Abstract
Special features of formation of the connection zone in front of the front of molten pool and changes in the macro- and microstructure of the weld metal are considered for conditions of fusion welding of titanium alloys on an example of pseudo-α-titanium alloy VT20.Ways for forming macrotexture on the surface of joined preforms are determined with the aim of obtaining weld metal with structure and properties close to those of the base metal.
Similar content being viewed by others
REFERENCES
V. I. Murav'ev, “Special features of production and estimation of the quality of large-size thin-wall welded structures from alloy VT20,” Aviats. Prom., No. 8, 15–18 (1986).
V. V. Redchits, V. A. Frolov, V. A. Kazakov, and V. I. Lukin, Porosity in Welding of Nonferrous Metals [in Russian], “Machine-Building Technology” Publishing Center, Moscow (2002).
B. A. Matyushkin, A. I. Gorshkov, and V. I. Murav'ev, “Special features of formation and development of cracks and pores in the metal of welds of titanium alloys after the welding,” Svarochn. Proizv., No. 8, 9–11 (1975).
M. Kh. Shorshorov and V. N. Meshcheryakov, Phase Transformations and Variation of Properties of Titanium Alloys During Welding: An Atlas [in Russian], Nauka, Moscow (1973).
V. I. Murav'ev and A. A. Govorov, “Nitriding of titanium alloys,” Metalloved. Term. Obrab. Met., No. 6, 72–74 (1973).
P. S. Khan'zhin and L. M. Yablonik, “Effect of the control method on determination of defects by the capillary method,” Defektoskopiya, No. 6, 64–71 (1980).
V. I. Murav'ev and D. V. Matveenko, “Provision of bearing capacity of welded titanium structures,” Svarochn. Proizv., No. 9, 7–14 (2004).
V. I. Dobatkin, N. F. Anoshkin, A. L. Andreev, et al., Ingots of Titanium Alloys [in Russian], Metallurgiya, Moscow (1966).
G. E. Lozeev, “A method for lowering porosity in welded joints,” Svarochn. Proizv., No. 8, 31–33 (1975).
V. I. Murav'ev, R. A. Fizulavkov, A. F. Mel'nichuk, et al., “A study of the effect of gas laser cutting on formation of texture, structure, and chemical composition of the cut surface of titanium preforms,” Metalloved. Term. Obrab. Met., No. 2, 22–26 (2005).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 30 – 37, July, 2005.
Rights and permissions
About this article
Cite this article
Murav'ev, V.I. Problems of Pore Formation in Welded Joints of Titanium Alloys. Met Sci Heat Treat 47, 282–288 (2005). https://doi.org/10.1007/s11041-005-0068-5
Issue Date:
DOI: https://doi.org/10.1007/s11041-005-0068-5