Erratum to: METALLURGICAL AND MATERIALS TRANSACTIONS A, Vol. 38A, No. 2, February 2007, pp. 401–08 DOI: 10.1007/s11661-006-9061-x
There is an error in the first sentence, second paragraph on page 401. The sentence should read as follows:
A FSW tool was used by Mishra and co-workers [10] to locally modify the microstructure of a monolithic plate of 7075-T651 aluminum, a technique referred to as friction stir processing (FSP).
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1007/s11661-006-9061-x.
Rights and permissions
About this article
Cite this article
Pilchak, A., Juhas, M. & Williams, J. Microstructural Changes Due to Friction Stir Processing of Investment-Cast Ti-6Al-4V. Metall Mater Trans A 38, 1376 (2007). https://doi.org/10.1007/s11661-007-9195-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-007-9195-5