Skip to main content
SpringerLink
Log in

The non-hydrostatic response of polymer melts as a pressure medium in sheet metal forming

  • Production Process
  • Published:
Production Engineering Aims and scope Submit manuscript

Abstract

The polymer injection forming process is a recent invention for producing plastic–metal hybrids. It is a combination of injection molding and sheet metal hydroforming process in which polymer melt serves as a pressure medium. This paper presents the experimental investigations on the non-Newtonian nature of thermoplastic melt as pressure medium. The objective of this work is to identify the presence of non-hydrostatic pressure distribution within the cavity and its influence on the final shape of the formed sheet metal component. Experiments are conducted with center-gated injection mold under varying processing conditions. The development of localized cavity pressure during the process is recorded and evaluated against the final shape of formed sheet metal. It has been observed that higher injection rate, higher injection temperature, and higher melt flow index of the processed polymer is necessary for the uniform pressure distribution and subsequently uniform forming of the sheet metal.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20

Similar content being viewed by others

References

  1. Corus Technology Bv (NL) (2003) Method and device for producing a composite product, and composite product produced there with. Patent WO2003/057446

  2. http://www.syntens.nl/materialenkring/archief/Documents/070424/PIF%20presentatie%20Corus.pdf

  3. Johannaber F (2004) Handbuch spritzgiessen. Hanser Verlag, München

    Google Scholar 

  4. Osswald TA, Turng L-S, Gramann PJ (2008) Injection molding handbook. Hanser Gardner Publications, Cincinnati

    Google Scholar 

  5. Singh H (2003) Fundamentals of hydroforming. Society of Manufacturing Engineers, Michigan

    Google Scholar 

  6. Marciniak Z, Duncan JL, Hu SJ (2002) Mechanics of sheet. Metal forming, 2nd edn. Butterworth-Heinemann, Oxford

    Google Scholar 

  7. Chen M, Zhang X, Lei Q, Fu J (2002) Finite element analysis of forming of sheet metal blank in manufacturing metal/polymer macro-composite components via injection moulding. Int J Mach Tools Manuf 42:375–383

    Article  Google Scholar 

  8. Lucchetta G, Baesso R (2007) Polymer injection forming (PIF) of thin-walled sheet metal parts—preliminary experimental results. AIP conference proceedings, vol 907, pp 1046–1051

  9. Lenk RS (1978) Polymer rheology. Springer, Berlin

    Book  Google Scholar 

  10. Yang SY, Parng SH (2001) Injection molding of ribbed plastic plates with a superplastic Zn-22 % Al sheet. Adv Polym Technol 20(3):216–225

    Article  Google Scholar 

  11. Yang SY, Parng SH (2001) Fracture types and thickness distribution in superplastic sheets formed with plastic injection molding. Mater Manuf Process 16(4):503–518

    Article  Google Scholar 

  12. Hussain MM, Rauscher B, Trompeter M, Tekkaya AE (2009) Potential of melted polymer as pressure medium in sheet metal forming. Key Eng Mater 410-411:493–502

    Article  Google Scholar 

  13. Gutscher G, Wu H-C, Altan T (2004) Determination of flow stress for sheet metal forming using the viscous pressure bulge (VPB) test. J Mater Process Technol 146:1–7

    Article  Google Scholar 

  14. Hussain MM (2010) Investigation on the use of polymer melt as a pressure medium in sheet metal forming. Kolloquium Graduiertenkolleg 1378/1, LWT TU-Dortmund, pp 68–77

  15. Hussain MM (2009) Grundlagenuntersuchungen zur blechumformung durch kunststoff-spritzdruck. Kolloquium Graduiertenkolleg 1378/1, Produktionstechnisches Zentrum (PZH), Garbsen, pp 56–61

Download references

Author information

Authors and Affiliations

  1. Institute of Forming Technology and Lightweight Construction, Baroper Str. 301, 44227, Dortmund, Germany

    A. E. Tekkaya, M. M. Hussain & J. Witulski

Authors
  1. A. E. Tekkaya
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. M. Hussain
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. J. Witulski
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to M. M. Hussain.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Tekkaya, A.E., Hussain, M.M. & Witulski, J. The non-hydrostatic response of polymer melts as a pressure medium in sheet metal forming. Prod. Eng. Res. Devel. 6, 385–394 (2012). https://doi.org/10.1007/s11740-012-0392-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11740-012-0392-8

Keywords

Search

Navigation