Microelectromech Syst 9(4):528–537
Rhoads JF, Shaw SW, Turner KL (2010) Nonlinear dynamics and its applications in micro- and nanoresonators. J Dyn Syst 132:1–30
Stemme G (1991) Resonant silicon sensors. J Micromech Microeng 1:113–125
Stifter M, Sachse M, Sauter T, Hortschitz W, Keplinger F (2012) Pressure dependence of the quality factor of a micromachined cantilever in rarefied gases. J Phys Conf Ser 362(1):1–9
Stifter M, Sauter T, Hortschitz W, Steiner H, Keplinger (2012) MEMS heterodyne AMF detection with capacitive sensing. In: Sensors, 2012 IEEE, p 4
Stifter M, Steiner H, Kainz A, Keplinger F, Hortschitz W, Sauter T (2013) A Lorentz force actuated magnetic field sensor with capacitive read-out. In: Proceedings of SPIE, p 6
Sunier R, Vancura T, Yue L, Kirstein K-U, Baltes H, Brand O (2006) Resonant magnetic field sensor with frequency output. J Microelectromech Syst 15:1098–1107
Trusov AA, Shkel AM (eds) (2007) The effect of high order non-linearities on sub-harmonic excitation with parallel plate capacitive actuators. In: Proceedings of the ASME 2007 international design engineering technical conferences and computers and information in engineering conference
Turner KL, Miller SA, Hartwell PG, MacDonald NC, Strogatz SH, Adams SG (1998) Five parametric resonances in a microelectromechanical system. Nature 396:149–152
Zhang W, Baskaran R, Turner KL (12002) Effect of cubic nonlinearity on auto-parametrically amplified resonant MEMS mass sensor. Sens Actuators A 102:139–150
Acknowledgments
The research was funded by the country of Lower Austria (NÖ), the European Regional Development Fund (ERDF) and the Austrian Science Fund (FWF): L477-N14.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Stifter, M., Keplinger, F., Steiner, H. et al. Principles of nonlinear MEMS-resonators regarding magnetic-field detection and the interaction with a capacitive read-out system. Microsyst Technol 20, 783–791 (2014). https://doi.org/10.1007/s00542-013-2034-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-013-2034-2