Skip to main content
Log in

Studying the structural, morphological, and optical properties of CuS:Ni nanostructure prepared by a hydrothermal method for biological activity

  • Original Paper:Sol–gel and hybrid materials for biological and health (medical) applications
  • Published:
Journal of Sol-Gel Science and Technology Aims and scope Submit manuscript

Abstract

In recent years, copper sulfide has attracted great interest in biological application, due to its biocompatibility and low toxicity. Undoped and nickel (Ni)-doped copper sulfide nanostructures were synthesized using a hydrothermal method at 150 °C for 15 h. XRD patterns show that all samples have confirmed the formation of a hexagonal phase. Absorbance spectra were measured by using a UV–vis spectrophotometer. The optical bandgap energy of CuS nanostructure decreased with increasing Ni doping concentration. Their optical bandgap energies were 3.2, 3.21, 2.9, and 2.9 eV for undoped and Ni-doped copper sulfide nanostructures with concentrations of 1, 3, and 5%, respectively. The antibacterial activity of CuS nanostructure against E. coli, P. aeruginosa, and S. aureus was evaluated by zone of inhibition. The test revealed that the minimum concentration of CuS nanostructure has a strong antibacterial activity against Gram-positive bacteria than for Gram-negative bacteria. Antitumor treatment was applied based on employing CuS nanostructures by exploiting their unique optical and morphological properties as therapeutic agents against rhabdomyosarcoma (RD) and murine fibroblast (L20B) cancer cell lines without using laser. The cytotoxicity effect was evaluated by MTT assay; the results demonstrated that CuS nanostructure with 1% Ni doping exhibits more toxicity effect than undoped and doped nanostructures, with 3 and 5% for all particle concentrations, where cytotoxicity reaches 34.3% at 0.125 mg/ml, being the most influential concentration, which could be a promising agent for cancer treatment.

Highlights

  • Pure and Ni-doped copper sulfide nanostructures were prepared by a hydrothermal method. Pure and Ni–CuS nanostructures contain 1–3% Ni.

  • To our knowledge, there is no report of biological activity of CuS:Ni nanostructure.

  • The antibacterial activity of CuS nanostructure against E. coli, P. aeruginosa, and S. aureus was evaluated by zone of inhibition. The test revealed that the minimum concentration of CuS nanostructure has a strong antibacterial activity against Gram-positive bacteria than for Gram-negative bacteria.

  • The cytotoxicity effect was evaluated by MTT assay; the results demonstrated that CuS nanostructure with 1% Ni doping exhibits more toxicity effect than undoped and doped nanostructures, with 3 and 5% for all particle concentrations, where cytotoxicity reaches 34.3% at 0.125 mg/ml, being the most influential concentration.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

References

  1. Sreelekha N, Subramanyam K, Reddy DA, Murali G, Ramu S, Varma KR, Vijayalakshmi RP (2016) Structural, optical, magnetic and photocatalyticproperties of Co doped CuS diluted magnetic semiconductornanoparticles. Appl Surf Sci 378:330–340

    Article  Google Scholar 

  2. Chaki SH, Tailor JP, Deshpande MP (2014) Synthesis and characterizations of undoped and Mn doped CuS nanoparticles. Adv Sci Lett 20:959–965

    Article  Google Scholar 

  3. Freeda MA, Mahadevan CK (2013) Effect of Zn2+ dopping on CuS nanocrystals Mater Sci Ind J 9(8):283–288

    Google Scholar 

  4. Huanga Q, Chen H, Zhang YC, Wua CL (2011) CuS nanostructures prepared by a hydrothermal method. J Alloys Compd 509:6382–6387

    Article  Google Scholar 

  5. Han Y, Wang Y, Gao W, Wang Y, Jiao L, Yuan H, Liu S (2011) Synthesis of novel CuS with hierarchical structures and its application in lithium-ion batteries. Powder Technol 212:64–68

