The process of gas cooling with a liquid in a countercurrent packed column (scrubber), where the phases are in direct contact, is described. The system of differential equations for heat transfer in gas and liquid phases and moisture mass transfer is given. Equations for determining the fields of gas enthalpy distribution, liquid temperature, moisture content in the gas along the packed bed height are derived through transition to a cellular model. The adequacy of the proposed equations is validated in practice. The packed column is updated, which involved replacement of plates by packings produced by OOO IVTs Inzhekhim (EPC Chemical Engineering LLC), which enhanced the efficiency of pyrogas cooling with water in ethylene production.
Similar content being viewed by others
References
D. I. Shpilin and V. A. Pronin, “Enhancing efficiency of cleaning and deodorization of gas-air emissions of food-processing enterprises in irrigated packed-type columns having polymeric packing,” Nauch. Zh. NIU ITMO, No. 4, 195–203 (2014).
A. V. Tsygankov, V. A. Pronin, D. I. Shpilin, and A. E. Aleshin, “Hydrodynamic calculation of irrigated column having porous packing bodies,” Vestn. MAX, No. 2, 34–36 (2014).
D. I. Shpilin, V. A. Pronin, and O. V. Dolgovskaya, “Improving packed absorption systems of gas cleaning in life support systems,” Vestn. Mezhdunarod. Akad. Kholoda, No. 1, 45–48 (2017).
R. I. Nigmatulin, Dynamics of Multiphase Media [in Russian], Nauka, Moscow (1987), p. 464.l
Yu. A. Komissarov, L. S. Gordeev, and D. P. Vent, Processes and Apparatuses of Chemical Engineering: A Textbook for Vuz (Higher Educational Institutions) [in Russian], edited by Yu. A. Komissarov, Khimiya, Moscow (2011).
I. A. Aleksandrov, Fractionation and Absorption Apparatuses. Methods of Calculation and Fundamentals of Designing [in Russian], Khimiya, Moscow (1971).
V. P. Isachenko, Heat Exchange during Condensation [in Russian], Énergiya, Moscow (1977).
V. B. Kogan, Theoretical Foundations of Typical Processes of Chemical Engineering [in Russian], Khimiya, Leningrad (1977).
A. G. Laptev, M. M. Basharov, E. A. Lapteva, and T. M. Farakhov, Models and Efficiency of Interphase Transfer Processes, Pt. 1. Hydromechanical Processes [in Russian], Center of Innovative Technologies, Kazan (2017).
A. G. Laptev and T. M. Farakhov, “Mathematical model of heat transfer in channels with packing and granular beds,” Teploénergetika, No. 1, 77–80 (2015).
A. G. Laptev and, E. A. Lapteva, Applied Aspects of Transfer Phenomena in Chemical Engineering and Thermal Engineering (Hydromechanics and Heat and Mass Transfer) [in Russian], Pechat’-Servis XXI Vek, Kazan (2015).
A. M. Kagan, A. G. Laptev, A. S. Pushnov, and M. I. Farakhov, Contact Packings of Industrial Heat and Mass Transfer Apparatuses [in Russian], Otechestvo, Kazan (2013).
This study was carried out within the framework of the Russian Science Foundation Research Project RNF18-79-10136: Theoretical Modeling and Development of Efficient Import-Substituting Equipment for Cleaning and Thorough Processing of Hydrocarbon Stocks at Enterprises of the Fuel-Energy Complex.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 55, No. 4, pp. 12−15, April, 2019.
Rights and permissions
About this article
Cite this article
Farakhov, T.M., Laptev, A.G. Modeling of Processes of Gas Cooling by Contact with a Liquid and Updating of Column Apparatuses. Chem Petrol Eng 55, 282–289 (2019). https://doi.org/10.1007/s10556-019-00616-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-019-00616-7