Abstract
We present a general formulation of a class of uniaxial phenomenological models, able to accurately simulate hysteretic phenomena in rate-independent mechanical systems and materials, which requires only one history variable and leads to the solution of a scalar equation for the evaluation of the generalized force. Two specific instances of the class, denominated Bilinear and Exponential Models, are developed as an example to illustrate the peculiar features of the formulation. The Bilinear Model, that is one of the simplest hysteretic models which can be emanated from the proposed class, is first described to clarify the physical meaning of the quantities adopted in the formulation. Specifically, the potentiality of the proposed class is witnessed by the Exponential Model, able to simulate more complex hysteretic behaviors of rate-independent mechanical systems and materials exhibiting either kinematic hardening or softening. The accuracy and the computational efficiency of this last model are assessed by carrying out nonlinear time history analyses, for a single degree of freedom mechanical system having a rate-independent kinematic hardening behavior, subjected either to a harmonic or to a random force. The relevant results are compared with those obtained by exploiting the widely used Bouc–Wen Model.
Similar content being viewed by others
References
Asano, K., Iwan, W.: An alternative approach to the random response of bilinear hysteretic systems. Earthq. Eng. Struct. Dyn. 12(2), 229–236 (1984)
Baber, T., Noori, M.: Random vibration of degrading, pinching systems. J. Eng. Mech. ASCE 111(8), 1010–1026 (1985)
Baber, T., Wen, Y.: Random vibration of hysteretic, degrading systems. J. Eng. Mech. ASCE 107, 1069–1087 (1981)
Bahn, B., Hsu, C.: Stress–strain behaviour of concrete under cyclic loading. ACI Mater. J. 95(2), 178–193 (1998)
Bathe, K.: Finite Element Procedures. Prentice Hall, Englewood Cliffs (1996)
Bertotti, G.: Hysteresis in Magnetism: For Physicists, Materials Scientists, and Engineers. Academic Press, San Diego (1998)
Besseling, J.: A theory of elastic, plastic, and creep deformations of an initially isotropic material showing anisotropic strain-hardening, creep recovery, and secondary creep. J. Appl. Mech. ASME 25, 529–536 (1958)
Bouc, R.: Modele mathematique d’hysteresis. Acustica 24, 16–25 (1971)
Carboni, B., Lacarbonara, W.: Nonlinear dynamic characterization of a new hysteretic device: experiments and computations. Nonlinear Dyn. 83(1), 23–39 (2016)
Carboni, B., Mancini, C., Lacarbonara, W.: Hysteretic beam model for steel wire ropes hysteresis identification. In: Structural Nonlinear Dynamics and Diagnosis, pp. 261–282, (2015)
Caughey, T.: Random excitation of a system with bilinear hysteresis. J. Appl. Mech. ASME 27(4), 649–652 (1960)
Charalampakis, A., Koumousis, V.: Identification of Bouc–Wen hysteretic systems by a hybrid evolutionary algorithm. J. Sound Vib. 314(3), 571–585 (2008)
Coey, J.: Magnetism and Magnetic Materials. Cambridge University Press, Cambridge (2010)
Dafalias, Y., Popov, E.: A model of nonlinearly hardening materials for complex loading. Acta Mech. 21(3), 173–192 (1975)
Dafalias, Y., Popov, E.: Cyclic loading for materials with a vanishing elastic region. Nucl. Eng. Des. 41(2), 293–302 (1977)
Dimian, M., Andrei, P.: Noise-Driven Phenomena in Hysteretic Systems. Springer, New York (2014)
Dominguez, A., Sedaghati, R., Stiharu, I.: Modeling and application of mr dampers in semi-adaptive structures. Comput. Struct. 86(3), 407–415 (2008)
Duhem, P.: Die dauernden aenderungen und die thermodynamik. i. Zeitschrift für Physikalische Chemie 22(1), 545–589 (1897)
Elnashai, A., Izzuddin, B.: Modelling of material non-linearities in steel structures subjected to transient dynamic loading. Earthq. Eng. Struct. Dyn. 22(6), 509–532 (1993)
Fedele, R., Sessa, S., Valoroso, N.: Image correlation-based identification of fracture parameters for structural adhesives. Technische Mechanik 32(2), 195–204 (2012)
Formica, G., Lacarbonara, W.: Three-dimensional modeling of interfacial stick-slip in carbon nanotube nanocomposites. Int. J. Plast. 88, 204–217 (2017)
Ghobarah, A., Korol, R., Osman, A.: Cyclic behavior of extended end-plate joints. J. Struct. Eng. ASCE 118(5), 1333–1353 (1992)
Giuffrè, A., Pinto, P.: Il comportamento del cemento armato per sollecitazioni cicliche di forte intensità. Giornale del Genio Civile 5, 391–408 (1970)
Greco, F., Raimondo, L., Serino, G., Vaiana, N.: A mixed explicit-implicit time integration approach for nonlinear analysis of base-isolated structures. Ann. Solid Struct. Mech (2017). DOI: 10.1007/s12356-017-0051-z.
