Abstract
In order to achieve improved properties and performance with WC-based cemented carbides, research efforts have been directed towards the development of nanostructured cemented carbides. With the recent development of ‘spray conversion process’ for synthesizing nanosized powders and the advent of spark plasma sintering technique, it has been possible to successfully develop bulk nanostructured cemented carbides, possessing improved hardness and wear resistance. On a different note, realisation of the fact that the presence of metallic binder phase is deleterious towards certain applications of WC-based cermets has led to a recent surge of interest towards the development of novel ‘binderless’ WC-based ceramics by replacing the metallic binder phase with ceramic sinter-additives. More recently, it has been possible to develop dense WC-based ceramic composites without considerable deterioration of fracture toughness in the absence of the metallic binder phase. In the above perspective, the present review focuses mainly on the recent research results concerned with the processing and characterisation of nanostructured WC-based cermets and binderless WC-based ceramic composites.
Similar content being viewed by others
References
Telle R (1994) In: Cahn RW, Haasen P, Kramer EJ (eds) Materials science and technology, vol 11: structure and properties of ceramics. VCH, Weinheim, Germany, p 175
Sarin VK (1981) In: Chin DY (ed) Cemented carbide cutting tools, advances in powder technology. ASM, Materials park, OH, p 253
Basu B, Raju GB, Suri AK (2006) Int Mater Rev 51:352
Prakash LJ (1995) Int J Ref Met Hard Mater 13:257
Pastor H, Prakash LJ (2010–2011) International powder metallurgy directory, 14th ed
Schubert WD, Bock A, Lux B (1995) Int J Ref Met Hard Mater 13:281
Bounhoure V, Lay S, Loubradou M, Missiaen JM (2008) J Mater Sci 43:892. doi:10.1007/s10853-007-2181-x
Lenel FV (1980) Powder metallurgy principles and applications. Metal Powder Industries Federation, Princeton, NJ, p 383
Siegl LS, Schwetz KA (1991) Powder Metall Int 23:221
Einarsrud M, Hagen E, Pettersen G, Grande T (1997) J Am Ceram Soc 80:3013
Jia K, Fischer TE, Gallois B (1998) Nanostruct Mater 10:875
Mukhopadhyay A, Basu B (2007) Int Mater Rev 52:257
Niihara K (1991) J Ceram Soc Japan 99:974
Sternitzke M (1997) J Eur Ceram Soc 17:1061
Mukhopadhyay A, Basu B (2006) Proc Indian Natl Sci Acad 72:97
Mukhopadhyay A (2008) Tribol Mater Surf Interfaces 2:169
Kim BK, Ha GH, Lee DW (1997) J Mater Process Technol 63:317
Berger S, Porat R, Rosen R (1997) Prog Mater Sci 42:311
Cha SI, Hong SH, Kim BK (2003) Mater Sci Eng A 351:31
Cha SI, Hong SH, Ha GH, Kim BK (2001) Scripta Mater 44:1535
Shi XL, Shao GQ, Duan XL, Yuan RZ, Lin HH (2005) Mater Sci Eng A 392:335
Kim HC, Shon IJ, Yoon JK, Doh JM (2007) Int J Ref Met Hard Mater 25:46
Kim HC, Jeong IK, Shon IJ, Ko IY, Doh JM (2007) Int J Ref Met Hard Mater 25:336
Sivaprahasam D, Chandrasekar SB, Sundaresan R (2007) Int J Ref Met Hard Mater 25:144
Xueming MA, Gang JI, Yuanda D (1998) J Alloys Compd 264:267
Shao GQ, Duan XL, Xie JR, Yu XH, Zhang WF, Yuan RZ (2003) Rev Adv Mater Sci 5:281
Goren-Muginstein GR, Berger S, Rosen A (1998) Nanostruct Mater 10:795
Kim HC, Oh DY, Shon IJ (2004) Int J Ref Met Hard Mater 22:197
Zhang FL, Wang CY, Zhu M (2003) Scripta Mater 49:1123
Ritcher V, Ruthendorf MV (1999) Int J Ref Met Hard Mater 17:141
Scussel HJ (1992) Friction and wear of cemented carbides. ASM Handbook, vol 18. ASM International, Materials Park, OH, p 796
Gao L, Kear BH (995) In: Bose A, Dowding RJ (eds) Tungsten refract. Met. 3, proceedings international conference, 3rd (Pub. 1996). Metal Powder Industries Federation, Princeton, NJ, p 247
