Abstract
A simplified model predicting the heat transfer performance of a heat sink base with a high thermal conductivity was developed. Numerical analysis was performed using the commercial software FLUENT. The investigation indicates that for heat sink bases with a high effective thermal conductivity, such as the base embedded with a typical heat pipe, the entire heat sink can be modeled as a flat plate with a uniform temperature and an effective convection heat transfer coefficient. This simplified model can be used to determine the heat transfer performance of a heat sink embedded with a typical heat pipe or vapor chamber.
Similar content being viewed by others
References
Zhang M, Liu Z, Ma G. The experimental and numerical investigation of a grooved vapor chamber. Applied Thermal Engineering, 2009, 29(2,3): 422–430
Koito Y, Imura H, Mochizuki M, Saito Y, Torii S. Fundamental experiments and numerical analyses on heat transfer characteristics of a vapor chamber (Effect of heat source size). JSME International Journal, Series B: Fluids and Thermal Engineering, 2007, 49(4):1233–1240
Prasher R S. A simplified conduction based modeling scheme for design sensitivity study of thermal solution utilizing heat pipe and vapor chamber technology. ASME Journal of Electronic Packaging, 2003, 125(3): 378–385
Ma H B, Peterson G P. The influence of the thermal conductivity on the heat transfer performance in a heat sink. ASME, Journal of Electronic Packaging, 2002, 1–6
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Borgmeyer, B.V., Ma, H.B. Heat-spreading analysis of a heat sink base embedded with a heat pipe. Front. Energy Power Eng. China 4, 143–148 (2010). https://doi.org/10.1007/s11708-010-0013-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11708-010-0013-1