Gunston, T., Rebelle, J., Griffin, M.: A comparison of two methods of simulating seat suspension dynamic performance. J. Sound Vib. 278(1), 117–134 (2004)
Hauser, H.: Energetic model of ferromagnetic hysteresis. J. Appl. Phys. 75(5), 2584–2597 (1994)
Hodgdon, M.: Mathematical theory and calculations of magnetic hysteresis curves. IEEE Trans. Mag. 24(6), 3120–3122 (1988)
Ikhouane, F., Hurtado, J., Rodellar, J.: Variation of the hysteresis loop with the bouc-wen model parameters. Nonlinear Dyn. 48(4), 361–380 (2007)
Iwan, W.: On a class of models for the yielding behavior of continuous and composite systems. J. Appl. Mech. ASME 34(3), 612–617 (1967)
Jiao, Y., Kishiki, S., Yamada, S., Ene, D., Konishi, Y., Hoashi, Y., Terashima, M.: Low cyclic fatigue and hysteretic behavior of u-shaped steel dampers for seismically isolated buildings under dynamic cyclic loadings. Earthq. Eng. Struct. Dyn. 44(10), 1523–1538 (2015)
Jiles, D., Atherton, D.: Ferromagnetic hysteresis. IEEE Trans. Mag. 19(5), 2183–2185 (1983)
Jiles, D., Atherton, D.: Theory of ferromagnetic hysteresis. J. Appl. Phys. 55(6), 2115–2120 (1984)
Kang, D., Jung, S., Nho, G., Ok, J., Yoo, W.: Application of bouc-wen model to frequency-dependent nonlinear hysteretic friction damper. J. Mech. Sci. Techn. 24(6), 1311–1317 (2010)
Krieg, R.: A practical two surface plasticity theory. J. Appl. Mech. ASME 42(3), 641–646 (1975)
Lacarbonara, W., Vestroni, F.: Nonclassical responses of oscillators with hysteresis. Nonlinear Dyn. 32(3), 235–258 (2003)
Laxalde, D., Thouverez, F., Sinou, J.: Dynamics of a linear oscillator connected to a small strongly non-linear hysteretic absorber. Int. J. Non-Linear Mech. 41(8), 969–978 (2006)
Lourenço, P., Ramos, L.: Characterization of cyclic behavior of dry masonry joints. J. Struct. Eng. ASCE 130(5), 779–786 (2004)
Lubliner, J.: Plasticity Theory. Macmillan, New York (1990)
Majzoobi, G., Kashfi, M., Bonora, N., Iannitti, G., Ruggiero, A., Khademi, E.: Damage characterization of aluminum 2024 thin sheet for different stress triaxialities. Arch. Civ. Mech. Eng. 18(3), 702–712 (2018)
Manzoori, A., Toopchi-Nezhad, H.: Application of an extended bouc-wen model in seismic response prediction of unbonded fiber-reinforced isolators. J. Earthq. Eng. 21(1), 87–104 (2017)
Mayergoyz, I.: Mathematical Models of Hysteresis. Springer, New York (1991)
Menegotto, M., Pinto, P.: Method of analysis for cyclically loaded r.c. plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending. In: Proceedings of IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Lisbon, Portugal (1973)
Nelson, R., Dorfmann, A.: Parallel elastoplastic models of inelastic material behavior. J. Eng. Mech. ASCE 121(10), 1089–1097 (1995)
Ok, J., Yoo, W., Sohn, J.: New nonlinear bushing model for general excitations using bouc–wen hysteretic model. Int. J. Autom. Technol. 9(2), 183–190 (2008)
Özdemir, H.: Nonlinear transient dynamic analysis of yielding structures. Ph.D. Thesis, University of California, Berkeley, CA, USA (1976)
Pacitti, A., Peigney, M., Bourquin, F., Lacarbonara, W.: Experimental data based cable tension identification via nonlinear static inverse problem. Proc. Eng. 199, 453–458 (2017)
Piersol, A., Paez, T.: Harris’ Shock and Vibration Handbook, 6th edn. McGraw-Hill, New York (2010)
Quarteroni, A., Sacco, R., Saleri, F.: Numerical Mathematics. Springer, New York (2000)
Ramberg, W., Osgood, W.: Description of stress-strain curves by three parameters. Technical Notes 902, National Advisory Committee on Aeronautics (1943)
