Abstract
Accurate and efficient monitoring of electrical machine (EM) operating parameters, including temperature, mechanical vibration, torque and rotating speed and others that can indicate the EM health conditions is becoming ever more important in the world of electrical drives. The traditional methodology of one sensor per parameter can be theoretically replaced by a “one sensor measures all” technology, which can be achieved through the use of fibre-optic sensors (FOS). In this paper, several FOSs, which use different optical sensing principles for multiple physical parameter measurements of EMs, are reviewed. This paper also provides an insight into the major developments, and discusses the engineering challenges of FOS used for EM monitoring over the last few decades, and compares the advanced features of FOS with those of conventional sensors in use. Finally, a novel FOS-EM observer system scheme employing the Fibre Bragg Grating technique for multi-parameter monitoring of EM health is proposed, after discussion of the preceding industrial and academic FOS cases for EM applications.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Ágoston, K.: Vibration detection of the electrical motors using strain gauges. Procedia Technol. (2016). https://doi.org/10.1016/j.protcy.2016.01.037
Arregui, F.J., et al.: Unbalance and harmonics detection in induction motors using an optical fiber sensor. IEEE Sens. J. 6(3), 605–612 (2006). https://doi.org/10.1109/JSEN.2006.874441
Barczak, K., et al.: Optical fibre magnetic field sensors for monitoring of the state of work of electric motors. Acta Phys. Pol. A 116(3), 250–253 (2009). https://doi.org/10.12693/APhysPolA.116.250
Barnish, T.J., Muller, M.R., Kasten, D.J.: Motor maintenance: a survey of techniques and results. In: Saratoga Springs, NY (US), pp. 287–297 (1997)
Basumallick, N., et al.: Fiber Bragg grating accelerometer with enhanced sensitivity. Sens. Actuators A Phys. 173(1), 108–115 (2012). https://doi.org/10.1016/j.sna.2011.10.026
Bazurto, A.J., Quispe, E.C., Mendoza, R.C.: Causes and failures classification of industrial electric motor. In: Proceedings of the 2016 IEEE Andescon, Andescon 2016 (2017). https://doi.org/10.1109/ANDESCON.2016.7836190.
Beihoff, B.: Survey of torque transduction methodologies for industrial applications. In: IEEE Conference Record of Annual Pulp and Paper Industry Technical Conference, pp. 220–229 (1996). https://doi.org/10.1109/papcon.1996.536001
Berkoff, T.A., Kersey, A.D.: Experimental demonstration of a fiber bragg grating accelerometer. IEEE Photonics Technol. Lett. 8(12), 1677–1679 (1996). https://doi.org/10.1109/68.544716
Binu, S., Mahadevan Pillai, V.P., Chandrasekaran, N.: Fibre optic displacement sensor for the measurement of amplitude and frequency of vibration. Opt. Laser Technol. 39(8), 1537–1543 (2007). https://doi.org/10.1016/j.optlastec.2006.12.008
Blake, J.N., Rose, A.H.: Fiber-optic current transducer optimized for power metering applications. In: Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, vol. 1, pp. 405–408 (2003). https://doi.org/10.1109/tdc.2003.1335257
Boiarski, A.A., et al.: Temperature measurements in power plant equipment using distributed fiber optic sensing. IEEE Trans. Power Deliv. 10(4), 1771–1778 (1995). https://doi.org/10.1109/61.473381
Brinner, T.R., McCoy, R.H., Kopecky, T.: Induction versus permanent-magnet motors for electric submersible pump field and laboratory comparisons. IEEE Trans. Ind. Appl. 50(1), 174–181 (2014). https://doi.org/10.1109/TIA.2013.2288203
