Abstract
Reusing the industrial waste materials is one of the main aims of sustainability and achieve the environmental protection. However, concrete is the main production for recycling waste materials and cleaning the climate. The utilization of self-consolidating lightweight concrete (SCLC) can achieve two important advantages of the structure self-weight reduction and improving workability. This paper examined the effect of waste expanded polystyrene (EPS) beads on the workability and hardened characteristics of sustainable SCLCs. Six different EPS volume fractions up to 80% replaced with normal coarse aggregate to produce SCLC mixtures with water to binder (w/b) ratio of 0.35. A total binder content of 500 kg/m3 by including 20% waste ceramic powder with 80% Portland cement and fine aggregate consist of river sand and fine ceramic with 1:1 ratio in all SCLC mixes. The workability of SCLCs was examined by slump flow time and diameter, L-box height ratio, V-funnel flow time, and segregation resistance. Moreover, the hardened properties tested at different curing periods such as compressive strength at 7, 28, and 90 days; flexural strength at 28 and 90 days; and splitting tensile strength, dry density, voids percent, water absorption, ultrasonic pulse velocity (UPV); and scanning electron microscope (SEM) at 28 days. The results verified that workability of SCLCs enhanced as EPS incorporation increased and achieved the limitations required for self-compacting concrete (SCC) while the strengths value curtailed but the compressive strength satisfied the lower value indicated by ACI for structural purposes. Depending on the water absorption and UPV, results illustrated that all produced sustainable SCLC mixtures had a good durability. Furthermore, a high linear correlation was noticed between the results.
Similar content being viewed by others
Availability of data and materials
Not applicable.
References
Abd SM, Dhamya G, Hattem M, Khalil D (2016) Effective replacement of fine aggregates by expanded polystyrene beads in concrete. Int J Eng Res Sci Technol 5:45–53
Abd-ElAziz MA, Faried AS, Kamel MMA (2017) Influence of silica fume incorporation on the fresh, thermal and mechanical properties of expanded polystyrene (EPS) foamed concrete. Am J Civ Eng 5(3):188–195
ACI 213 (2003) Guide for structural lightweight-aggregate concrete (213R-03). American Concrete Institute, Farmington Hills
ACI 318 (2008) Building Code Requirements for Structural Concrete and Commentary (318R-08). American Concrete Institute, Farmington Hills
Agwa IS, Omar OM, Tayeh BA, Abdelsalam BA (2020) Effects of using rice straw and cotton stalk ashes on the properties of lightweight self-compacting concrete. Constr Build Mater 235:117541
Al-Hadithi AI, Hilal NN (2016) The possibility of enhancing some properties of self-compacting concrete by adding waste plastic fibers. J Build Eng 8:20–28. https://doi.org/10.1016/j.jobe.2016.06.011
Ali TKM, Hilal N, Faraj RH, Al-Hadithi AI (2020) Properties of eco-friendly pervious concrete containing polystyrene aggregates reinforced with waste PET fibers. Innov Infrastruct Solutions 5(3):1–16. https://doi.org/10.1007/s41062-020-00323-w
Almeshal I, Tayeh BA, Alyousef R, Alabduljabbar H, Mohamed AM, Alaskar A (2020a) Use of recycled plastic as fine aggregate in cementitious composites: A review. Constr Build Mater 253:119146
Almeshal I, Tayeh BA, Alyousef R, Alabduljabbar H, Mohamed AM (2020b) Eco-friendly concrete containing recycled plastic as partial replacement for sand. J Mater Res Technol 9(3):4631–4643
Aly ST, El-Dieb AS, Taha MR (2019) Effect of high-volume ceramic waste powder as partial cement replacement on fresh and compressive strength of self-compacting concrete. J Mater Civ Eng 31(2):04018374. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002588
Amin M, Tayeh BA, Agwa IS (2020) Effect of using mineral admixtures and ceramic wastes as coarse aggregates on properties of ultrahigh-performance concrete. J Clean Prod 273:123073
Andiç-Çakır Ö, Yoğurtcu E, Yazıcı Ş, Ramyar K (2009) Self-compacting lightweight aggregate concrete: design and experimental study. Mag Concr Res 61(7):519–527. https://doi.org/10.1680/macr.2008.00024
Assaad JJ, Abdulkader EM (2020) Durability of polymer-modified lightweight flowable concrete made using expanded polystyrene. Constr Build Mater 249:118764
