Abstract
A mathematical model was developed to calculate the transient temperature and velocity distributions in a stationary gas tungsten arc (GTA) weld pool of 304 stainless steels with different sulfur concentrations. A parametric study showed that, depending upon the sulfur concentration, one, two, or three vortexes may be found in the weld pool. These vortexes are caused by the interaction between the electromagnetic force and surface tension, which is a function of temperature and sulfur concentration, and have a significant effect on weld penetration. For given welding conditions, a minimum threshold sulfur concentration is required to create a single, clockwise vortex for deep penetration. When two metals with different sulfur concentrations are welded together, the weld-pool shape is skewed toward the metal with a lower sulfur content. Detailed physical insights on complicated fluid-flow phenomena and the resulting weld-pool penetration were obtained, based on the surface tension-temperature-sulfur concentration relationships.
Similar content being viewed by others
References
G.W. Oyler, R.A. Matuszesk, and C.R. Garr: Welding J., 1967, vol. 46, pp. 1006–11.
C.R. Heiple, R.J. Cluley, and R.D. Dixon: in Physical Metallurgy of Metal Joining, R. Kossowsky and M.E. Glicksman, eds., TMS-AIME, Warrendale, PA, 1980, pp. 160–65.
C.R. Heiple and J.R. Roper: Welding J., 1981, vol. 60, pp. 143s-145s.
C.R. Heiple, P. Burgardt, and J.R. Roper: Modeling of Casting and Welding Process II, J.A. Dantzig and J.T. Berry, eds., TMS-AIME, Warrendale, PA, 1984, pp. 193–205.
C.R. Heiple and J.R. Roper: Welding J., 1982, vol. 61, pp. 97s-102s.
C.R. Heiple, J.R. Roper, R.T. Stagner, and R.J. Aden: Welding J., 1983, vol. 62, pp. 72s-77s.
C.R. Heiple and P. Burgardt: Welding J., 1985, vol. 64, pp. 159s-162s.
S. Kou and Y.H. Wang: Welding J., 1986, vol. 65, pp. 63s-70s.
S. Kou and D.K. Sun: Metall. Trans. A, 1985, vol. 16A, pp. 203–13.
M.C. Tsai and S. Kou: Int. J. Num. Meth. Fluids, 1989, vol. 9, pp. 1503–16.
T. Zacharia, A.H. Eraslan, and D.K. Aidun: Welding J., 1988, vol. 67, pp. 53s-62s.
T. Zacharia, S.A. David, J.M. Vitek, and T. DebRoy: Welding J., 1989, vol. 68, pp. 499s-509s.
T. Zacharia, A.H. Eraslan, D.K. Aidun, and S.A. David: Metall. Trans. B, 1989, vol. 20B, pp. 645–59.
T. Zacharia, S.A. David, and J.M. Vitek: Metall. Trans. B, 1991, vol. 22B, pp. 233–41.
G.M. Oreper and J. Szekely: J. Fluid Mech., 1984, vol. 147, pp. 53–79.
M.E. Thompson and J. Szekely: Int. J. Heat Mass Transfer, 1989, vol. 32, pp. 1007–19.
R.T.C. Choo, J. Szekely, and R.C. Welsthoff: Welding J., 1990, vol. 69, pp. 346s-361s.
R.T.C. Choo and J. Szekely: Welding J., 1992, vol. 71, pp. 77s-93s.
R.T.C. Choo, J. Szekely, and S.A. David: Metall. Trans. B, 1992, vol. 23B, pp. 371–84.
S.D. Kim and S.J. Na: Welding J., 1992, vol. 71, pp. 179s-193s.
R.A. Wood and D.R. Milner: Welding J., 1971, vol. 50, pp. 163s-173s.
B.J. Keene, K.C. Mills, J.W. Bryant, and E.D. Hondros: Can. Metall. Q., 1982, vol. 21, pp. 393–403.
K.C. Mills and B.J. Keene: Int. Mater. Rev., 1990, vol. 35, pp. 185–216.
P. Burgardt and R.D. Campbell: Key Eng. Mater., 1992, vols. 69–70, pp. 379–416.
Q.Z. Diao and H.L. Tsai: Metall. Trans. A, 1993, vol. 24A, pp. 963–73.
M.C. Flemings: Solidification Processing, McGraw-Hill, Inc., New York, NY, 1974, pp. 244–52.
M.J. Voss and H.L. Tsai: Int. J. Eng. Sci., 1996, vol. 34, pp. 715–37.
M. Choi, R. Greif, and M. Salcudean: Num. Heat Transfer, 1987, vol. 11, pp. 477–89.
P. Sahoo, T. DebRoy, and M.J. McNallan: Metall. Trans. B, 1988, vol. 19B, pp. 483–91.
S.V. Patankar: Numerical Heat Transfer and Fluid Flow, Hemisphere, New York, NY, 1980, pp. 96–102.
K.C. Chiang and H.L. Tsai: Int. J. Heat Mass Transfer, 1992, vol. 35, pp. 1771–78.
Q.Z. Diao and H.L. Tsai: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1051–62.
H.G. Kraus: Welding J., 1989, vol. 68, pp. 84s-91s.
H.G. Kraus: Welding J., 1989, vol. 68, pp. 269s-279s.
W.D. Bennon and F.P. Incropera: Int. J. Heat Mass Transfer, 1987, vol. 30, pp. 2171–87.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wang, Y., Shi, Q. & Tsai, H.L. Modeling of the effects of surface-active elements on flow patterns and weld penetration. Metall Mater Trans B 32, 145–161 (2001). https://doi.org/10.1007/s11663-001-0017-7
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-001-0017-7