Skip to main content
Log in

Exploring the relationship between applied fabric strain and resultant local yarn strain within the elastic fabric based on finite element method

  • Polymers & biopolymers
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

As kinds of unique textiles with high extensibility and elasticity, elastic fabrics are widely used for sportswear, medical textiles and electronic textiles. The tensile behavior of fabric is very important for post-processing and usage of fabric. However, there are very few studies on the resultant yarn strain subjected to the applied fabric extension, which is crucial for understanding the tensile behavior of elastic fabric and expanding its potential applications. In order to address the tensile behavior of elastic fabric, a mechanical model of fabric was built for the analysis of local yarn strain within the fabric through finite element method (FEM). The FEM models with full consideration of the tensile property of elastic yarns were built to predict the relationship between the applied fabric strain and the resultant yarn strain. An experimental study was conducted to characterize the yarn deformation behavior during the fabric stretching and compare with the FEM prediction. The FEM simulations show a good agreement with the experimental results. Based on the FEM models, the effects of fabric structural parameters on such a relationship were investigated for understanding the deformation mechanism and thus optimizing the tensile properties of fabrics. A yarn strain of 27.5% could be achieved under 60% fabric strain by adopting an optimized warp yarn spacing of 0.8 mm. The results not only shed light on the origin of high extensibility and elasticity of fabrics but are of great value to the design and development of elastic materials for various applications such as textile-based electronics.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14

Similar content being viewed by others

References

  1. Zhao L, Hu H, Shen J, Rong H (2013) The use of a polytrimethylene terephthalate/polyester bi-component filament for the development of seamless garments. Text Res J 83:1283–1296

    Article  CAS  Google Scholar 

  2. Senthilkumar M, Anbumani N, Hayavadana J (2011) Elastane fabrics-a tool for stretch applications in sports. Indian J Fiber Text 36:300–307

    CAS  Google Scholar 

  3. Xiong Y, Tao X (2018) Compression garments for medical therapy and sports. Polymers 10:663

    Article  Google Scholar 

  4. Li XT, Hu HB, Hua T, Xu BG, Jiang SX (2018) Wearable strain sensing textile based on one-dimensional stretchable and weavable yarn sensors. Nano Res 11:5799–5811

    Article  CAS  Google Scholar 

  5. Lee H, Glaspe MJ, Li XD, Nychk JA, Batcheller J, Chung HJ, Chen Y (2018) Preparation of fabric strain sensor based on graphene for human motion monitoring. J Mater Sci 53:9026–9033. https://doi.org/10.1007/s10853-018-2194-7

    Article  CAS  Google Scholar 

  6. Marmarali AB (2003) Dimensional and physical properties of cotton spandex single jersey fabrics. Text Res J 73:11–14

    Article  CAS  Google Scholar 

  7. Luo J, Wang FM, Li D, Xu BG (2010) Elasticity of woven fabrics made of polytri-methylene terephthalate/polyethylene terephthalate bicomponent filaments. Text Res J 81:865–870

    Google Scholar 

  8. Leung KY (2016) Study on the mechanical properties of elastic woven fabrics. BS Thesis, The Hong Kong Polytechnic University, HK

  9. Kan WS (2018) Design and evaluation of elastic woven fabric substrates for sensing textiles. BS Thesis, The Hong Kong Polytechnic University, HK

  10. Qadir B, Hussain T, Malik M (2014) Effect of elastane denier and draft ratio of core-spun cotton weft yarns on the mechanical properties of woven fabrics. J Eng Fiber Fabr 9:23–31

    Google Scholar 

  11. Almetwally AA, Mourad MM (2014) Effects of spandex drawing ratio and weave structure on the physical properties of cotton/spandex woven fabrics. J Text Inst 105:235–245

    Article  CAS  Google Scholar 

  12. Realff ML (1994) Identifying local deformation phenomena during woven fabric uniaxial tensile loading. Text Res J 64:135–141

    Article  Google Scholar 

  13. Ibrahim SM (1966) Mechanisms of stretch development in fabrics containing spandex yarns. Text Res J 36:696–706

    Article  Google Scholar 

  14. Gorjanc DŠ, Bukošek V (2008) The behaviour of fabric with elastane yarn during stretching. Fibers Text East Eur 16:63–68

