Abstract
In this paper, a special-purpose CAD/CAM software package, BliskCad/Cam, based on a commercial CAD/CAM software Unigraphics is developed to reduce difficulties in CNC-EDM of the shrouded turbine blisks. The software package consists of five modules such as electrode design, path searching, and machining simulation module. Functions of BliskCad/Cam include parametrical reconstruction of 3-D model of the blisk, intelligent design of complex shaped electrode, automatic generation of NC codes, search of interference-free tool path for multi-axis NC-EDM and machining simulation, etc. Experimental verification is conducted by using BliskCad/Cam and the results show that it satisfies the requirements, and can realize precision machining and reduce accessorial time remarkably.
Similar content being viewed by others
References
Zhao Wan-sheng, Zhan Han-jing, Wang Gang. Machining technology used in turbine blisk[J]. Aviation Precision Manufacturing Technology, 2000, 36(5): 1–5 (in Chinese).
Liang Chun-hua. New technologies used for commercial aircraft engines[J]. International Aviation, 2002, (9): 53–54 (in Chinese).
Zhao Su-fang, Yun Nai-zhang, Xu Wen-yan, Xu Jia-wen. Investigation and analysis on machining method for channels of integrated impeller with annular corona[J]. Aeronautical Manufacturing Technology, 2004, (4): 86–87 (in Chinese).
Zhan Han-jing, Zhao Wan-sheng, Wang Gang. Manufacturing turbine blisks[J]. Aircraft Engineering and Aerospace Technology, 2000, 72(3): 247–251.
Zhan Han-jing, Zhao Wan-sheng. EDMing turbopump blisks[J]. Aircraft Engineering and Aerospace Technology, 2002, 74(1): 19–22.
Zhang Lei, Yun Nai-zhang, Guo Zi-gui. The application of integrated turbine with ring and research on its manufacturing technique[J]. Electromachining and Mould, 2003, (2): 29–31 (in Chinese).
Zhao Wang-sheng, Wu Xiang, Zhan Han-jing, Tian Ji-an, Chen Ji-lun, Meng Fan-xin. CAD/CAM of rimed blisks[J]. Journal of Propulsion Technology, 2003, 24(4): 380–383 (in Chinese).
Wu Xiang, Zhao Wan-sheng, Wang Zhen-long, Shang Xue-qian, Chen Ji-lun, Tian Ji-an. Design and manufacture of electrode for EDMing rimed turbine blisks[J]. Aerospace Manufacturing Technology, 2003, (6): 4–7 (in Chinese).
Zhao Wan-sheng, Zhan Han-jing, Wang Gang, Liu Wentao. Feeding complex electrode through twist channels of rimed turbine blisks[J]. Journal of National University of Defense Technology, 2000, 22(5): 78–82 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Li, G., Zhao, Ws., Wang, Zl. et al. A special CAD/CAM software for electro-discharge machining of shrouded turbine blisks. J. of Shanghai Univ. 11, 74–78 (2007). https://doi.org/10.1007/s11741-007-0113-2
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/s11741-007-0113-2