Kear BH, Strutt PR (1995) Nanostruct Mater 6:227
Kear BH, McCandlish LE (1993) Nanostruct Mater 3:19
McCandlish LE, Kevorkian V, Jia K, Fischer TE (1994) Adv Powder Metall Part Mater 5:329
McCandlish LE, Kear BH, Bhatia SJ (1994) US Patent 5,352,269
McCandlish LE, Kear BH, Bhatia SJ (1991) S African ZA 91 00,722 (Cl. B01D), 27, Appl. 91/722, 37 pp
Seegopaul P, McCandlish LE (1995) Adv Powder Metall Part Mater 3:13/3
Zhu YT, Manthiram A (1994) J Am Ceram Soc 77:2777
McCandlish LE, Kear BH, Kim BK (1990) Mater Sci Technol 6:953
Gao L, Kear BH (1997) Nanostruct Mater 9:205
Suzuki H (1986) Cemented carbide and sintered hard materials. Maruzen, Tokyo, Japan, p 262
Suzuki H, Hayashi K, Yamamoto T, Nakajo NJ (1966) J Japan Soc Powder Powder Metall 13:290
ASM International Handbook Committee (1987) Metals handbook, 9th edn, vol 13. Corrosion. p 855
Masumoto Y, Takechi K, Imasato S (1986) Nippon Tungsten Rev 19:26
Imasato S, Tokumoto K, Kitada T, Sakaguchi S (1995) Int J Ref Met Hard Mater 13:305
Kim HC, Shon IJ, Garay JE, Munir ZA (2004) Int J Ref Met Hard Mater 22:257
Kim HC, Shon IJ, Yoon JK, Lee SK, Munir ZA (2006) Int J Ref Metal Hard Mater 24:202
Mukhopadhyay A, Chakravarty D, Basu B (2010) J Am Ceram Soc 93:1754
Cha SI, Hong SH (2003) Mater Sci Eng A 356:381
Biswas K, Mukhopadhyay A, Basu B, Chattopadhyay K (2007) J Mater Res 22:1491
Venkateswaran T, Sarkar D, Basu B (2005) J Am Ceram Soc 88:691
Basu B, Venkateswaran T, Sarkar D (2005) J Eur Ceram Soc 25:1603
El-Eskandarany MS (2000) J Alloys Compd 296:175
El-Eskandarany MS (2005) J Alloys Compd 391:228
Massalski TB (ed) (1990) Binary alloy phase diagrams, vol 1: alloys, vol 2: phase diagrams. ASM International, Materials Park, OH
Kurlov AS (2006) Inorg Mater 42:156
Exner HE (1979) Int Metal Rev 4:149
Sommer M, Schubert WD, Zobetz E, Warbichler P (2002) Int J Ref Metal Hard Mater 20:41
Herber RP, Schubert WD, Lux B (2006) Int J Ref Metal Hard Mater 24:360
Engqvist H, Ederyd S, Axen N, Hogmark S (1999) Wear 230:165
Klaer P, Kiefer F, Stjernberg K, Oakes JJ (1999) Adv Powder Metal Part Mater 3:10/51
Shatov AV, Firstov SA, Shatova IV (1998) Mater Sci Eng A 242:7
Arato P, Bartha L, Porat R, Berger S, Rosen A (1998) Nanostruct Mater 10:245
Porat R, Berger S, Rosen A (1996) Nanostruct Mater 7:429
Ravichandran KS (1994) Acta Metall Mater 42:143
Almond EA, Roebuck B (1998) Mater Sci Eng A 105:237
Gille G, Bredthauer J, Gries B, Mende B, Heinrich W (2000) Int J Ref Met Hard Mater 18:87
Goeuriot P, Thevenot F (1987) Ceram Int 13:99
Kim HC, Shon IJ, Yoon JK, Doh JM, Munir ZA (2006) Int J Ref Met Hard Mater 24:427
Jiang G, Zhuang H, Li W (2003) Mater Sci Eng A 360:377
Uhrenius B, Pastor H, Pauty E (1997) Int J Ref Met Hard Mater 15:139
El-Eskandarany MS, Mahday AA, Ahmed HA, Amer AH (2000) J Alloys Compd 312:315
Sun J, Zhang F, Shen J (2003) Mater Lett 57:3140
Enayati MH, Aryanpour GR, Ebnonnasir A (2009) Int J Ref Met Hard Mater 27:159
Cho KH, Lee JW, Chung IS (1996) Mater Sci Eng A 209:298
Krishnamachari B, McLean J, Cooper B, Sethna J (1996) Phys Rev B 54:8899
Stiglich JJ, Yu CC, Sudarshan TS (1995) In: Bose A, Dowding RJ (eds) Tungsten refract. Met. 3 Proceedings of international conference, 3rd 1995 (Pub. 1996). Metal Powder Industries Federation, Princeton, NJ, p 229
Ryu T, Sohn HY, Hwang KS, Fang ZZ (2008) J Mater Sci 43:5185. doi:10.1007/s10853-008-2741-8
Rowlinson JS, Widom B (1982) Molecular theory of capillarity, chap 2. Clarendon Press, Oxford, p 25
Rahaman MN (2003) Ceramic processing and sintering, 2nd edn. Marcel Dekker Inc, New York, USA
Wang X, Fang ZZ, Sohn HY (2008) Int J Ref Met Hard Mater 26:232
Lee GH, Kang S (2006) Int J Ref Met Hard Mater 419:281