Budinski, V., Donlagic, D.: Fiber-optic sensors for measurements of torsion, twist and rotation: a review. Sensors (Switzerland) 17(3), 1–29 (2017). https://doi.org/10.3390/s17030443
Burns, W.K.: Optical Fiber Rotation Sensing, Optical Fiber Rotation Sensing. Academic Press, Cambridge (1994). https://doi.org/10.1016/c2009-0-22412-3
Burt, C.M., et al.: Electric motor efficiency under variable frequencies and loads. J. Irrig. Drain. Eng. 134(2), 129–136 (2008). https://doi.org/10.1061/(ASCE)0733-9437(2008)134:2(129)
Chang, H.Y., et al.: Rotational speed sensors based on a fiber Bragg grating. In: 2017 Opto-Electronics and Communications Conference, OECC 2017 and Photonics Global Conference, PGC 2017, 2017-Novem, pp. 1–3 (2017). https://doi.org/10.1109/OECC.2017.8114863
Chen, Y., et al.: Lubricant film thickness measurement using fiber-optic Michelson Interferometer and fiber-optic displacement sensor. In: 2009 IEEE International Conference on Information and Automation, ICIA 2009, pp. 951–956 (2009). https://doi.org/10.1109/ICINFA.2009.5205055
Chen, W., et al.: A passive eddy current damper for vibration suppression of a force sensor. J. Phys. D Appl. Phys. (2013). https://doi.org/10.1088/0022-3727/46/7/075001
Conforti, G., et al.: Fiber optic vibration sensor for remote monitoring in high power electric machines. Appl. Opt. 28(23), 5158 (1989). https://doi.org/10.1364/ao.28.005158
Corres, J.M., et al.: Vibration monitoring in electrical engines using an in-line fiber etalon. Sens. Actuators A 132(2), 506–515 (2006). https://doi.org/10.1016/j.sna.2006.02.026
Cui, K., et al.: ‘FPGA-based interrogation controller with optimized pipeline architecture for very large-scale fiber-optic interferometric sensor arrays. Opt. Lasers Eng. 121, 389–396 (2019). https://doi.org/10.1016/j.optlaseng.2019.04.026
Culshaw, B.: The optical fibre Sagnac interferometer: an overview of its principles and applications. Meas. Sci. Technol. (2006). https://doi.org/10.1088/0957-0233/17/1/R01
Cusano, A., et al.: Dynamic strain measurements by fibre Bragg grating sensor. Sens. Actuators A 110(1–3), 276–281 (2004). https://doi.org/10.1016/j.sna.2003.10.031
Dakin, J.P., et al.: Distributed optical fibre Raman temperature sensor using a semiconductor light source and detector. Electron. Lett. 21(13), 569–570 (1985). https://doi.org/10.1049/el:19850402
de Almeida, A.T., et al.: Policy options to promote energy efficient electric motors and drives in the EU. Renew. Sustain. Energy Rev. 74(January), 1275–1286 (2017). https://doi.org/10.1016/j.rser.2017.01.112
De Morais Sousa, K., et al.: Determination of temperature dynamics and mechanical and stator losses relationships in a three-phase induction motor using fiber Bragg grating sensors. IEEE Sens. J. 12(10), 3054–3061 (2012). https://doi.org/10.1109/JSEN.2012.2210203
De Morais Sousa, K., et al.: ‘Validation of thermal and electrical model for induction motors using fiber Bragg gratings. Meas. J. Int. Meas. Confed. 46(6), 1781–1790 (2013). https://doi.org/10.1016/j.measurement.2013.02.008
de Morais Sousa, K., et al.: Fiber Bragg grating temperature sensors in a 6.5-MW generator exciter bridge and the development and simulation of its thermal model. Sensors (Switzerland) 14(9), 16651–16663 (2014). https://doi.org/10.3390/s140916651
