Abstract
The effect of C, Si, Mn, V, Cu, Mo, and joint additives of Cr + Cu and Cu + Ni + Mo on the static and cyclic strength of iron in large castings is considered.
Similar content being viewed by others
References
I. N. Bogachev, The Metallography of Cast Iron [in Russian], Mashgiz, Moscow-Sverdlovsk (1962).
V. P. Melnikov, “Large iron castings with high static and cyclic strength,” Liteinoe Proizvod., No. 11, 25 (2003).
S. V. Davydov and V. P. Melnikov, “Effect of alloying on crystallization and properties of large iron castings,” Metallurg. Mashinostr., No. 4, 5–7 (2005).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 8, pp. 22–25, August, 2007.
Rights and permissions
About this article
Cite this article
Melnikov, V.P. Effect of chemical composition on the strength of large castings from gray iron. Met Sci Heat Treat 49, 394–397 (2007). https://doi.org/10.1007/s11041-007-0073-y
Issue Date:
DOI: https://doi.org/10.1007/s11041-007-0073-y