Thermo-Calc software is used to model the composition diagram for alloys based on γ-TiAl of the systems Ti – Al – Mo – (4 – 10) at.% Nb and Ti – Al – Nb – X (X is Cr, Mo, V). The effect of alloying on critical points and sequence of phase transformations is established. Changes in phase composition in relation to alloy TNM-B1 temperature are analyzed using a polythermal section of the Ti – Al – Nb – Mo system.
Similar content being viewed by others
Notes
Here and subsequently through the text element content is shown
in atomic fractions, expressed as a %.
References
D. M. Dimiduk, “Gamma titanium aluminides alloys — an assessment within the competition of aerospace structural materials,” Mater. Sci. and Eng., A263, 281 – 288 (1999)
F. Appel, J. D. H. Paul, and M. Oehring, Gamma Titanium Aluminide Alloys: Science and Technology, Wiley-VCH Verlag & Co. KGaA. (2011).
C. M. Austin, T. J. Kelly, K. G. McAllister, and J. C. Chesnutt, “Aircraft engine applications for gamma titanium aluminide,” in: Structural Intermetallics, TMS, Warrendale, PA (1997).
F. Preli and J. Eβlinger, “Materials for next generation commercial aircraft engines,” in: 4th International Workshop on Titanium Aluminides, Nuremberg, Germany (2011).
S. Isobe and T. Noda, “Automotive application of TiAl intermetallics,” in: Structural Intermetallics, TMS, Warrendale, PA (1997).
T. Tetsui, “Manufacturing technology for gamma-tial alloy in current and future application,” Rare Metals, 30, 29 – 299 (2011).
D. Hu, X.Wu, and M. H. Loretto, “Advances in optimization of mechanical properties in cast TiAl alloys,” Intermetallics, 13, 914 – 919 (2005).
H. Clemens and S. Mayer, “Design, processing, microstructure, properties and applications of advanced intermetallic TiAl alloys,” Adv. Eng. Mater., 15(4), 191 – 215 (2013).
V. M. Imayev, G. A. Salishchev, M. R. Shagiev, et al., “Low-temperature superplasticity of submicrocrystalline Ti – 48Al – 2Nb – 2Cr alloy produced by multiple forging,” Scr. Mater., 40(2), 183 – 190 (1998).
V. M. Imayev, R. M. Imayev, G. A. Salishchev, et al., “Effect of strain rate on twinning and room temperature ductility of TiAl with fine equiaxed microstructure,” Scr. Mater., 36(8), 891 – 897 (1997).
R. Kainuma, Y. Fujita, H. Mitsui, et al., “Phase equilibria among α (hcp), β (bcc) and γ (L10) phases in Ti – Al base ternary alloys,” Intermetallics, 8, 855 – 867 (2000).
D. Hu, “Effect of composition on grain refinement in TiAl-based alloys,” Intermetallics, 9, 1037 – 1043 (2001).
Y. J. Wang, J. N. Wang, J. Yang, and Y. Wang, “Microstructure refinement of cast TiAl alloys by β solidification,” Scr. Mater., 51, 113 – 117 (2004).
V. Imayev, T. Oleneva, R. Imayev, et al., “Microstructure and mechanical properties of low and heavy alloyed γ-TiAl +α2-Ti3 Al based alloys subjected to different treatments,” Intermetallics, 26, 91 – 97 (2012).
J. O. Andersson, T. Helander, and T. Hoglund, “THERMOCALC & DICTRA. Computational tools for materials science,” CALPHAD, 26(2), 273 – 312 (2002).
N. A. Belov and M. E. Samoshina, “Influence of the thermal treatment temperature on the microstructure and phase composition of casts of β-solidifying TNM alloy based on the Ti – Al – Nb – Mo System,” Russ. J. Non-Ferr. Met., 55(1), 37 – 45 (2014).
N. A. Belov and I. S. Chupakhin, “Quantitative analysis of the phase composition of TNM-B1 alloy based on titanium aluminide TiAl(γ),” Metalloved. Term. Obrab. Met., No. 9, 32 – 37 (2013).
H. F. Chladil, H. Clemens, G. A. Zickler, et al., “Experimental studies and thermodynamic simulation of phase transformations in high Nb containing γ-TiAl based alloys,” Int. J. Mater. Res., 98, 1131 – 1137 (2007).
H. Clemens,W.Wallgram, S. Kremmer, et al., “Design of novel β-solidifying TiAl alloys with adjustable β/B2 phase fraction and excellent hot-workability,” Adv. Eng. Mater., 10, 707 – 713 (2008).
H. F. Chladil, H. Clemens, H. Leitner, et al., “Phase transformations in high niobium and carbon containing TiAl based alloys,” Intermetallics, 14, 1194 – 1198 (2006).
V. Güther, C. Rothe, S. Winter, and H. Clemens, “Metallurgy, microstructure and properties of intermetallic TiAl ingots,” BHM, 155(7), 325 – 329 (2010).
J. C. Schuster and M. Palm, “Reassessment of the binary aluminum-titanium phase diagram,” J. Phase Equilib. Diffusion, 27(3), 255 – 277 (2006).
X. Wu, “Review of alloy and process development of TiAl alloys,” Intermetallics, 14, 1114 – 1122 (2006).
G. L. Chen,W. J. Zhang, Z. C. Liu, and S. J. Li, “Microstructure and properties of high-Nb containing TiAl-base alloys,” in: Gamma Titanium Aluminides, TMS, Warrendale, PA (1995).
T. Schmoelzer, K.-D. Liss, G. Zickler, et al., “Phase fractions. transition and ordering temperatures in TiAl – Nb – Mo alloys: An in- and ex-situ study,” Intermetallics, 18, 1544 – 1552 (2010).
R. Werner, M. Schloffer, E. Schwaighofer, et al., “Thermodynamic calculations of phase equilibria and phase fractions of a β-solidifying TiAl alloy using the CALPHAD approach,” Mater. Res. Soc. Symp. Proc., 1516, 59 – 64 (2012).
H. Clemens, B. Boeck, W. Wallgram, et al., “Experimental studies and thermodynamic simulations of phase transformations in Ti – (41 – 45)Al – 4Nb – lMo – 0.1B alloys,” Mater. Res. Soc., 115 – 120 (2009).
A. V. Kartavykh, V. V. Tcherdyntsev, A. A. Stepashkin, et al., “High-temperature dilatometry of Ti – 46Al – 8Nb refractory alloy,” Russ. Metall. (Metally), 2013(7), 528 – 534 (2013).
The work was carried out within the scope of grant RFFI No. 13-08-12249 “Features of structure and phase state formation in alloys based on gamma titanium aluminide with deformation heat treatment and surface modification and its effect on physicomechanical and operating properties.”
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 14 – 23, May, 2016.
Rights and permissions
About this article
Cite this article
Kuznetsov, A.V., Sokolovskii, V.S., Salishchev, G.A. et al. Thermodynamic Modeling and Experimental Study of Phase Transformations in Alloys Based on γ-TiAl. Met Sci Heat Treat 58, 259–267 (2016). https://doi.org/10.1007/s11041-016-9999-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-016-9999-2