ASTM C78 – 17 (2017) Standard test method for flexural strength of concrete (using simple beam with third-point loading). West Conshohocken, ASTM International, West Conshohocken, PA. https://www.astm.org
ASTM C39M – 20 (2020) Standard test method for compressive strength of cylindrical concrete specimens. ASTM International, West Conshohocken. https://doi.org/10.1520/c0039_c0039m-20
ASTM C494F – 19 (2019) Standard specification for chemical admixtures for concrete. ASTM International, West Conshohocken. https://doi.org/10.1520/c0494_c0494m-19
ASTM C496/C496M-17 (2017) Standard test method for splitting tensile strength of cylindrical concrete specimens. ASTM International, West Conshohocken https://doi.org/10.1520/c0496_c0496m-17
ASTM C597 – 16 (2016) Standard test method for pulse velocity through concrete. ASTM International, West Conshohocken https://doi.org/10.1520/c0597-16
ASTM C642–13 (2013) Standard test method for density, absorption, and voids in hardened concrete. ASTM International, West Conshohocken https://doi.org/10.1520/c0642-13
Babu D, Saradhi K, Babu G, Wee TH (2005) Properties of lightweight expanded polystyrene aggregate concretes containing fly ash. Cem Concr Res 35(6):1218–1223. https://doi.org/10.1016/j.cemconres.2004.11.015
Babu DS, Babu KG, Tiong-Huan W (2006) Effect of polystyrene aggregate size on strength and moisture migration characteristics of lightweight concrete. Cem Concr Compos 28(6):520–527
Bogas JA, Gomes A, Pereira MFC (2012) Self-compacting lightweight concrete produced with expanded clay aggregate. Constr Build Mater 35:1013–1022. https://doi.org/10.1016/j.conbuildmat.2012.04.111
Bogas J, Alexandre MGG, Gomes A (2013) Compressive strength evaluation of structural lightweight concrete by non-destructive ultrasonic pulse velocity method. Ultrasonics 53(5):962–972. https://doi.org/10.1016/j.ultras.2012.12.012
Bouvard D, Chaix J-M, Dendievel R, Fazekas A, Létang JM, Peix G, Quenard D (2007) Characterization and simulation of microstructure and properties of EPS lightweight concrete. Cem Concr Res 37(12):1666–1673. https://doi.org/10.1016/j.cemconres.2007.08.028
Brooks AL, Zhou H, Hanna D (2018) Comparative study of the mechanical and thermal properties of lightweight cementitious composites. Constr Build Mater 159:316–328. https://doi.org/10.1016/j.conbuildmat.2017.10.102
Chen B, Liu N (2013) A novel lightweight concrete-fabrication and its thermal and mechanical properties. Constr Build Mater 44:691–698. https://doi.org/10.1016/j.conbuildmat.2013.03.091
Chi JM, Huang R, Yang CC, Chang JJ (2003) Effect of aggregate properties on the strength and stiffness of lightweight concrete. Cem Concr Compos 25(2):197–205. https://doi.org/10.1016/S0958-9465(02)00020-3
Cook DJ (1983) Expanded polystyrene concrete. Concr Technol Des New Concr Mater 1:41–69
Dixit A, Pang SD, Kang S-H, Moon J (2019) Lightweight structural cement composites with expanded polystyrene (EPS) for enhanced thermal insulation. Cem Concr Compos 102:185–197. https://doi.org/10.1016/j.cemconcomp.2019.04.023
EFNARC (European Federation of Specialist Construction Chemicals and Concrete Systems) (2005) The European guidelines for self-compacting concrete: specification, production and use. http://www.efnarc.org/pdf/SCCGuidelinesMay2005.pdf
Ferrándiz-Mas V, Thomas B, García-Alcocel E, Cheeseman CR (2014) Lightweight mortars containing expanded polystyrene and paper sludge ash. Constr Build Mater 61:285–292. https://doi.org/10.1016/j.conbuildmat.2014.03.028
Herki BA, Khatib JM (2017) Valorisation of waste expanded polystyrene in concrete using a novel recycling technique. Eur J Environ Civ Eng 21(11):1384–1402. https://doi.org/10.1080/19648189.2016.1170729
Hilal N, Saleh RD, Yakoob NB, Banyhussan QS (2020) Utilization of ceramic waste powder in cement mortar exposed to elevated temperature. Innov Infrastruct Solutions 6(1):1–12. https://doi.org/10.1007/s41062-020-00403-x
Ibrahim M, Ahmad A, Barry MS, Alhems LM, Suhoothi ACM (2020) Durability of structural lightweight concrete containing expanded perlite aggregate. Int J Concr Struct Mater 14(1):1–15. https://doi.org/10.1186/s40069-020-00425-w
Jones MR, McCarthy A (2005) Preliminary views on the potential of foamed concrete as a structural material. Mag Concr Res 57(1):21–31
Khatib JM, Herki BA, Elkordi A (2019) Characteristics of concrete containing EPS. Use Recycled Plast Eco-efficient Concr:137–165. https://doi.org/10.1016/B978-0-08-102676-2.00007-4