Dreyer, U.J., et al.: Quasi-distributed optical fiber transducer for simultaneous temperature and vibration sensing in high-power generators. IEEE Sens. J. 18(4), 1547–1554 (2018). https://doi.org/10.1109/JSEN.2017.2787681
Duncan, R.G., Childers, B.A., Rajendran, V.: High-spatial-resolution temperature monitoring of an industrial motor using a distributed fiber optic sensing technique. Smart Struct. Mater. 2004 Smart Sens. Technol. Meas. Syst. 5384, 258 (2004). https://doi.org/10.1117/12.540130
Eickhoff, W., Ulrich, R.: Optical frequency domain reflectometry in single-mode fiber. Appl. Phys. Lett. 39(9), 693–695 (1981). https://doi.org/10.1063/1.92872
Emadi, A., Berthold, F.: Advanced Electric Drive Vehicles. CRC Press, Boca Raton (2017)
EMSA: Life Cycle Cost Analyses (2019). https://www.motorsystems.org/task-b/life-cycle-cost. Accessed 29 July 2019
Fabian, M., et al.: Comprehensive monitoring of electrical machine parameters using an integrated fiber Bragg grating-based sensor system. J. Lightw. Technol. 36(4), 1046–1051 (2018). https://doi.org/10.1109/JLT.2017.2771143
FIBRECORE.Ltd: Pure Silica Core SM Fiber Product specification (2018). https://www.fibercore.com/product/pure-silica-core-sm-fiber
Finley, W.R., Hodowanec, M.M., Holter, W.G.: An analytical approach to solving. In: IEEE PCIC, (Paper No PCIC-99-20), pp. 217–232 (1999)
Finley, W., Loutfi, M., Sauer, B.J.: Motor vibration problems understanding and identifying. In: IEEE Cement Industry Technical Conference (Paper), pp. 1–20 (2013). https://doi.org/10.1109/CITCON.2013.6525282
FOA TM-Series Fiber Optic Accelerometers User’s Manual (2015). www.vibrosystm.com. Accessed 4 Nov 2019
Fusiek, G., Niewczas, P., McDonald, J.R.: Feasibility study of the application of optical voltage and current sensors and an arrayed waveguide grating for aero-electrical systems. Sens. Actuators A 147(1), 177–182 (2008). https://doi.org/10.1016/j.sna.2008.05.006
Galea, M., Giangrande, P., Madonna, V.: Reliability-oriented design of electrical machines: the design process for machines. Insulation Systems MUST Evolve. IEEE, pp. 20–28 (2020)
Galeti, J.H., Kitano, C., Connelly, M.J.: Improved synthetic-heterodyne Michelson interferometer vibrometer using phase and gain control feedback. Appl. Opt. 54(35), 10418 (2015). https://doi.org/10.1364/ao.54.010418
Gangopadhyay, T.K.: Prospects for Fibre Bragg gratings and Fabry-Perot interferometers in fibre-optic vibration sensing. Sens. Actuators A 113(1), 20–38 (2004). https://doi.org/10.1016/j.sna.2004.01.043
Gao, Z., et al.: A sensorless rotor temperature estimator for induction machines based on current harmonic spectral estimation scheme. In: EPE-PEMC 2006: 12th International Power Electronics and Motion Control Conference, Proceedings, vol. 55(1), pp. 431–437 (2007). https://doi.org/10.1109/EPEPEMC.2006.283200
García, I., et al.: Optical fiber sensors for aircraft structural health monitoring. Sensors (Switzerland) 15(7), 15494–15519 (2015). https://doi.org/10.3390/s150715494
Gerada, D., et al.: High-speed electrical machines: technologies, trends, and developments. IEEE Trans. Ind. Electron. 61(6), 2946–2959 (2014). https://doi.org/10.1109/TIE.2013.2286777
Ghatak, K. T. A. (2007) Optical fiber sensors 14.1. In: Fiber optic essentials, 1st edn. Wiley, pp. 221–235. https://doi.org/10.1002/9780470152560
Giurgiutiu, V.: Chapter 7—fiber-optic sensors, structural health monitoring of aerospace composites (2016). https://doi.org/10.1016/B978-0-12-409605-9.00007-6.
