Abstract
The present work analyzes the application of quenching and partitioning processing to medium Mn steel to obtain a new type of ultra-high-strength multiphase medium Mn steel. The selection of the quench temperature makes it possible to vary the ultimate tensile strength within a range of 500 MPa. The processing leads to low-carbon lath martensite matrix with a controlled volume fraction of retained austenite.
References
B.C. De Cooman, O. Kwon, K. Chin, Mater. Sci. Technol. 28 (2012) 513-527.
C. Scott, S. Allain, M. Faral, N. Guelton, Revue de Métallurgie 103 (2006) 293-302.
S. Lee, S.-J. Lee, B.C. De Cooman, Acta Mater. 59 (2011) 7546-7553.
H. Aydin, E. Essadiqi, I.-H. Jung, S. Yue, Mater. Sci. Eng. A 564 (2013) 501-508.
S. Lee, B.C. De Cooman, Metall. Mater. Trans. A 45 (2014) 709-716.
J.G Speer, A.M. Streicher, D.K. Matlock, F. Rizzo, G. Krauss, Austenite Formation and Decomposition, ISS/TMS, Warrendale, PA, 2003, pp. 505-522.
E. Paravicini Bagliani, M.J. Santofimia, L. Zhao, J. Sietsma, E. Anelli, Mater. Sci. Eng. A 559 (2013) 486-495.
H. Jirková, L. Kučerová, V. Průcha, and B. Mašek: Proc. 21st Int. Conf. Metall. Mater. 2012, TANGER Ltd., Brno Czech Republic, EU, 2012, pp. 532–38.
E. De Moor, J.G. Speer, D.K. Matlock, J.-H. Kwak, S.-B. Lee, ISIJ Int. 51 (2011) 137-144.
G. Miyamoto, J.C. Oh, K. Hono, T. Furuhara, T. Maki, Acta Mater. 55 (2007) 5027-5038.
E.J. Seo, L. Cho, B.C. De Cooman, Metall. Mater. Trans. A 45A (2014) 4022-4037.
B.D. Cullity, S.R. Stock, Elements of X-ray diffraction. New Jersey, Pearson, 2001, p. 365-369.
D. Dyson, B. Holmes, J Iron Steel Inst. 208 (1970) 469-474.
N.H. van Dijk, A.M. Butt, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright, S. van der Zwaag, Acta Mater. 53 (2005) 5439-5447.
C. Kung, J. Rayment, Metall. Mater. Trans. A 13A (1982) 328-331.
K. Andrews, J Iron Steel Institute 203 (1965) 721-727.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted July 21, 2014.
Rights and permissions
About this article
Cite this article
Seo, E.J., Cho, L. & De Cooman, B.C. Application of Quenching and Partitioning Processing to Medium Mn Steel. Metall Mater Trans A 46, 27–31 (2015). https://doi.org/10.1007/s11661-014-2657-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-014-2657-7