    Google Scholar 

  15. Varghese N, Thilagavathi G (2015) Development of woven stretch fabrics and analysis on handle, stretch, and pressure comfort. J Text Inst 106:242–252

    Article  CAS  Google Scholar 

  16. Xiao XL, Hua T, Wang JC, Li L, Au WM (2015) Transfer and mechanical behavior of three-dimensional honeycomb fabric. Text Res J 85:1281–1292

    Article  CAS  Google Scholar 

  17. Jeon BS, Chun SY, Hong CJ (2003) Structural and mechanical properties of woven fabrics employing Peirce’s model. Text Res J 79:929–933

    Article  Google Scholar 

  18. El Messiry M, El-Tarfawy S (2019) Mechanical properties and buckling analysis of woven fabric. Text Res J 89:2900–2918

    Article  Google Scholar 

  19. Naik NK, Yernamma P, Thoram NM, Gadipatri R, Kavala VR (2010) High strain rate tensile behavior of woven fabric E-glass/epoxy composite. Polym Test 29:14–22

    Article  CAS  Google Scholar 

  20. Senthilkumar M, Anbumani N (2011) Dynamics of elastic knitted fabrics for sports wear. J Ind Text 41:13–24

    Article  Google Scholar 

  21. Xiao XL, Hua T, Li L, Wang JC (2015) Geometrical modeling of honeycomb woven fabric architecture. Text Res J 85:1651–1665

    Article  CAS  Google Scholar 

  22. Realff ML, Boyce MC, Backer S (1997) A micromechanical model of the tensile behavior of woven fabric. Text Res J 67:445–459

    Article  Google Scholar 

  23. Tehrani-Dehkordi M, Nosraty H (2015) Tensile behavior simulation of woven fabric with different weave pattern based on finite element method. J Text Polym 3:34–38

    Google Scholar 

  24. Shen Y, Meir AJ, Cao Y, Adanur S (2015) Finite element analysis of monofilament woven fabrics under uniaxial tension. J Text Inst 106:90–100

    Article  CAS  Google Scholar 

  25. Tarfaoui M, Akesbi S (2001) A finite element model of mechanical properties of plain weave. Collides Surf A Physicochem Eng Asp 187–188:439–448

    Article  Google Scholar 

  26. Li YH, Xie CP, Liu XJ (2017) Finite element simulation on tensile mechanical properties of three-elementary weave fabric. J Text Res 38:41–47

    Google Scholar 

  27. Li YH, Xie CP, Liu XJ, Su XZ (2018) Finite element simulation of tensile mechanical properties of silk fabrics and polyester silk-like fabrics. J Silk 55:27–31

    Google Scholar 

  28. Cheng JF, Chai XM, Zhou JM, Chen JY, Zhang HP (2013) Study of tensile property of Kevlar 129 yarn and fabric with finite element analysis method. J Zhenjiang Sci-Technol Univ 30:649–653

    Google Scholar 

  29. Daelemans L, Faes J, Allaoui S, Hivet G, Dierick M, Hoorebeke VL, Paepegem VW (2016) Finite element simulation of the woven geometry and mechanical behaviour of a 3D woven dry fabric under tensile and shear loading using the digital element method. Sci Technol 137:177–187

    Google Scholar 

  30. Perumalsamy E, Sakthivel JC, Anbumai N (2014) Prediction of deformation behavior of single jersey cotton knitted fabrics using finite element method. Int J Cloth Sci Tech 26:222–234

    Article  Google Scholar 

  31. Liu Y, Hu H (2015) Finite element analysis of compression behaviour of 3D spacer fabric structure. Int J Mech Sci 94–95:244–259

    Article  Google Scholar 

  32. Chen Y, Jiang N, Hu H (2019) Mechanical modeling of an auxetic tubular braided structure: experimental and numerical analyses. Int J Mech Sci 160:182–191

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the Research Grants Council of Hong Kong Special Administrative Region Government (Grant No.: PolyU 252024/16E) and The Hong Kong Polytechnic University in the form of an internal project (Grant No.: YVB1).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Tao Hua.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chen, S., Tian, X., Hua, T. et al. Exploring the relationship between applied fabric strain and resultant local yarn strain within the elastic fabric based on finite element method. J Mater Sci 55, 10258–10270 (2020). https://doi.org/10.1007/s10853-020-04738-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-020-04738-9

Navigation