Abstract
The composition of various gas effluents and their flow parameters viz. flow rate, pressure and Mach number are very crucial in determining the output of high power infrared gas lasers. PC based real time gas Flow Control and Analysis (FCA) System which is the heart of the high power infrared gas lasers such as CO2 Gas Dynamic Laser (10.6μm), Hydrogen Fluoride-Deuterium Fluoride (2.7–3.4μm) and Chemical Oxygen Iodine Laser (1.315μm) has been developed and successfully tested for its applications in Chemical Oxygen Iodine Laser (COIL). The system has been realized using the state of the art PCI bus based high-speed data processing electronics, a personal computer and electro-pneumatic components. The system has demonstrated its capability of controlling the flow rates in the range of 1-6500 lpm (in case of nitrogen) with a response time of 50 msec which is mainly limited by the response of the electro-pneumatic valves and pressure reducers used in the present system. The developed system also has the potential to monitor, estimate and display various flow parameters at critical locations of the laser system. More than 600 successful power runs of the COIL have been given using the developed FCA system.
Similar content being viewed by others
References
1. R. Rajesh, M. Hussain, Z. H. Zaidi, R. K. Tyagi, Gaurav Singhal, Mainuddin, A.L. Dawar and M. Endo “Characterization and Studies of Hydro dynamically Stable Operation of an Angular Jet SOG for COIL”, Published in Oct’2004 in International Journal of Infrared and Millimeter waves.
2. McDermott W.E, Pchelkin N R, Benard D J, Bonsek R R “An Electronic Transition Chemical Laser” Applied Physics Letters, 32 (1978), 496.
3. Shapiro A.H., (1953) The Dynamics and Thermodynamics of Compressible Fluid Flow, Vol.I, Ronald Press, New York.
4. S.M. Yahya, (1998), Fundamentals of Compressible Flow, New Age International (P) Ltd, 2nd Edition.
5. R.W.F. Gross and J.F. Bott (ed.) (1976), Handbook of Chemical Lasers. NY: John Wiley & Sons.
6. Wilson L.E and Hook D.L., (1976) Deuterium Flouride CW Chemical Lasers. AIAA Paper 76-344, Sandiago, California.
7. R.K. Tyagi, R. Rajesh, Gaurav Singhal, Mainuddin, A. L. Dawar and M. Endo, (2003) Design and realization of a 500W class Jet type singlet oxygen generator with angular exit, SPIE Proceedings, 4971
8. R.K. Tyagi, R. Rajesh, Gaurav Singhal, Mainuddin, A. L. Dawar and M. Endo, (2003), COIL with angular Jet singlet oxygen generator, Optics and Laser Technology, 35 (5), 395
9. D.L. Carroll, D.M. King, L.Fockler, D. Stromberg, W.C. Solomon, L.H. Sentman and C.H. Fisher, (2000), High Performance Chemical Iodine laser using Nitrogen diluent for commercial applications, IEEE Journal of Quantum Electronics, 36, 40
10. M.V. Zagidullin, V.D. Nikolaev, M.I. Svistun, N.A. Khvatov, (2000), Supersonic oxygen-iodine 1.4 kW laser with a 5 cm gain length, Soviet Journal of Quantum Electronics, 30, 161
11. S.Yoshida, M.Endo, T. Sawano, S. Amano and H. Fuji, (1989), Chemical oxygen iodine laser of extremely high efficiency, Journal of Applied Physics, 65, 870.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mainuddin, I., Beg, M., Moinuddin, I. et al. Real Time Gas Flow Control and Analysis for High Power Infrared Gas Lasers. Int J Infrared Milli Waves 26, 91–105 (2005). https://doi.org/10.1007/s10762-004-2038-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10762-004-2038-1