Abstract
This paper deals with the shear strengthening of Reinforced Concrete (RC) flexural members with externally bonded Fiber-Reinforced Polymers (FRPs). The interaction between an external FRP and an internal transverse steel reinforcement is not considered in actual code recommendations, but it strongly influences the efficiency of the shear strengthening rehabilitation technique and, as a consequence, the computation of interacting contributions to the nominal shear strength of beams. This circumstance is also discussed on the basis of the results of an experimental investigation of rectangular RC beams strengthened in shear with “U-jacketed” carbon FRP sheets. Based on experimental results of the present and other investigations, a new analytical model for describing the shear capacity of RC beams strengthened according to the most common schemes (side-bonded and “U-jacketed”), taking into account the interaction between steel and FRP shear strength contributions, is proposed.
Similar content being viewed by others
References
C. Pellegrino, D. Tinazzi, and C. Modena, “An experimental study on bond between concrete and FRP reinforcement,” ACSE J. Compos. Conctruct. (in press, scheduled for publication in the April 2008 issue).
C. Pellegrino and C. Modena, “Fiber-reinforced polymer shear strengthening of reinforced concrete beams with transverse steel reinforcement,” J. Compos. Construct., 6, No. 2, 104–111 (2002).
C. Pellegrino and C. Modena, “Fiber reinforced polymer shear strengthening of reinforced concrete beams: experimental study and analytical modeling,” ACI Struct. J., 103, No. 5, 720–728 (2006).
B. B. Adhikary, H. Mutsuyoshi, and M. Ashraf, “Effective shear strengthening of concrete beams using FRP sheets with bonded anchorage,” in: K. H. Tan (ed.), Fibre-Reinforced Polymer Reinforcement for Concrete Structures, Proc. of the 6th Intern. Symp. FRPRCS-6, Singapore, 8–10 July 2003, World Scientific Publishing Co. Pte. Ltd., Singapore (2003), pp. 457–466.
B. B. Adhikary and H. Mutsuyoshi, “Behaviour of concrete beams strengthened in shear with carbon-fiber sheets,” J. Compos. Construct., 8, No. 3, 258–264 (2004).
J. A. O. Barros and S. J. E. Dias, “Near-surface-mounted CFRP laminates for shear strengthening of concrete beams,” Cement Concr. Compos., 28, 276–292 (2006).
A. Bousselham and O. Chaallal O, “Behaviour of reinforced concrete T-beams strengthened in shear with carbon-fiber-reinforced polymer. An experimental study,” ACI Struct. J., 103, No. 3, 339–347 (2006).
A. Bousselham and O. Chaallal, “Effect of transverse steel and shear span on the performance of RC beams strengthened in shear with CFRP,” Composites, Pt. B, 37, 37–46 (2006).
A. Carolin and B. Taljsten, “Experimental study of strengthening for increased shear bearing capacity,” J. Compos. Construct., 9, No. 6, 488–496 (2005).
O. Chaallal, M.-J. Nollet, and D. Perraton, “Shear strengthening of RC beams by externally bonded side CFRP strips,” J. Compos. Construction, 2, No. 2, 111–113 (1998).
C. Deniaud and J. J. Cheng, “Reinforced concrete T-beams strengthened in shear with fiber-reinforced polymer sheets,” J. Compos. Construct., 7, No. 4, 302–310 (2003).
G. Donatone, A. Oliva, A. Sollazzo, and F. Trentadue, “Rinforzi strutturali con l’uso di compositi a matrice polimerica. Indagine sperimentale. Pt. I,” Giornale AICAP, No. 12, 3–8 (2003).
G. Donatone, A. Oliva, A. Sollazzo, and F. Trentadue, “Rinforzi strutturali con l’uso di compositi a matrice polimerica. Indagine sperimentale. Pt. II,” Giornale AICAP, No. 1, 4–7 (2004).
C. Modena, C. Pellegrino, and G. Golfetto, “Shear strengthening of concrete beams with FRP laminates,” in: Y. Ohama and M. Puterman (eds.), Adhesion Between Polymers and Concrete, Proc. of 2nd Intern. RILEM Symp. ISAP’ 99, RILEM Publ., Cachan (1999), pp. 375–386.
