References
K. Satoh and M. Toyoda: Proc. 7th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, TX, ASME, Golden, CO, 1988, pp. 495–502.
R. Denys and H.I. McHenry: Proc. 7th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, TX, ASME, Golden, CO, 1988, pp. 379–85.
K. Uchino and Y. Ohno: in Welding Metallurgy of Structural Steels, J.Y. Koo, ed., TMS, Denver, CO, 1987, pp. 159–65.
T. Haze and S. Aihara: Proc. 7th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, TX, ASME, Golden, CO, 1988, pp. 515–23.
J.Y. Koo and A. Ozekcin: in Welding Metallurgy of Structural Steels, J.Y. Koo, ed., TMS, Denver, CO, 1987, pp. 119–35.
B.C. Kim, S. Lee, N.J. Kim, and D.Y. Lee: Metall. Trans. A, 1991, vol. 22A, pp. 139–49.
I. Hiroshi, O. Hiroaki, and T. Toyoaki: J. Jpn Weld. Soc., 1980, vol. 7, p. 47.
N.J. Kim and G. Thomas: Metall. Trans. A, 1981, vol. 12A, pp. 483–89.
S. Lee, K.-S. Sohn, I.M. Park, and K. Cho: Met. Mater., 1995, vol. 1, pp. 37–46.
N.J. Kim and A.H. Nakagawa: Mater. Sci. Eng., 1986, vol. 83, pp. 145–49.
Author information
Authors and Affiliations
Additional information
This work was supported by Pohang Iron and Steel Co., Ltd. and the Korea Science and Engineering Foundation.
Rights and permissions
About this article
Cite this article
Suh, D., Kwon, D., Lee, S. et al. Orientation dependence of microfracture behavior in a dual-phase high-strength low-alloy steel. Metall Mater Trans A 28, 504–509 (1997). https://doi.org/10.1007/s11661-997-0152-0
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-997-0152-0