Habel, J., et al.: Femtosecond FBG written through the coating for sensing applications. Sensors (Switzerland) 17(11), 1–11 (2017). https://doi.org/10.3390/s17112519
Haramoni, N., et al.: Hybrid wavelength-time-domain interrogation system for multiplexed fiber Bragg sensors using a strain-tuned erbium-doped fiber laser. IEEE Sens. J. 8(7), 1061–1066 (2008). https://doi.org/10.1109/JSEN.2008.926175
Hashish, B.E., et al.: Vibration diagnostic challenges (2017)
He, H., et al.: Multiple vibrations measurement using phase-sensitive OTDR merged with Mach-Zehnder interferometer based on frequency division multiplexing. Opt. Express 24(5), 4842 (2016). https://doi.org/10.1364/oe.24.004842
He, F., Xie, G., Luo, J.: Electrical bearing failures in electric vehicles. Friction 8(1), 4–28 (2020). https://doi.org/10.1007/s40544-019-0356-5
Hu, D., et al.: Synchronous interrogation of multiple FBG sensors using multi-wavelength parallel swept light source. In: Liu, T., Jiang, S. (eds.) Advanced Sensor Systems and Applications VIII, p. 44. SPIE, Bellingham (2018). https://doi.org/10.1117/12.2327121
Huang, J., et al.: ‘Real-time measurement of temperature field in heavy-duty machine tools using fiber Bragg grating sensors and analysis of thermal shift errors. Mechatronics 31, 16–21 (2015). https://doi.org/10.1016/j.mechatronics.2015.04.004
Hubner, L., et al.: Monitoring of winding overhang vibrations on large synchronous motors. In: 11th Petroleum and Chemical Industry Conference Europe Electrical and Instrumentation Applications, PCIC (2014). https://doi.org/10.1109/PCICEurope.2014.6900061
Hudon, C., et al.: ‘Determination of stator temperature profile using distributed sensing’, 2013 IEEE Electrical Insulation Conference. EIC 2013(June), 191–195 (2013). https://doi.org/10.1109/EIC.2013.6554231
Hudon, C., et al.: Rotor temperature monitoring using fiber Bragg gratings. In: 2016 IEEE Electrical Insulation Conference (EIC). IEEE, pp. 456–459 (2016a). https://doi.org/10.1109/EIC.2016.7548636
Hudon, C., et al.: Rotor temperature monitoring using fiber Bragg gratings. In: 34th Electrical Insulation Conference, EIC 2016. IEEE, (June), pp. 456–459 (2016b). https://doi.org/10.1109/EIC.2016.7548636
Hughes, A., Drury, B.: Electric Motors and Drives: Fundamentals, Types and Applications. Newnes, Oxford (2013)
IEC: IEC 60034:2019 SER (2019). https://webstore.iec.ch/publication/62415#additionalinfo. Accessed 4 Nov 2019
IEC: IEC 60085 Electrical insulation-Thermal evaluation and designation Isolation (2007). http://webstore.iec.ch. Accessed 4 Nov 2019
IEEE Industry Applications Society: IEEE Standard 841 (2009)
Jankowski, T.A., et al.: Development and validation of a thermal model for electric induction motors. IEEE Trans. Ind. Electron. 57(12), 4043–4054 (2010). https://doi.org/10.1109/TIE.2010.2043044
Javied, T., et al.: A study on electric energy consumption of manufacturing companies in the German industry with the focus on electric drives. Procedia CIRP 41, 318–322 (2016)
Jia, P.G., et al.: An active temperature compensated fiber-optic fabry-perot accelerometer system for simultaneous measurement of vibration and temperature. IEEE Sens. J. 13(6), 2334–2340 (2013). https://doi.org/10.1109/JSEN.2013.2251879
Kafafi, Z.H., et al.: The role of photonics in energy. J. Photonics Energy (2015). https://doi.org/10.1117/1.JPE.5.050997
Kersey, A.D.: Distributed and multiplexed fiber optic sensors. In: Fiber Optic Sensors: An Introduction for Engineers and Scientists: Second Edition, pp. 277–314 (2011). https://doi.org/10.1002/9781118014103.ch11
Kirkendall, C.K., Dandridge, A.: Overview of high performance fibre-optic sensing. J. Phys. D Appl. Phys. (2004). https://doi.org/10.1088/0022-3727/37/18/R01