    Article  Google Scholar 

  6. Subramanyam K, Sreelekha N, Reddy DA, Murali G, Ramu S, Varma KR, Vijayalakshmi RP (2017) Chemical synthesis, structural, optical, magnetic characteristics and enhanced visible light active photocatalysis of Ni doped CuS nanoparticles Solid State Sci 65:68–78

    Article  Google Scholar 

  7. Zhang YQ, Zhang BP, Ge ZH, Zhu LF, Li Y (2014) Preparation by solvothermal synthesis, growth mechanism, and photocatalytic performance of CuS nanopowders. Eur J Inorg Chem 2014(14):2368–2375

    Article  Google Scholar 

  8. Zhang J, Zhang Z (2008) Hydrothermal synthesis and optical properties of CuS nanoplates. Mater Lett 62:2279–2281

    Article  Google Scholar 

  9. Nafees M, Ali S, Rasheed K, Idrees S (2012) The novel and economical way to synthesize CuS nanomaterial of different morphologies by aqueous medium employing microwaves irradiation. Appl Nanosci 2:157–162

    Article  Google Scholar 

  10. Pal M, Mathews NR, Sanchez-Mora E, Pal U, Paraguay-Delgado F, Mathew X (2015) Synthesis of CuS nanoparticles by a wet chemical route and their photocatalytic activity. J Nanopart Res 17:301

    Article  Google Scholar 

  11. Dhasade SS, Patil JS, Kim JH, Han SH, Rath MC, Fulari VJ (2012) Synthesis of CuS nanorods grown at room temperature by electrodeposition method. Mater Chem Phys 137:353–358

    Article  Google Scholar 

  12. Mao G, Dong W, Kurth DG, Mӧhwald H (2004) Synthesis of copper sulfide nanorod arrays on molecular templates. Nano Lett 4(2):429–252

    Article  Google Scholar 

  13. Shi J, Zhou X, Liu Y, Su Q, Zhang J, Du G (2014) Sonochemical synthesis of CuS/reduced graphene oxide nanocomposites with enhanced absorption and photocatalytic performance. Mater Lett 126:220–223

    Article  Google Scholar 

  14. Lu Y, Meng X, Yi G, Jia J (2011) In situ growth of CuS thin films on functionalized self-assembled monolayers using chemical bath deposition. J Colloid Interface Sci 356:726–733

    Article  Google Scholar 

  15. Elttayef AaK, Ajeel HM, Kudair AE (2013) Preparation and study the structural and optical properties of CuS nano film. Int J Thin Film Sci Technol 2(3):223–231

    Article  Google Scholar 

  16. Memon H, Kumari N, Jatoi A, Khoso NA (2017) Study of the indoor decontamination using nanocoated woven polyester fabric. Int Nano Lett 7:1–7

    Article  Google Scholar 

  17. Memon, H, Kumari N (2016) Study of multifunctional nanocoated cold plasma treated polyester cotton blended curtains. Surf Rev Lett 23(5). https://doi.org/10.1142/S0218625X16500360

  18. Memon, H, Yasin S, Khoso NA, Memon S (2015) Study of wrinkle resistant, breathable, anti-UV nanocoated woven polyester fabric. Surf Rev Lett 23(3). https://doi.org/10.1142/S0218625X16500037

  19. Sabah FA, Ahmed NM, Hassan Z, Rasheed HS (2016) High performance CuS p-type thin film as a hydrogen gas sensor. Sens Actuators A 249:68–76

    Article  Google Scholar 

  20. Lin J, Tao F, Wang L, Chen L, Ying Y, Zhang L, Liu H, Xia M (2013) Solvothermal synthesis of sphere-like CuS microcrystals and improvement as nonenzymatic glucose sensor. J Mater Sci 48:5509–5516