Lay S, Loubradou M, Donnadieu P (2004) Adv Eng Mater 6:811
Elfwing M, Norgren S (2005) Int J Ref Met Hard Mater 23:242
Hashe NG, Neethling JH, Berndt PR, Andren HO, Norgren S (2007) Int J Ref Met Hard Mater 25:207
Yamamoto T, Ikuharaa Y, Sakuma T (2000) Sci Technol Adv Mater 1:97
Lay S, Hamar-Thibault S, Lackner A (2002) Int J Ref Met Hard Mater 20:61
Jaroenworaluck A, Yamamoto T, Ikuhara Y, Sakuma T, Taniuchi T, Okada K, Tanase T (1998) J Mater Res 13:2450–2452
Shiga S, Masuyama K, Umemoto M, Yamazaki K (1996) In: German RM, Messing GL, Cornwall RG (eds) Sintering technology. Marcel Dekker, New York, p 431
Maizza G, Grasso S, Sakka Y (2008) J Mater Sci 44:1219. doi:10.1007/s10853-008-3179-8
Groza JR (1998) ASM materials handbook, vol 7. ASM International, Materials Park, OH, p 583
Nygren M, Shen Z (2003) Solid State Sci 5:125
Munir ZA, Tamburini UA (2006) J Mater Sci 41:763. doi:10.1007/s10853-006-6555-2
Vanmeensel K, Laptev A, Biest OVD, Vleugels J (2007) J Eur Ceram Soc 27:979
Rathel J, Herrmann M, Beckert W (2009) J Eur Ceram Soc 29:1419
Reddy KM, Kumar N, Basu B (2010) Scripta Mater 62:435
Reddy KM, Mukhopadhyay A, Basu B (2010) J Eur Ceram Soc 30:3363
Jain D, Reddy KM, Mukhopadhyay A, Basu B (2010) Mater Sci Eng A 528:200
Sun L, Jia CC, Xian M (2007) Int J Ref Met Hard Mater 25:121
Michalski A, Siemiaszko D (2007) Int J Ref Met Hard Mater 25:153
Wang Y, Heusch M, Lay S, Allibert CH (2002) Phys Stat Sol 193:271
Kim CS, Rohrer GS (2004) Interface Sci 12:19
Christensen M, Wahnstrom G (2004) Acta Mater 52:2199
Kim JD, Kang SJL (2005) J Am Ceram Soc 88:500
Vicens J, Benjdir M, Nouet G, Dubon A, Laval JY (1994) J Mater Sci 29:987. doi:10.1007/BF00351421
Milman YV, Chugunova S, Goncharuck V, Luyckx S, Northrop I (1997) Int J Ref Met Hard Mater 15:97
Milman YV, Luyckx S, Northrop I (1999) Int J Ref Met Hard Mater 17:39
Roebuck B (2006) Int J Ref Met Hard Mater 24:101
Gille G, Szesny B, Leitner G (1999) J Adv Mater 31:9
Bardzil PB, Gurland J (1955) Trans Met Soc AIME 203:311
Fischmeister H, Exner HE (1966) Arch Eisenhuttenwes 37:499
Mukhopadhyay A, Raju GB, Basu B, Suri AK (2009) J Eur Ceram Soc 29:505
Mukhopadhyay A, Basu B, Bakshi SD, Mishra SK (2007) Int J Ref Metal Hard Mater 25:179
Quinn GD, Bradt RC (2007) J Am Ceram Soc 90:673
Lawn BR (1992) Fracture of brittle solids, 2nd edn. Cambridge University Press, Cambridge, UK
Niihara K, Morena R, Hasselmann DPH (1982) J Mater Sci Lett 1:13
Cutler RA, Virkar AV (1985) J Mater Sci 20:3557. doi:10.1007/BF01113762
Fischer TE, Jia K (1996) Wear 200:206
Sheikh-Ahmed JY, Bailey JA (1999) Wear 225–229:256
Jia K, Fischer TE (1997) Wear 203–204:310
Yang Q, Sneda T, Ohmori A (2003) Wear 254:23
Pirso J, Letunovits S, Viljus M (2004) Wear 257:257
Gant AJ, Gee MG, Roebuck B (2005) Wear 258:178
Gant AJ, Gee MG, Roebuck B (2007) Wear 263:137
Kanemitsu Y, Nishimura T, Yoshino H, Takao K, Masumoto Y (1982) Refract Hard Metals 1:66
Zhu SG, Wu CX, Luo YL (2010) J Mater Sci 45:1817. doi:10.1007/s10853-009-4164-6
Hannink RHJ, Kelly PM, Muddle BC (2000) J Am Ceram Soc 83:461
Basu B (2005) Int Mater Rev 50:239
Mukhopadhyay A, Todd RI (2010) J Eur Ceram Soc 30:1359
Malek O, Lauwers B, Perez Y, Baets PD, Vleugels J (2009) J Eur Ceram Soc 29:3371
Yang F, Zhao J, Ai X, Yuan X (2009) J Mater Proc Technol 209:2161
Yang FZ, Zhao J, Ai X (2009) J Mater Proc Technol 209:4531
Malek O, Vleugels J, Perez Y, Baets PD, Liu J, Berghe SVD, Lauwers B (2010) Mater Chem Phys 123:114
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mukhopadhyay, A., Basu, B. Recent developments on WC-based bulk composites. J Mater Sci 46, 571–589 (2011). https://doi.org/10.1007/s10853-010-5046-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-010-5046-7