Kruger, L., et al.: Non-contact torsion sensor using fibre Bragg gratings. Meas. Sci. Technol. 15(8), 1448–1452 (2004). https://doi.org/10.1088/0957-0233/15/8/002
Leal-Junior, A., et al.: Material features based compensation technique for the temperature effects in a polymer diaphragm-based FBG pressure sensor. Opt. Express 26(16), 20590 (2018). https://doi.org/10.1364/oe.26.020590
Lee, J.M., Hwang, Y.: A novel online rotor condition monitoring system using fiber Bragg grating (FBG) sensors and a rotary optical coupler. Meas. Sci. Technol. (2008). https://doi.org/10.1088/0957-0233/19/6/065303
Lefèvre, H.C.: The fiber-optic gyroscope, a century after Sagnac’s experiment: the ultimate rotation-sensing technology? C R Phys. 15(10), 851–858 (2014). https://doi.org/10.1016/j.crhy.2014.10.007
Leite, R.C., et al.: Analysis of thermo-mechanical stress in fiber Bragg grating used for hydro-generator rotor temperature monitoring. J. Microw. Optoelectron. Electromagn. Appl. 16(2), 445–459 (2017). https://doi.org/10.1590/2179-10742017v16i2818
Li, X., Kan, E.C.: A wireless low-range pressure sensor based on P(VDF-TrFE) piezoelectric resonance. Sens. Actuators A Phys. 163(2), 457–463 (2010). https://doi.org/10.1016/j.sna.2010.08.022
Li, T., et al.: Fiber Bragg grating sensing-based online torque detection on coupled bending and torsional vibration of rotating shaft. IEEE Sens. J. 17(7), 1199–2007 (2017). https://doi.org/10.1109/JSEN.2017.2669528
Linessio, R.P., et al.: Induction motors vibration monitoring using a biaxial optical fiber accelerometer. IEEE Sens. J. 16(22), 8075–8082 (2016). https://doi.org/10.1109/JSEN.2016.2604850
Liu, L., et al.: Temperature-independent FBG pressure sensor with high sensitivity. Opt. Fiber Technol. 13(1), 78–80 (2007). https://doi.org/10.1016/j.yofte.2006.09.001
Liu, Y., Jiang, H., Yuan, L.: Multi-ring compound fiber optic rotation measuring approach based on the Rayleigh backscattering. In: Proceedings of 2012 International Conference on Measurement, Information and Control, MIC 2012. IEEE, 1(Mic), pp. 107–112 (2012). https://doi.org/10.1109/MIC.2012.6273310.
Lopez-Higuera, J.M., et al.: New low-cost fiber optic accelerometer system for stator winding monitoring of hydroelectric generating machines. In: Proceedings of SPIE—The International Society for Optical Engineering, pp. 510–515 (1996). https://doi.org/10.1117/12.248675
López-Higuera, J.M., Morante, M.A., Cobo, A.: Simple low-frequency optical fiber accelerometer with large rotating machine monitoring applications. J. Lightw. Technol. 15(7), 1120–1129 (1997). https://doi.org/10.1109/50.596957
Lopez-Perez, D., Antonino-Daviu, J.: Application of infrared thermography to failure detection in industrial induction motors: case stories. IEEE Trans. Ind. Appl. 53(3), 1901–1908 (2017). https://doi.org/10.1109/TIA.2017.2655008
Lu, Y., et al.: Distributed vibration sensor based on coherent detection of phase-OTDR. J. Lightw. Technol. 28(22), 3243–3249 (2010). https://doi.org/10.1109/JLT.2010.2078798
Machine Design: Basics of rotary encoders: overview and new technologies | Sensors content from Machine Design (2014). https://www.machinedesign.com/sensors/basics-rotary-encoders-overview-and-new-technologies-0. Accessed 22 Oct 2019
Madonna, V., et al.: Thermal overload and insulation aging of short duty cycle, aerospace motors. IEEE Trans. Ind. Electron. 67(4), 2618–2629 (2020). https://doi.org/10.1109/TIE.2019.2914630
Mahmoud, S.S., Koziol, B., Jusak, J.: 5G optical sensing technologies. In: Optical and Wireless Convergence for 5G Networks (2019). Wiley, pp. 179–195. https://doi.org/10.1002/9781119491590.ch9
Marignetti, F., et al.: Fiber Bragg grating sensor for electric field measurement in the end windings of high-voltage electric machines. IEEE Trans. Ind. Electron. 63(5), 2796–2802 (2016). https://doi.org/10.1109/TIE.2016.2516500