    Article  Google Scholar 

  21. Heiba Z,K, Mohamed M,B (2018) Changes in structural, optical and magnetic properties of nano-CuS upon doping with Mn and Fe: a comparative study. Appl Phys A 124:446. https://doi.org/10.1007/s00339-018-1864-2

    Article  Google Scholar 

  22. Wang Z, Geng D, Zhang Y, Zhang Z (2010) CuS:Ni flowerlike morphologies synthesized by the solvothermal route. Mater Chem Phys 122:241–245

    Article  Google Scholar 

  23. Kandasamy N, Saravanan S (2013) Synthesis and optical properties of vanadium doped covellite nanostructure by wet chemical method. ICANMEET. https://doi.org/10.1109/ICANMEET.2013.6609231

  24. Fathima AS, Sivaguru N, Dr. Kumar VS(2016) Investigation on optical properties of CuS and Zn doped CuS thin films by chemical bath deposition method IOSR-JAP 8(4):13–16

    Article  Google Scholar 

  25. Subramanyam K, Sreelekha N, Reddy DA, Murali G, Ramu S, Varma KR, Kumar AV, Vijayalakshmi RP (2017) Influence of Mn Doping on Structural, Photoluminescence and magnetic characteristics of covellite-phase CuS nanoparticles. J Supercond Nov Magn. https://doi.org/10.1007/s10948-017-4296-x

  26. Priyadharshini P, Rajagopal R(2015) Synthesis and characterization of metal doped nanocrystalline copper sulphide IJRSR 6(4):3328–3331

    Google Scholar 

  27. Brown JW, Ramesh PS, Geetha D (2018) Fabrication of mesoporous iron (Fe) doped copper sulfide (CuS) nanocomposite in the presence of a cationic surfactant via mild hydrothermal method for supercapacitors. Mater Res Express. https://doi.org/10.1088/2053-1591/aaad55

  28. Liu Y, Hussain M, Memon H, Yasin S (2015) Solar irradiation and nageia nagi extract assisted rapid synthesis of silver nanoparticles and their antibacterial activity. Dig J Nanomater Biostruct 10(3):1019–1024

    Google Scholar 

  29. Memon H, Yasin S, Khoso NA, Hussain M (2015) Indoor decontaminating textiles by photo catalytic oxidation. J Nanotechnol 2015:1–9

    Article  Google Scholar 

  30. Memon H, Wang H, Yasin S, Halepoto A (2018) Influence of incorporating silver nanoparticles in protease treatment on fiber friction, antistatic and antibacterial properties of wool fibers. J Chem 2018:1–8

    Article  Google Scholar 

  31. Liu Y, Memon H, Bhavsar P, Yasin S (2016) Fabrication of alginate fibers loaded with silver nanoparticles biosynthesized via dolcetto grape leaves (Vitis vinifera cv.): morphological, antimicrobial characterization and in vitro release studies. Mater Focus 5:216–221

    Article  Google Scholar 

  32. Huang J, Zhou J, Zhuang J, Gao H, Huang D, Wang L, Wu W, Li Q, Yang P, Han M (2017) Strong near-infrared absorbing and biocompatible CuS nanoparticles for rapid and efficient photothermal ablation of gram-positive and -negative bacteria. ACS Appl Mater Interfaces 9:36606–36614

    Article  Google Scholar 

  33. Reshma P, Ashwini K (2017) Cerium oxide nanoparticles: synthesis, characterization and study of antimicrobial activity J Nanomater Mol Nanotechnol 6(3):1–4

    Article  Google Scholar 

  34. Freshney, R (2012). Culture of animal cell. Sixth Edition. Wily-Liss, New York

  35. Chih P, Wei J, Yuang L, Yuh C (2004) The extracts from Nelumbonucifera suppress cell cycle progression, cytokine genes expression, and cell proliferation in human peripheral blood mononuclear cells. Life Sci 75:699–716