U. Ianniruberto and M. Imbimbo, “Role of fiber-reinforced plastic sheets in shear response of reinforced concrete beams. Experimental and analytical results,” J. Compos. Construct., 8, No. 5, 415–424 (2004).
A. Khalifa, G. Tumialan, A. Nanni, and A. Belarbi, “Shear strengthening of continuous reinforced concrete beams using externally bonded carbon-fiber-reinforced polymer sheets,” in: C. W. Dolan, S. H. Rizkalla and A. Nanni (eds.), Fourth Int. Symp. Fiber-Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Proc. of the 4th Int. Symp. FRPRCS-4, Baltimore, 31 October–5November 1999, American Concrete Institute, Farmington Hills, Mich. (1999), pp. 995–1008.
A. Khalifa, A. Belarbi, and A. Nanni, “Improving the shear capacity of existing RC T-section beams using CFRP composites,” Cement Concr. Compos., 22, 165–174 (2000).
A. Khalifa and A. Nanni, “Rehabilitation of rectangular simply supported RC beams with shear deficiencies using CFRP composites,” Construct. Build. Mater., 16, 135–146 (2002).
G. Monti and M. Liotta, “FRP-strengthening in shear: test and design equations,” Construct. Build. Mater., 21, 799–809 (2006).
L. Taerwe, H. Khalil, and S. Matthys, “Behaviour of RC beams strengthened in shear by external CFRP sheets,” in: Non-Metallic (FRP) Reinforcement for Concrete Structures, Proc. of the 3th Int. Symp. FRPRCS-3, Sapporo, 14–16 October 1997, Japan Concrete Institute, Tokio (1997), pp. 483–490.
B. Taljsten, “Strengthening concrete beams for shear with CFRP sheets,” Construct. Build. Mater., 17, 5–26 (2003).
T. C. Triantafillou, “Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites,” ACI Struct. J., 95, No. 2, 107–115 (1998).
Z. Zhang and C.-T. T. Hsu, “Shear strengthening of reinforced concrete beams using carbon FRP laminates,” J. Compos. Construct., 9, No. 2, 158–169 (2005).
FIB Task Group 9.3. Externally Bonded FRP Reinforcement for RC Structures (FIB bulletin 14), Federation Internationale du Beton, Lausanne (2001).
ACI Committee 440. Guide for the Design and Construction of Externally Bonded FRP System for Strengthening Concrete Structures (ACI 440.2R-02), American Concrete Institute, Farmington Hills (2002).
CNR-Italian Research Council, Italian Advisory Committee on Technical Recommendations for Construction. Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Existing Structures. Materials, RC and PC Structures, Masonry Structures (CNR-DT 200/2004), Rome (2004).
J. F. Chen and J. G. Teng, “Shear capacity of fiber-reinforced polymer-strengthened reinforced concrete beams. Fiber-reinforced polymer rupture,” J. Struct. Eng., 129, No. 5, 615–625 (2003).
T. C. Triantafillou and C. P. Antonopoulos, “Design of concrete flexural members strengthened in shear with FRP,” ASCE J. Compos. Construct., 4, No. 4, 198–205 (2000).
CEN, Eurocode 2: Design of Concrete Structures — Part 1-1: General Rules and Rules for Buildings (ENV 1992-1-1), Comite Europeen de Normalisation, Brussels (1991).
ACI Committee 318. Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (318R-05), American Concrete Institute, Farmington Hills (2005).
Italian Building Code. Norme Tecniche per il Calcolo, l’Esecuzione ed il Collaudo delle Strutture in Cemento Armato, Normale e Precompresso e per le Strutture Metalliche, 9/1/1996, Rome (1996).
Author information
Authors and Affiliations
Additional information
Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 339–356, May–June, 2008.
Rights and permissions
About this article
Cite this article
Pellegrino, C., Modena, C. An experimentally based analytical model for the shear capacity of FRP-strengthened reinforced concrete beams. Mech Compos Mater 44, 231–244 (2008). https://doi.org/10.1007/s11029-008-9016-y
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11029-008-9016-y