Melecio, J. I., Mohammed, A., Djurovic, S.: Characterisation of FBG based magnetic field sensor response sensitivity to excitation orientation for rotating electric machine applications. In: 2019 8th Mediterranean Conference on Embedded Computing, MECO 2019 - Proceedings, (June), pp. 10–14 (2019). https://doi.org/10.1109/MECO.2019.8760181
Meyer, J., et al.: Fiber optical sensors for enhanced battery safety. In: Pickrell, G., Udd, E., Du, H.H. (eds.) International Society for Optics and Photonics, p. 94800Z (2015). https://doi.org/10.1117/12.2183325
Mihailovic, P., et al.: Development of a portable fiber-optic current sensor for power systems monitoring. IEEE Trans. Instrum. Meas. 53(1), 24–30 (2004). https://doi.org/10.1109/TIM.2003.821500
Mohammed, A., Djurović, S.: Stator winding internal thermal monitoring and analysis using in situ FBG sensing technology. IEEE Trans. Energy Convers. 33(3), 1508–1518 (2018). https://doi.org/10.1109/TEC.2018.2826229
Mohammed, A., Djurović, S.: A study of distributed embedded thermal monitoring in electric coils based on FBG sensor multiplexing. Microprocess. Microsyst. 62, 102–109 (2018). https://doi.org/10.1016/j.micpro.2018.07.006
Mohammed, A., Djurović, S.: Feasibility study of embedded FBG thermal sensing use for monitoring electrical fault-induced thermal excitation in random wound coils. J. Eng. 17, 4147–4151 (2019). https://doi.org/10.1049/joe.2018.8108
Mohammed, A., et al.: FBG sensing for hot spot thermal monitoring in electric machinery random wound components. In: Proceedings—2016 22nd International Conference on Electrical Machines, ICEM 2016, pp. 2266–2272 (2016). https://doi.org/10.1109/ICELMACH.2016.7732837
Mohammed, A., Melecio, J.I., Durovic, S.: Electrical machine permanent magnets health monitoring and diagnosis using an air-gap magnetic sensor. IEEE Sens. J. 20(10), 5251–5259 (2020). https://doi.org/10.1109/JSEN.2020.2969362
Morikawa, S.R.K., et al.: ‘Triaxial Bragg grating accelerometer’, 2002 15th Optical Fiber Sensors Conference Technical Digest. OFS 2002, 95–98 (2002). https://doi.org/10.1109/OFS.2002.1000510
Mott, R.L., Untener, J.A.: Applied strength of materials, 6th edn. CRC Press, ISBN 9781498716758 (2017)
Munteanu, G., Binder, A., Schneider, T.: Loss measurement of a 40 kW high-speed bearingless PM synchronous motor. In: IEEE Energy Conversion Congress and Exposition: Energy Conversion Innovation for a Clean Energy Future, ECCE 2011, Proceedings (6), pp. 722–729 (2011). https://doi.org/10.1109/ECCE.2011.6063841
Murray, A., Hare, B., Hirao, A.: Resolver position sensing system with integrated fault detection for automotive applications. Proc. IEEE Sens. 1(2), 864–869 (2002). https://doi.org/10.1109/icsens.2002.1037221
NEMA: NEMA MG 1–2016 Motors and Generators (2018)
Newmaster, J.T., et al.: Remote fiber optic sensors for angular orientation. Fiber Optic Laser Sens. V 0838, 28 (2012). https://doi.org/10.1117/12.942486
Park, C.S., et al.: A PDMS-coated optical fiber Bragg grating sensor for enhancing temperature sensitivity. J. Opt. Soc. Korea 15(4), 329–334 (2011). https://doi.org/10.3807/JOSK.2011.15.4.329
Patel, A., Ferdowsi, M.: Current sensing for automotive electronics—a survey. IEEE Trans. Veh. Technol. 58(8), 4108–4119 (2009). https://doi.org/10.1109/TVT.2009.2022081
Perrone, G., Vallan, A.: A low-cost optical sensor for noncontact vibration measurements. IEEE Trans. Instrum. Meas. 58(5), 1650–1656 (2009)
Pyrhonen, J., Hrabovcova, V., Semken, R.S.: Electrical Machine Drives Control: An Introduction. Wiley, Hoboken (2016)
Rajendran, V.P., et al.: Use of fiber optic-based distributed temperature measurement system for electrical machines. Opt. Diagn. Fluids Solids Combust. II 5191, 214 (2004). https://doi.org/10.1117/12.504249
