Abstract
Ceria-based materials are used in industrial applications such as catalyst supports, carbon monoxide reduction catalysts, and solid oxide fuel cell electrolytes. Various applications require different morphological particles. The ceria particles with various morphologies from the precursors of cerium(III) acetate hydrate, cerium(IV) nitrate hydrate, and cerium(IV) ammonium nitrate were prepared by spray pyrolysis (SP) because SP has the potential for simple and continuous process. The precursor behaviors and the particle morphologies were characterized by thermogravimetric analysis and by transmission electron microscopy. Four main morphologies of solid spherical, hollow spherical with a single pore, hollow concave, and hollow spherical with multiple pores were observed. The experimental results suggest that the morphological formation mechanism is highly correlated with the factors of precursor solubilities, solvent evaporation rates (droplet diameters), and precursor melting temperatures. In addition, total concentrations of cerium(III) in the ceria particles from various precursors were examined using X-ray photoelectron spectroscopy.
Similar content being viewed by others
References
Audebrand N, Guillou N, Auffrédic JP, Louër D (1996) The thermal behaviour of ceric ammonium nitrate studied by temperature-dependent X-ray powder diffraction. Thermochim Acta 286:83–87
Blumenth RN, Brugner FS, Garnier JE (1973) Electrical conductivity of CaO-doped nonstoichiometric cerium dioxide from 700 °C to 1500 °C. J Electrochem Soc 120:1230–1237
Bruce LA, Hoang M, Hughes AE, Turner TW (1996) Surface area control during the synthesis and reduction of high area ceria catalyst supports. Appl Catal A 134:351–362
Burroughs P, Hamnett A, Orchard AF, Thornton G (1976) Satellite structure in the X-ray photoelectron spectra of some binary and mixed oxides of lanthanum and cerium. J Chem Soc Dalton Trans 17:1686–1698
Cao CY, Cui ZM, Chen CQ, Song WG, Cai W (2010) Ceria hollow nanospheres produced by a template-free microwave-assisted hydrothermal method for heavy metal ion removal and catalysis. J Phys Chem C 114:9865–9870
Chen CY, Tseng TK, Tsay CY, Lin CK (2008) Formation of irregular nanocrystalline CeO2 particles from acetate-based precursor via spray pyrolysis. J Mater Eng Perform 17:20–24
Chen GZ, Zhu FF, Sun X, Sun SX, Chen RP (2011) Benign synthesis of ceria hollow nanocrystals by a template-free method. CrystEngComm 13:2904–2908
El Fallah J, Hilaire L, Roméo M, Le Normand F (1995) Effect of surface treatments, photon and electron impacts on the ceria 3d core level. J Electron Spectrosc Relat Phenom 73:89–103
Hennings U, Reimert R (2007) Investigation of the structure and the redox behavior of gadolinium doped ceria to select a suitable composition for use as catalyst support in the steam reforming of natural gas. Appl Catal A 325:41–49
Kilbourn BT (1993) Part 1, A–L. In: A lanthanide lantology. Mountain Pass: Molycorp Inc, p 4
Masui T, Fujiwara K, Machida K, Adachi G, Sakata T, Mori H (1997) Characterization of cerium(IV) oxide ultrafine particles prepared using reversed micelles. Chem Mater 9:2197–2204
Messing GL, Zhang SC, Jayanthi GV (1993) Ceramic powder synthesis by spray-pyrolysis. J Am Ceram Soc 76:2707–2726
Minh NQ (1993) Ceramic fuel-cells. J Am Ceram Soc 76:563–588
Papastergiades E, Argyropoulos S, Rigakis N, Kiratzis NE (2009) Fabrication of ceramic electrolytic films by the method of solution aerosol thermolysis (SAT) for solid oxide fuel cells (SOFC). Ionics 15:545–554
Phonthammachai N, Rumruangwong M, Gulari E, Jamieson AM, Jitkarnka S, Wongkasemjit S (2004) Synthesis and rheological properties of mesoporous nanocrystalline CeO2 via sol-gel process. Colloid Surf A 247:61–68
Quill LL, Robey RF (1937) The rare earth metals and their compounds. III. The ternary systems cerium group nitrates-nitric acid-water at 25 and 50°. J Am Chem Soc 59:2591–2595
Seidell A (1919) Solubilities of inorganic and organic substances. D. Van Nostrand Company, New York
Shih SJ, Chang LYS, Chen CY, Borisenko KB, Cockayne DJH (2009a) Nanoscale yttrium distribution in yttrium-doped ceria powder. J Nanopart Res 11:2145–2152
Shih SJ, Li G, Cockayne DJH, Borisenko KB (2009b) Mechanism of dopant distribution: an example of nickel-doped ceria nanoparticles. Scripta Mater 61:832–835
Shih SJ, Borisenko KB, Liu LJ, Chen CY (2010) Multiporous ceria nanoparticles prepared by spray pyrolysis. J Nanopart Res 12:1553–1559
Shih SJ, Herrero PR, Li G, Chen CY, Lozano-Perez S (2011a) Three-dimensional structures of mesoporous ceria particles using electron tomography. Microsc Microanal 17:54–60
Shih SJ, Wu YY, Borisenko KB (2011b) Control of morphology and dopant distribution in yttrium-doped ceria nanoparticles. J Nanopart Res 13:7021–7028
Vidal H, Kaspar J, Pijolat M, Colon G, Bernal S, Cordon A et al (2000) Redox behavior of CeO2-ZrO2 mixed oxides I. Influence of redox treatments on high surface area catalysts. Appl Catal B 27:49–63
Wang AQ, Punchaipetch P, Wallace RM, Golden TD (2003) X-ray photoelectron spectroscopy study of electrodeposited nanostructured CeO2 films. J Vac Sci 21:1169–1175
Zhang SC, Messing GL, Borden M (1990) Synthesis of solid, spherical zirconia particles by spray pyrolysis. J Am Ceram Soc 73:61–67
Acknowledgments
This study was funded by the National Science Council of Taiwan (Grant No. NSC 99-2218-E-011-030-MY2) and by the National Taiwan University of Science and Technology (Grant No. 100H451201).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shih, SJ., Wu, YY., Chen, CY. et al. Morphology and formation mechanism of ceria nanoparticles by spray pyrolysis. J Nanopart Res 14, 879 (2012). https://doi.org/10.1007/s11051-012-0879-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11051-012-0879-4