Rosenbrock, H.: Some general implicit processes for the numerical solution of differential equations. Comput. J. 4, 329–330 (1963)
Ru, C., Chen, L., Shao, B., Rong, W., Sun, L.: A hysteresis compensation method of piezoelectric actuator: model, identification and control. Control Eng. Pract. 17(9), 1107–1114 (2009)
Seo, J., Choi, I., Lee, J.: Static and cyclic behavior of wooden frames with tenon joints under lateral load. J. Struct. Eng. ASCE 125(3), 344–349 (1999)
Simo, J., Hughes, T.: Computational Inelasticity. Springer, New York (1998)
Spizzuoco, M., Calabrese, A., Serino, G.: Innovative low-cost recycled rubber-fiber reinforced isolator: experimental tests and finite element analyses. Eng. Struct. 76, 99–111 (2014)
Subramaniam, P., Banerjee, S.: A correction to damping ratio for hyperbolic–hysteretic model for clayey soil. Int. J. Geotech. Eng. 7(2), 124–129 (2013)
Thomas, G., Weir, M., Hass, J., Giordano, F.: Thomas’ Calculus, 11th edn. Addison Wesley Longman, London (2004)
Tsai, C., Chiang, T., Chen, B., Lin, S.: An advanced analytical model for high damping rubber bearings. Earthq. Eng. Struct. Dyn. 32(9), 1373–1387 (2003)
Vaiana, N.: Matlab codes for non-linear time history analysis of dynamic systems supported by wire rope isolators. Master Thesis, 2nd level Master in Emerging Technologies for Construction, University of Naples Federico II, Naples, Italy (2015)
Vaiana, N.: Mathematical models and numerical methods for the simulation of the earthquake response of seismically base-isolated structures. Ph.D. Thesis, University of Naples Federico II, Naples, Italy (2017)
Vaiana, N., Serino, G.: Simulation of dynamic behavior of seismic isolators using a parallel elasto-plastic model. WASET. Int. J. Civ. Environ. Eng. 11(2), 178–184 (2017)
Vaiana, N., Spizzuoco, M., Serino, G.: Wire rope isolators for seismically base-isolated lightweight structures: experimental characterization and mathematical modeling. Eng. Struct. 140, 498–514 (2017)
Valoroso, N., Sessa, S., Lepore, M., Cricrí, G.: Identification of mode-i cohesive parameters for bonded interfaces based on DCB test. Eng. Fract. Mech. 104, 56–79 (2013)
Valoroso, N., Marmo, F., Sessa, S.: A novel shell element for nonlinear pushover analysis of reinforced concrete shear walls. Bull. Earthq. Eng. 13(8), 2367–2388 (2015)
Visintin, A.: On hysteresis in elasto-plasticity and in ferromagnetism. Int. J. Non-Linear Mech. 37(8), 1283–1298 (2002)
Wen, Y.: Method for random vibration of hysteretic systems. J. Eng. Mech. Divis. ASCE 102(2), 249–263 (1976)
Wen, Y.: Equivalent linearization for hysteretic systems under random excitation. J. Appl. Mech. ASME 47(1), 150–154 (1980)
Wittke, H., Olfe, J., Rie, K.: Description of stress–strain hysteresis loops with a simple approach. Int. J. Fat. 19(2), 141–149 (1997)
Zaiming, L., Katukura, H.: Markovian hysteretic characteristics of structures. J. Eng. Mech. ASCE 116(8), 1798–1811 (1990)
Zhang, H., Foliente, G., Yang, Y., Ma, F.: Parameter identification of inelastic structures under dynamic loads. Earthq. Eng. Struct. Dyn. 31(5), 1113–1130 (2002)
Zona, A., Dall’Asta, A.: Elastoplastic model for steel buckling-restrained braces. J. Constr. Steel Res. 68(1), 118–125 (2012)
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Vaiana, N., Sessa, S., Marmo, F. et al. A class of uniaxial phenomenological models for simulating hysteretic phenomena in rate-independent mechanical systems and materials. Nonlinear Dyn 93, 1647–1669 (2018). https://doi.org/10.1007/s11071-018-4282-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11071-018-4282-2