Riley, C.M., et al.: Stator current harmonics and their causal vibrations: a preliminary investigation of sensorless vibration monitoring applications. IEEE Trans. Ind. Appl. 35(1), 94–99 (1999). https://doi.org/10.1109/28.740850
Rivera, H.L., García-Souto, J.A., Sanz, J.: Measurements of mechanical vibrations at magnetic cores of power transformers with fiber-optic interferometric intrinsic sensor. IEEE J. Sel. Top. Quantum Electron. 6(5), 788–797 (2000). https://doi.org/10.1109/2944.892619
Rogers, A.J.: Polarization-optical time domain reflectometry: a technique for the measurement of field distributions. Appl. Opt. 20(6), 1060 (1981). https://doi.org/10.1364/ao.20.001060
Rosolem, J.B., Floridia, C., Sanz, J.P.M.: Field and laboratory demonstration of a fiber-optic/RF partial discharges monitoring system for hydrogenerators applications. IEEE Trans. Energy Convers. 25(3), 884–890 (2010). https://doi.org/10.1109/TEC.2010.2044507
Saidur, R.: A review on electrical motors energy use and energy savings. Renew. Sustain. Energy Rev. 14(3), 877–898 (2010). https://doi.org/10.1016/j.rser.2009.10.018
Sasic, M., Jiang, H., Stone, G.C.: Requirements for fiber optic sensors for stator endwinding vibration monitoring. In: Proceedings of 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, (September), pp. 118–121 (2012). https://doi.org/10.1109/CMD.2012.6416365
Shang, K., et al.: Polyimide-coated fibre Bragg grating (FBG) sensors for thermal mapping of electric machine windings. In: 22nd International Conference on Transparent Optical Networks (ICTON 2020). IEEE, pp. 4–7 (2020).
Shyu, L.H., et al.: ‘A signal interpolation method for Fabry-Perot interferometer utilized in mechanical vibration measurement. Meas. J. Int. Meas. Confed. 92, 83–88 (2016). https://doi.org/10.1016/j.measurement.2016.05.072
Sousa, K.D.M., et al.: Thermal and vibration dynamic analysis of an induction motor using optical fiber Bragg gratings. In: 24th International Conference on Optical Fibre Sensors, vol. 9634(September 2015), p. 963443 (2015). https://doi.org/10.1117/12.2195034
Sousa, K.M., et al.: Dynamic eccentricity induced in induction motor detected by optical fiber Bragg grating strain sensors. IEEE Sens. J. 16(12), 4786–4792 (2016). https://doi.org/10.1109/JSEN.2016.2554885
Sunar, M., Al-Bedoor, B.O.: Vibration measurement of rotating blades using a root embedded PZT sensor. Shock Vib. 15(5), 517–541 (2008). https://doi.org/10.1155/2008/494639
Tavner, P.J.: Review of condition monitoring of rotating electrical machines. Electric power applications. IET Electr. Power Appl. 2(4), 215–247 (2008). https://doi.org/10.1049/iet-epa
TECHNICA.Ltd: T20/Polyimide Coated FBG sensor Datasheet (2018)
The Association of Electrical Equipment and Medical Imaging Manufacturers – NEMA: Ansi/Nema Mg 1–2016’, p. 775 (2016). doi: Document ID: 100228
Toliyat, H.A., Kliman, G.B.: Handbook of Electric Motors. CRC Press, Boca Raton (2018)
Tshiloz, K., et al.: Real-time insulation lifetime monitoring for motor windings. In: Proceedings—2016 22nd International Conference on Electrical Machines, ICEM 2016, pp. 2335–2340 (2016). https://doi.org/10.1109/ICELMACH.2016.7732847
Udd, E.: Fiber Optic Sensors Based on the sagnac interferometer and passive ring resonator. In: Fiber Optic Sensors: An Introduction for Engineers and Scientists, pp. 199–230 (2011a)
Udd, E.: The emergence of fiber optic sensor technology. In: Fiber Optic Sensors: An Introduction for Engineers and Scientists. Wiley, Hoboken, NJ, USA, p. 512 (2011b). https://doi.org/10.1002/9781118014103.ch1
Udd, E., Spillman, W.B.: Fiber optic sensors. An Introduction for Engineers and Scientists, Fiber optics sensors (2011)
