Abstract
A new activated carbon from local cypress cones (CCAC) was prepared using phosphoric acid as a chemical activating agent. It presented a Brunauer, Emmett and Teller surface area (SBET) equal to 379.5117 ± 2.3509 m2 g−1 with an amorphous nature. Scanning electron microscopy analysis revealed a heterogeneous and random shape of pores. The reduction in colour and chemical oxygen demand (COD) from the industrial aqueous effluent from the textile company “COTITEX” was the principal performance study of the resulting material. The kinetic data of the adsorption process obeyed a pseudo-second-order model with R2 of 0.988. From five studied parameters, only the initial COD concentration, the pH and the temperature influenced the COD reduction at equilibrium. Maximum COD and colour removal, respectively, 19% and 80.4% were recorded under optimal adsorption conditions of 2 g L−1 of the adsorbent amount, 323°K of operating temperature, pH = 11 and a stirring speed = 300 rpm. The present study showed that CCAC could be a proper material for coloured effluent treatment, whereas, for a better COD reduction, pretreatment is required.
Similar content being viewed by others
References
Avinash, A. K., Kadama, H. S. L., Lee, D. S., & Govindwar, P. S. (2015). Zinc chloride as a coagulant for textile dyes and treatment of generated dye sludge under the solid state fermentation: Hybrid treatment strategy. Bioresource Technology, 2176, 38–46.
Ayers, R. S., & Westcot, D. W. (1985). Water quality for agriculture. Rome: Food and Agriculture Organization of the United Nations.
Azimi, S. C., Shirini, F., & Pendashteh, A. (2019). Evaluation of COD and turbidity removal from woodchips wastewater using biologically sequenced batch reactor. Process Safety and Environmental Protection, 128, 211–227.
Babic, B. M., Milonjic, S. K., Polovina, M. J., & Kaludierovic, B. V. (1999). Point of zero charge and intrinsic equilibrium constants of activated carbon cloth. Carbon, 37, 477–481.
Belhamdi, B., Zoulikha, M., Hamza, L., & Mohamed, T. (2019). The removal and adsorption mechanisms of free amino acid l-tryptophan from aqueous solution by biomass-based activated carbon by H3PO4 activation: Regeneration study. Physics and Chemistry of the Earth, Parts A/B/C (in press)
Chen, J. J., Wang, X. L., Liu, X. Y., Huang, J. G., & Xie, Z. M. (2015). Removal of dye wastewater COD by sludge base carbon. Journal of Coastal Research, 73, 1–3.
Daud, N. K., Akpan, U. G., & Hameed, B. H. (2012). Decolorization of Sunzol Black DN conc. in aqueous solution by Fenton oxidation process: Effect of system parameters and kinetic study. Desalin Water Treat, 37, 1–7.
De Souza, M. T. F., De Almeida, C. A., & Ambrosio, E. (2016). Extraction and use of Cereus peruvianus cactus mucilage in the treatment of textile effluents. Journal of the Taiwan Institute of Chemical Engineers, 67, 174–183.
Ellouze, E., Ellouze, D., Jrad, A., & Ben Amar, R. (2011). Treatment of synthetic textile wastewater by combined chemical coagulation/membrane processes. Desalination and Water Treatment, 33, 118–124.
Fernandez, M. E., Nunell, G. V., Bonelli, P. R., & Cukierman, A. L. (2010). Effectiveness of Cupressus sempervirens cones as biosorbent for the removal of basic dyes from aqueous solutions in batch and dynamic modes. Bioresource Technology, 101, 9500–9507.
Fukahori, S., Fujiwara, T., Ito, R., & Funamizu, N. (2011). pH-Dependent adsorption of sulfa drugs on high silica zeolite: Modeling and kinetic study. Desalination, 275, 237–242.
Galán, J., Rodríguez, A., Gómez, J. M., Allen, S. J., & Walker, G. M. (2013). Reactive dye adsorption onto a novel mesoporous carbon. Chemical Engineering Journal, 219, 62–68.