Khayat KH, Bickley J, Lessard M (2000) Performance of self-consolidating concrete for casting basement and foundation walls. Mater J 97(3):374–380
Kluge RW, Sparks MM, Tuma EC (1949) Lightweight aggregate concrete. J Proc 45(5):625–642
Laoubi H, Djoudi A, Dheilly RM, Bederina M, Goullieux A, Quéneudéc M (2019) Durability of a lightweight construction material made with dune sand and expanded polystyrene. J Adhes Sci Technol 33(19):2157–2179. https://doi.org/10.1080/01694243.2019.1637091
Leslie JR, Cheesman WJ (1949) An ultrasonic method of studying deterioration and cracking in concrete structures. J Am Concr Inst 21(1):17–36
Lo TY, Tang WC, Cui HZ (2007) The effects of aggregate properties on lightweight concrete. Build Environ 42(8):3025–3029. https://doi.org/10.1016/j.buildenv.2005.06.031
Lopez V, Llamas B, Juan A, Moran JM, Guerra I (2007) Eco-efficient concretes: impact of the use of white ceramic powder on the mechanical properties of concrete. Biosyst Eng 96(4):559–564. https://doi.org/10.1016/j.biosystemseng.2007.01.004
Lotfy A, Hossain KMA, Lachemi M (2016) Transport and durability properties of self-consolidating concrete using three types of lightweight aggregates. ACI Mater J 113(5):679
Madandoust R, Ranjbar MM, Mousavi SY (2011) An investigation on the fresh properties of self-compacted lightweight concrete containing expanded polystyrene. Constr Build Mater 25(9):3721–3731. https://doi.org/10.1016/j.conbuildmat.2011.04.018
Mandavi HK, Srivastava V, Agarwal VC (2015) Durability of concrete with ceramic waste as fine aggregate replacement. Int J Eng Tech Res 3(2015):196–199
Medher AH, Al-Hadithi AI, Hilal N (2020) The possibility of producing self-compacting lightweight concrete by using expanded polystyrene beads as coarse aggregate. Arab J Sci Eng:1–18. https://doi.org/10.1007/s13369-020-04886-9
Medina C, De Rojas MIS, Thomas C, Polanco JA, Frías M (2016) Durability of recycled concrete made with recycled ceramic sanitary ware aggregate. Inter-indicator relationships. Constr Build Mater 105:480–486. https://doi.org/10.1016/j.conbuildmat.2015.12.176
Mermerdaş K, Süleyman İPEK, Sor NH, Mulapeer ES, Ekmen Ş (2020) The impact of artificial lightweight aggregate on the engineering features of geopolymer mortar. Türk Doğa ve Fen Dergisi 9(1):79–90. https://doi.org/10.46810/tdfd.718895
Miled K, Sab K, Le Roy R (2007) Particle size effect on EPS lightweight concrete compressive strength: experimental investigation and modelling. Mech Mater 39(3):222–240
Mo KH, Johnson Alengaram U, Jumaat MZ (2016) Bond properties of lightweight concrete–a review. Constr Build Mater 112:478–496. https://doi.org/10.1016/j.conbuildmat.2016.02.125
Mohammad H, Hossein NHASL, Tahir MM, Alyousef R, Samadi M (2019) Performance evaluation of green mortar comprising ceramic waste as cement and fine aggregates replacement. SN Appl Sci 1(6):557. https://doi.org/10.1007/s42452-019-0566-5
Mustafa, MA-T, Hanafi I, Mahmoud R, Tayeh BA (2019) Effect of partial replacement of sand by plastic waste on impact resistance of concrete: experiment and simulation. In Structures 20:519-526 Elsevier
Narayanan N, Ramamurthy K (2000) Structure and properties of aerated concrete: a review. Cem Concr Compos 22(5):321–329
Ovbeniyekede OS, Adenan DSQA, Ahmad M, Kamaruddin K (2018) Water absorption and compressive strength of self compacting concrete incorporating fly ash and quarry dust. Int J Sci Res Publ 8(10):377–384
Öz HÖ, Gesoglu M, Güneyisi E, Sor NH (2017) Self-consolidating concretes made with cold-bonded fly ash lightweight aggregates. ACI Mater J 114(3). https://doi.org/10.14359/51689606
Pavlík Z, Trník A, Kulovaná T, Scheinherrová L, Rahhal V, Irassar E, Černý R (2016) DSC and TG analysis of a blended binder based on waste ceramic powder and portland cement. Int J Thermophys 37(3):32. https://doi.org/10.1007/s10765-016-2043-3
Pereira-de-Oliveira LA, Castro-Gomes JP, Santos PMS (2012) The potential pozzolanic activity of glass and red-clay ceramic waste as cement mortars components. Constr Build Mater 31:197–203. https://doi.org/10.1016/j.conbuildmat.2011.12.110
Puertas F, García-Díaz I, Barba A, Gazulla MF, Palacios M, Gómez MP, Martínez-Ramírez S (2008) Ceramic wastes as alternative raw materials for Portland cement clinker production. Cem Concr Compos 30(9):798–805. https://doi.org/10.1016/j.cemconcomp.2008.06.003