    Article  Google Scholar 

  36. Al-jawad SMH, Elttayf AK, Saber AS (2017) Studying structural, optical, electrical, and sensing properties of nanocrystalline SnO2:Cu films prepared by sol–gel method for CO gas sensor application at low temperature. Surf Rev Lett 24:12

  37. Al-jawad SMH, Taha AA, Salim MM (2017) Synthesis and characterization of pure and Fe doped TiO2 thin films for antimicrobial activity. Optik 142:42–53

    Article  Google Scholar 

  38. Al-Jawad SMH (2017) Influence of multilayer deposition on characteristics of nanocrystalline SnO2 thin films produce by sol-gel technique for gas sensor application. Optik 146:17–26

    Article  Google Scholar 

  39. Taha AA, Al-jawad SMH, Salim MM (2017) Influence of titanium tetraisopropoxide concentration on the antibacterial activity of TiO2 thin films. Surf Rev Lett 1850111 8pp. https://doi.org/10.1142/S0218625X18501111

  40. Al-Jawad SMH, Rafic SN, Muhsen MM (2017) Preparation and characterization of polyaniline cadmium sulfide nanocomposite for gas sensor application. Mod Phys Lett B 31(26):1750234. 15pp

    Article  Google Scholar 

  41. Podili S, Geetha D, Ramesh PS (2017) One-pot synthesis of CTAB stabilized mesoporous cobalt doped CuS nano flower with enhanced pseudocapacitive behavior. J Mater Sci 28(2). https://doi.org/10.1007/s10854-017-7424-2

  42. Ayodhya D, Venkatesham M, kumari AS, Reddy GB, Ramakrishna D, Veerabhadram G (2015) Photocatalytic degradation of dye pollutants undersolar, visible and UV lights using green synthesised CuS nanoparticles. J Exp Nanosci 11(6):418–432. https://doi.org/10.1080/17458080.2015.1070312

    Article  Google Scholar 

  43. Huang Y, Lai Y, Shi S, Hao S, Wei J, Chen X (2014) Copper sulfide nanoparticles with phospholipid-PEG coating for in vivo near-infrared photothermal cancer therapy. Chem Asian J 10(2):370–376. https://doi.org/10.1002/asia.201403133

    Article  Google Scholar 

  44. Li F, Tao K, Bi W, Li D, Li Z, Huang X (2009) Synthesis and optical properties of CuS nanoplate-based architectures by a solvothermal method. Appl Surf Sci 255:6285–6289

    Article  Google Scholar 

  45. Al-Jawad SMH (2017) Structural and optical properties of core–shell TiO2/CdS prepared by chemical bath deposition. J Electron Mater 46(10). https://doi.org/10.1007/s11664-017-5597-3

  46. Al-jawad SMH, Mohammad MR, Imran NJ (2018) Effect of electrolyte solution on structural and optical properties of TiO2 grown by anodization technique for photoelectrocatalytic application. Surf Rev Lett 25(7):16. https://doi.org/10.1142/S0218625X18500786

    Google Scholar 

  47. Al-jawad SMH, Elttayf AK, Saber AS (2017) Influence of annealing temperature on the characteristics of nanocrystalline SnO2 thin films produced by sol–gel and chemical bath deposition for gas sensor applications. Surf Rev Lett 24(7):13. https://doi.org/10.1142/S0218625X17501049

    Article  Google Scholar 

  48. Al-Jawad SMH Salman ON, Yousif NA (2017) Influence of growth time on structural, optical and electrical properties of TiO2 nanorod arrays deposited by hydrothermal method. Surf Rev Lett 1850155 9pp. https://doi.org/10.1142/S0218625X1850155X.