Harrelkas, F., Azizi, A., Yaacoubi, A., Benhammou, A., & Pons, M. N. (2009). Treatment of textile dye effluents using coagulation-flocculation coupled with membrane processes or adsorption on powdered activated carbon. Desalination, 235, 330–339.
Hayat, H., Mahmood, Q., Pervez, A., Bhatti, Z. A., & Baig, S. A. (2015). Comparative decolorization of dyes in textile wastewater using biological and chemical treatment. Separation and Purification Technology, 154, 149–153.
Hejazifar, M., & Azizian, S. (2012). Adsorption of cationic and anionic dyes onto the activated carbon prepared from Grapevine Rhytidome. Journal of Dispersion Science and Technology, 33, 846–853.
Holkar, C. R., Jadhav, A. J., Pinjari, D. V., Mahamuni, N. M., & Pandit, A. B. (2016). A critical review on textile wastewater treatments: Possible approaches. Journal of Environmental Management, 182, 351–366.
Karthikeyan, S., Titus, A., Gnanamani, A., Mandal, A. B., & Sekaran, G. (2011). Treatment of textile wastewater by homogeneous and heterogeneous Fenton oxidation processes. Desalination, 281, 438–445.
Kebedea, T. G., Dube, Simiso, Mengistie, Alemayehu Abebaw, Nkambule, Thabo T. I., & Nindi, Mathew Muzi. (2018). Moringa stenopetala bark: A novel green adsorbent for the removal of metal ions from industrial effluents. Physics and Chemistry of the Earth, 107, 45–57.
Khellouf, M., Chemini, R., Salem, Z., Khodja, M., & Zeriri, D. (2019). Optimization of preparation and application of activated carbon derived from cypress cones. Algerian Journal of Environmental Science and Technology, 5(1), 841–851.
Liu, X. H., Dong, W., Zhang, L. L., Kong, Q., & Wang, W. L. (2017). Efficient adsorption of sulfamethazine onto modified activated carbon: A plausible adsorption mechanism. Nature Scientific Reports, 7, 1–12.
Mahmoodi, N. M. (2015). Surface modification of magnetic nanoparticle and dye removal from ternary systems. Journal of Industrial and Engineering Chemistry, 27, 251–259.
Manera, C., Andrezza, P. T., Perondi, Daniele, & Marcelo, G. (2018). Adsorption of leather dyes on activated carbon from leather shaving wastes: Kinetics, equilibrium and thermodynamics studies. Journal Environmental Technology, 40, 2756–2768.
Mansour, H. B., Houas, I., Montassar, F., Ghedira, K., Barillier, D., Mosrati, R., et al. (2012). Alteration of in vitro and acute in vivo toxicity of textile dyeing wastewater after chemical and biological remediation. Environmental Science and Pollution Research, 19, 2634–2643.
Mor, S., Chhavi, M. K., Sushil, K. K., et al. (2018). Assessment of hydrothermally modified fly ash for the treatment of methylene blue dye in the textile industry wastewater. Environment, Development and Sustainability, 20, 625–639.
Naresh Yadav, D., Anand Kishore, K., Bethi, B., et al. (2018). ZnO nanophotocatalysts coupled with ceramic membrane method for treatment of Rhodamine-B dye waste water. Environment, Development and Sustainability, 20, 2065–2078.
Nigam, P., Amour, G., Banat, I. M., Singh, D., Marchant, R., McHale, A. P., et al. (2000). Physical removal of textile dyes from effluents and solid-state fermentation of dye-adsorbed agricultural residues. Bioresource Technology, 72, 219–226.
Pelaez-Cid, A. A., Herrera-Gonzalez, A. M., Salazar-Villanueva, M., & Bautista-Hernandez, A. (2016). Elimination of textile dyes using activated carbons prepared from vegetable residues and their characterization. Journal of Environmental Management, 181, 269–278.
Prahas, D., Kartika, Y., Indraswati, N., & Ismadji, S. (2008). Activated carbon from jackfruit peel waste by H3PO4 chemical activation: Pore structure and surface chemistry characterization. Chemical Engineering Journal, 140, 32–42.