Ukil, A., Braendle, H., Krippner, P.: Distributed temperature sensing: review of technology and applications. IEEE Sens. J. 12(5), 885–892 (2012). https://doi.org/10.1109/JSEN.2011.2162060
Uttam, D., Culshaw, B.: Precision time domain reflectometry in optical fiber systems using a frequency modulated continuous wave ranging technique. J. Lightw. Technol. 3(5), 971–977 (1985). https://doi.org/10.1109/JLT.1985.1074315
Vali, V., Shorthill, R.W.: Fiber ring interferometer. Appl. Opt. 15(5), 1099 (1976). https://doi.org/10.1364/ao.15.001099
Vehicles, M., Pacific, A., America, L.: Electric motors : market research report electric motors: market research report (2019)
Wang, P., et al.: Quasi-distributed temperature measurement for stator bars in large generator via use of Fiber Bragg Gratings. In: Proceedings of the 6th International Forum on Strategic Technology, IFOST 2011, vol. 2, pp. 810–813 (2011). https://doi.org/10.1109/IFOST.2011.6021144
Wang, C., Lu, Q., Cheng, L.: Novel type of temperature self-compensating acceleration transducer based on ofbg. IEEE Sens. J. 13(8), 3012–3013 (2013). https://doi.org/10.1109/JSEN.2013.2253604
Wang, Y., et al.: A two fiber Bragg gratings sensing system to monitor the torque of rotating shaft. Sensors (Switzerland) 16(1), 1–8 (2016). https://doi.org/10.3390/s16010138
Wang, Y., et al.: Partial discharge ultrasound detection using the Sagnac interferometer system. Sensors (Switzerland) 18(5), 1–18 (2018). https://doi.org/10.3390/s18051425
Wei, L., et al.: Fiber bragg grating based rotating speed measurement system. In: 2011 International Conference on Electric Information and Control Engineering, ICEICE 2011—Proceedings. IEEE, pp. 1387–1390 (2011). https://doi.org/10.1109/ICEICE.2011.5777520
Xu, D., et al.: A review of sensorless control methods for AC motor drives. Trans. Electr. Mach. Syst. 2(1), 104–115 (2019). https://doi.org/10.23919/TEMS.2018.8326456
Yang, H.Z., et al.: A review of recent developed and applications of plastic fiber optic displacement sensors. Meas. J. Int. Meas. Confederation 48(1), 333–345 (2014). https://doi.org/10.1016/j.measurement.2013.11.007
Yang, Y., Bilgin, B., et al.: Thermal management of electric machines. IET Electr. Syst. Transp. 7(2), 104–116 (2017a). https://doi.org/10.1049/iet-est.2015.0050
Yang, Y., Castano, S.M., et al.: Design and comparison of interior permanent magnet motor topologies for traction applications. IEEE Trans. Transp. Electrif. 3(1), 86–97 (2017b). https://doi.org/10.1109/TTE.2016.2614972
Zhang, X., Wu, X., Diao, W.: An approach for the dynamic compensation of the batch balance in the process control. In: Proceedings - 2004 International Conference on Intelligent Mechatronics and Automation, (August), pp. 789–792 (2004). https://doi.org/10.1109/icima.2004.1384305
Zheng, P., Pan, S., Li Y.: The research on the network optical fiber sensor of the surface temperature measurement for a large rotor based on IEEE1451.2. In: 2005 International Conference on Electrical Machines and Systems. IEEE, vol. 3, pp. 2434–2436 (2005). https://doi.org/10.1109/ICEMS.2005.203010
Acknowledgements
This work was supported by the Ningbo 3315 Innovation Team Scheme under Grant 2018A-08-C. This work was also supported by the National Natural Science Foundation of China (NSFC) through Project 51850410515.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors have no conflict of interest to declare that are relevant to the content of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Shang, K., Zhang, Y., Galea, M. et al. Fibre optic sensors for the monitoring of rotating electric machines: a review. Opt Quant Electron 53, 75 (2021). https://doi.org/10.1007/s11082-020-02712-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11082-020-02712-y