  49. Ramamoorthy C, Rajendran V (2017) Synthesis and characterization of CuS nanostructures: Structural, optical, electrochemical and photocatalytic activity by the hydro/solvothermal process. Int J Hydrogen Energy 42(42):26454–26463

    Article  Google Scholar 

  50. Al-jawad SMH, Sabeeh SH, Taha AA Jassim HA (2018) Synthesis and characterization of Fe–ZnO thin films for antimicrobial activity Surf Rev Lett 1850197 13pp. https://doi.org/10.1142/S0218625X18501974

  51. Podili S, Geetha D, Ramesh PS (2018) Electrochemical studies on Ni doped CuS nanostructures with cationic surfactant synthesized through a hydrothermal route. J Mater Sci 29(13):11167–11177

    Google Scholar 

  52. Al-Jawad SMH (2017) Comparative study between CBD and SILAR methods for deposited TiO2, CdS, and TiO2/CdS core-shell structure. Mat Sci Semicon Proc 67:75–83

    Article  Google Scholar 

  53. Kundu J, Pradhan D (2013) Influence of precursor concentration, surfactant and temperature on the hydrothermal synthesis of CuS: structural, thermal and optical properties. New J Chem 37(5):1470–1478

    Article  Google Scholar 

  54. Umasankari S, Anitha R(2017) Synthesize and characterization of copper sulfide (CuS) nanoparticle using precipitation method IJATES 5(2):184–188

    Google Scholar 

  55. Ayodhya D, Veerabhadram G (2017) Preparation, characterization, photocatalytic, sensing and antimicrobial studies of calotropis gigantea leaf extract capped CuS NPs by a green approach. J Inorg Organomet Polymer Mater 27:215–230

    Article  Google Scholar 

  56. Ghaedi M, Nejad MY, Safarpoor M, Khafri HZ, Tyagi I, Agarwal S, Gupta VK (2016) Synthesis of CuS nanoparticles and evaluation of its antimicrobial properties in combination with Linum usitatissimum root and shoot extract. Desalination Water Treat 57(51):24456–24466

    Article  Google Scholar 

  57. Markovic Z,M, Harhaji-Trajkovic LM, Todorovic-Markovic BM, Kepić DP, Arsikin KM, Jovanović SP, Pantovic AC, Dramićanin MD, Trajkovic VS (2011) In vitro comparison of the photothermal anticancer activity of graphene nanoparticles and carbon nanotubes. Biomaterials 32:1121–1129

    Article  Google Scholar 

  58. Zhong W, Yu N, Zhang L, Liu Z, Wang Z, Hua J, Chen Z (2016) Synthesis of CuS nanoplate-containing PDMS film with excellent near-infrared shielding properties. RSC Adv 6:18881–18890

    Article  Google Scholar 

  59. Karvani ZE, Chehrazi P (2011) Antibacterial activity of ZnO nanoparticle on gram-positive and gram-negative bacteria. Afr J Microbiol Res 5(12):1368–1373

    Google Scholar 

  60. Malarkodi C, Rajeshkumar S (2017) Invitro bactericidal activity of bio-synthesized CuS nanoparticles against UTI causing pathogens. Inorg Nano-Met Chem 47(9):1290–1297

    Article  Google Scholar 

  61. Mofokeng TP, Moloto MJ, Shumbula PM, Nyamukamba P, Mubiayi PK, Takaidza S, Marais L(2018) Antimicrobial activity of amino acid-capped zinc and copper sulphide nanoparticles J Nanotechnol 2018:9. https://doi.org/10.1155/2018/4902675

    Google Scholar 

  62. Getie S, Belay A*, Reddy Ch. AR. Belay Z (2017) Synthesis and characterizations of zinc oxide nanoparticles for antibacterial applications. J Nanomedic Nanotechnol. https://doi.org/10.4172/2157-7439.S8-004

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Selma M. H. AL-Jawad.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

AL-Jawad, S.M.H., Taha, A.A. & Redha, A.M. Studying the structural, morphological, and optical properties of CuS:Ni nanostructure prepared by a hydrothermal method for biological activity. J Sol-Gel Sci Technol 91, 310–323 (2019). https://doi.org/10.1007/s10971-019-05023-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10971-019-05023-1

Keywords

Navigation