Şahinkaya, S. (2013). COD and color removal from synthetic textile wastewater by ultrasound assisted electro-Fenton oxidation process. Journal of Industrial and Engineering Chemistry, 19, 601–605.
Saleh, T. A. (2015). Isotherm, kinetic and thermodynamic studies on Hg(II) adsorption from aqueous solution by silica-multiwall carbon nanotubes. Environmental Science and Pollution Research International, 22(21), 16721–16731.
Sathishkumar, P., Arulkumar, M., & Palvannan, M. T. (2012). Utilization of agro-industrial waste Jatropha curcas pods as an activated carbon for the adsorption of reactive dye Remazol Brilliant Blue R (RBBR). Journal of Cleaner Production, 22, 67–75.
Saygili, H., Guzel, F., & Onal, Y. (2015). Conversion of grape industrial processing waste to activated carbon sorbent and its performance in cationic and anionic dyes adsorption. Journal of Cleaner Production, 93, 84–93.
Sharma, A., Sharma, G., Naushad, M., Ghfar, A. A., & Pathania, D. (2017). Remediation of anionic dye from aqueous system using bio-adsorbent prepared by microwave activation. Environmental Technology. https://doi.org/10.1080/09593330.2017.1317293.
Sing, K. S. W., Everett, D. H., Haul, R., Moscou, L., Pierotti, R. A., RouqueroL, J., et al. (1985). Reporting Physisorption data for gas/solid systems with special reference to the determination of surface area and porosity. Pure and Applied Chemistry, 57, 603–619.
Streicher, J., Ruhl, A. S., Gnirß, R., & Jekel, M. (2016). Where to dose powdered activated carbon 710 in a wastewater treatment plant for organic micro-pollutant removal. Chemosphere, 711(156), 88–94.
Subramonian, W., & Wu, T. Y. (2014). Effect of enhancers and inhibitors on photocatalytic sunlight treatment of methylene blue. Water, Air, & Soil Pollution, 225, 1–15.
Teixeira, V. G., Coutinho, F. M. B., & Gomes, A. S. (2001). The most important methods for the characterization of porosity of styrene-divinylbenzene based resins. Quimica Nova, 24, 808–818.
Volmajer, J., Majcen Le Marechal, A., Križanec, B., & Vajnhandl, S. (2012). The applicability of an advanced oxidation process for textile finishing waste streams & fate of persistent organic pollutants. International Journal of Environmental Resources, 6(4), 863–874.
Wang, W. L., Liu, Y., Liu, X. H., Deng, B. J., Lu, S. Y., Zhang, Y. R., et al. (2018). Equilibrium adsorption study of the adsorptive removal of Cd2 + and Cr6 + using activated carbon. Environmental Science and Pollution Research International, 25, 25538–25550.
Waring, D. R., & Hallas, G. (2013). The chemistry and application of dyes. Berlin: Springer.
Wawrzkiewicz, M., Wiśniewska, M., & Gun’ko, V. M. (2015). Adsorptive removal of acid, reactive and direct dyes from aqueous solutions and wastewater using mixed silica-alumina oxide. Powder Technology, 278, 306–315.
Zhao, X. T., Zeng, T., Li, X. Y., Hu, Z. J., Gao, H. W., & Xie, Z. (2012). Modeling and mechanism of the adsorption of copper ion onto natural bamboo sawdust. Carbohydrate Polymers, 89, 185–192.
Acknowledgements
The authors would like to thank Nabila SAIDI and Amina MOURAYA form URDD Sonatrach, for technical assistance in characterization analysis. The authors would like to thank Cyril VAULOT from IS2M, for the N2 adsorption–desorption experiments.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Khellouf, M., Chemini, R., Salem, Z. et al. A new activated carbon prepared from cypress cones and its application in the COD reduction and colour removal from industrial textile effluent. Environ Dev Sustain 23, 7756–7771 (2021). https://doi.org/10.1007/s10668-020-00944-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10668-020-00944-2