Ranjbar MM, Mousavi SY (2015) Strength and durability assessment of self-compacted lightweight concrete containing expanded polystyrene. Mater Struct 48(4):1001–1011. https://doi.org/10.1617/s11527-013-0210-6
Raval AD, Patel IN, Pitroda J (2013) Re-use of ceramic industry wastes for the elaboration of eco-efficient concrete. Int J Adv Eng Res Stud 2(3):103–105
Saint-Pierre F, Philibert A, Giroux B, Rivard P (2016) Concrete quality designation based on ultrasonic pulse velocity. Constr Build Mater 125:1022–1027. https://doi.org/10.1016/j.conbuildmat.2016.08.158
Senthamarai RM, Devadas Manoharan P, Gobinath D (2011) Concrete made from ceramic industry waste: durability properties. Constr Build Mater 25(5):2413–2419. https://doi.org/10.1016/j.conbuildmat.2010.11.049
Shahidan S, Tayeh BA, Jamaludin AA, Bahari NAAS, Mohd SS, Ali NZ, Khalid FS (2017) Physical and mechanical properties of self-compacting concrete containing superplasticizer and metakaolin. In: IOP Conference Series: Materials Science and Engineering, vol 271, no. 1, IOP Publishing, p 012004
Silva J, De Brito JMCL, Veiga R (2010) Recycled red-clay ceramic construction and demolition waste for mortars production. J Mater Civ Eng 22(3):236–244. https://doi.org/10.1061/(ASCE)0899-1561(2010)22:3(236)
Sor NAH (2018) The effect of superplasticizer dosage on fresh properties of self-compacting lightweight concrete produced with coarse pumice aggregate. J Garmian Univ 5(2):190–209
Tamut T, Prabhu R, Venkataramana K, Yaragal SC (2014) Partial replacement of coarse aggregates by expanded polystyrene beads in concrete. Int J Res Eng Technol 3(02):238–241
Tawfik TA, Metwally KA, El-Beshlawy SA, Al Saffar DM, Tayeh BA, Hassan HS (2020) Exploitation of the nanowaste ceramic incorporated with nano silica to improve concrete properties. J King Saud Univ Eng Sci. https://doi.org/10.1016/j.jksues.2020.06.007
Tayeh BA (2018) Effects of marble, timber, and glass powder as partial replacements for cement. J Civ Eng Constr 7(2):63–71
Vakhshouri B, Nejadi S (2016) Mix design of light-weight self-compacting concrete. Case Stud Constr Mater 4:1–14. https://doi.org/10.1016/j.cscm.2015.10.002
Wee T-H, Babu DS, Tamilselvan T, Lim H-S (2006) Air-void system of foamed concrete and its effect on mechanical properties. ACI Mater J 103(1):45
Wu Z, Zhang Y, Zheng J, Ding Y (2009) An experimental study on the workability of self-compacting lightweight concrete. Constr Build Mater 23(5):2087–2092
Xu Y, Jiang L, Xu J, Chu H, Yang L (2015) Prediction of compressive strength and elastic modulus of expanded polystyrene lightweight concrete. Mag Concr Res 67(17):954–962. https://doi.org/10.1680/macr.14.00375
Yang S, Yue X, Liu X, Tong Y (2015) Properties of self-compacting lightweight concrete containing recycled plastic particles. Constr Build Mater 84:444–453. https://doi.org/10.1016/j.conbuildmat.2015.03.038
Author information
Authors and Affiliations
Contributions
Nadhim HAMAH SOR (corresponding author): idea of concept; planning; validation; resources; data curation; writing—original draft; writing—review and editing for this manuscript. Nahla Hilal: experimental work done; planning and designing; validation; writing—review for this manuscript. Rabar H. Faraj: validation; resources; data curation; writing—review for this manuscript.
Corresponding author
Ethics declarations
Ethical approval
Not applicable.
Consent to participate
Not applicable.
Consent to publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Highlights
• Increasing the volume fractions of EPS particles improved the durability performance of SCLC but reduced its mechanical properties.
• The workability of SCLC improved as EPS incorporation increased.
• Recycling a high volume of ceramic wastes as powder and fine aggregate in SCLC production.
• Sustainable SCLC with higher EPS content as cleaner production can be used for structural purposes.
• A strong linear correlation between the tests results can be observed.
Rights and permissions
About this article
Cite this article
Hilal, N., Hamah Sor, N. & Faraj, R.H. Development of eco-efficient lightweight self-compacting concrete with high volume of recycled EPS waste materials. Environ Sci Pollut Res 28, 50028–50051 (2021). https://doi.org/10.1007/s11356-021-14213-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-021-14213-w