Abstract
One of the keys to developing viable solid oxide fuel cell (SOFC) systems is to first develop reliable and inexpensive stack sealing technology. Three general approaches are currently being pursued: rigid bonded sealing, compressive sealing, and compliant bonded sealing. This review highlights the advantages and limitations of each option, discusses some of the leading concepts, and out-lines the future steps that need to be taken in their development.
Similar content being viewed by others
References
D.L. Klass, Energy Policy, 31 (2003), p. 353.
K.S. Deffeyes, Hubbert's Peak, The Impending World Oil Shortage (Princeton, NJ: Princeton University Press, 2001).
J. Larmine and A. Dicks, Fuel Cell Systems Explained (West Sussex, U.K., Wiley & Sons, 1999).
M.L. Perry and T.F. Fuller, J. Electrochem. Soc., 149 (2002), p. S59.
N.Q. Minh, J. Amer. Cer. Soc., 76 (1993), p. 563.
T. Iwata and Y. Enami, J. Electrochem. Soc., 145 (1998), p. 931.
J. Hartvigsen et al., Ceram. Trans., 65 (1996), p. 279.
J. Fergus, J. Power Sources, 147 (2005), p. 46.
P. Singh and N.Q. Minh, Int. J. Appl. Cer. Techn., 1 (2004), p. 5.
A.B. Stambouli and E. Traversa, Ren. & Sust. Energy Rev., 6 (2002), p. 433.
X. Wang, N. Nakagawa, and K. Kato, Electrochemistry, 70 (2002), p. 252.
M. Sase et al., J. Phys. Chem. Sol., 66 (2005), p. 343.
J.Y. Yi and G.M. Choi, J. Eur. Cer. Soc., 25 (2005), p. 2655.
K. Kokini and R.W. Perkins, AIAA Journal, 22 (1984), p. 1472.
J. Laurencin et al., Fuel Cells, 6 (2006), p. 64.
Z. Yang et al., J. Electrochem. Soc., 150 (2003), p. A1188.
S. Shaffer, “Development Update on Delphi's Solid Oxide Fuel Cell System” (Paper presented at the 2004 Solid State Energy Conversion Alliance Meeting, Boston, MA) www.netl.doe.gov/publications/proceedings/04/seca-wrkshp/Delphi%20-%20Shaffer.pdf.
K. Ley et al., J. Mater. Res., 11 (1996), p. 1489.
F. Tietz, Ionics 5 (1999), p. 129.
P. Larsen et al., Solid Oxide Fuel Cells IV (Pennington, NJ: Electrochemical Society, 1995).
K.A. Nielsen et al., Ceramic Engineering & Science Procedings, Vol. 25 (Westerville, OH: American Ceramic Society, 2004), p. 309.
T. Schwickert et al., Proceedings of the 1st International Brazing and Soldering Conference (Materials Park, OH: ASM International, 2000), p. 116.
K. Eichler et al., J. Europ. Ceram. Soc., 19 (1999), p. 1101.
K.D. Meinhardt et al., U.S. patent 6,430,966 (2002).
S.-B. Sohn et al., J. Non-Cryst. Sol., 297 (2002), p. 103.
C. Lara, M.J. Pascual, and A. Duran, J. Non-Cryst. Sol., 348 (2004), p. 149.
M.B. Volf, Chemical Approach to Glass: Glass Science and Technology, Vol. 7, (New York: Elsevier, 1984).
Y.-N. Sung, J. Mater. Sci., 31 (1996), p. 5421.
S. Mukerjee et al., Solid Oxide Fuel Cells IX, Vol. I, (Pennington, NJ: Electrochemical Society, 2005), p. 48.
L. Blum et al., Solid Oxide Fuel Cells IX, Vol. I (Pennington, NJ: Electrochemical Society, 2005), p. 39.
K.G. Ewsuk and L.W. Harrison, Sintering of Advanced Ceramics. Ceramics Transactions Vol. 7 (Westerville, OH: American Ceramic Society, 1990).
M. Brochu et al., J. Amer. Ceram. Soc., 89 (2006), p. 810.
K.D. Meinhardt et al., Joining of Advanced and Specialty Materials VII, Proceedings from Materials Solutions 2004 (Materials Park, OH: ASM International, 2005), p. 124.
J. Zizelman, “Development Update on Delphi's Solid Oxide Fuel Cell System: from Gasoline to Electric Power” (Paper presented at the 4th Annual Solid State Energy Conversion Alliance Workshop, 15–16 April, 2003, Seattle WA), www.delphi.com/pdf/fuelcells/sofc_update_apr03.pdf.
www.netl.doe.gov/publications/proceedings/05/SECA_PeerReview/posters/UCinn%20Poster.pdf.
Z. Yang et al., Joining of Advanced and Specially Materials V, Proceedings from Materials Solutions 2002 (Materials Park, OH: ASM International, 2003) p. 116.
Z. Yang, K.D. Meinhardt, and J.W. Stevenson, J. Electrochem. Soc., 150 (2003), p. A1095.
K.D. Meinhardt, personal communication (2006).
C.A. Coyle et al., U.S. patent 6,843,406 (2005).
L.A. Chick et al., U.S. patent application 20,060,063,057 (2006).
R.W. Rice, Amer. Ceram. Soc. Bull., 62 (1983), p. 889.
E. Bouillon et al., J. Mater. Sci., 26 (1991), p. 1517.
C.A. Lewinsohn et al., J. Amer. Cer. Soc., 84 (2001), p. 2240.
C.A. Lewinsohn and S. Elangovan, Ceramic Engineering & Science Proceedings, Vol. 24 (Westerville, OH: American Ceramic Society, 2003), p. 317.
E. Pippel et al., J. Eur. Cer. Soc., 17 (1997), p. 1259.
P. Greil, J. Amer. Cer. Soc., 78 (1995), p. 835.
M. Bram et al., Solid Oxide Fuel Cells IX (Pennington, NJ: Electrochemical Society, 2003), p. 888.
J. Duquette and A. Petric, J. Power Sources, 137 (2004), p. 71.
M. Bram et al., Solid Oxide Fuel Cells VII (Pennington, NJ: Electrochemical Society, 2001), p. 875.
S.P. Simner and J.W. Stevenson, J. Power Sources, 102 (2001), p. 310.
Y.-S. Chou, J.W. Stevenson, and L.A. Chick, J. Power Sources, 112 (2002), p. 130.
Y.-S. Chou and J.W. Stevenson, J. Power Sources, 112 (2002), p. 376.
Y.-S. Chou and J.W. Stevenson, J. Power Sources, 135 (2004), p. 72.
Y.-S. Chou and J.W. Stevenson, J. Power Sources, 140 (2005), p. 340.
C.W. Fox and G.M. Slaughter, Weld. J., 43 (1964), p. 5971.
K.S. Weil and J.P. Rice, Scr. Mater., 52 (2005), p. 1081.
K.S. Weil, J.Y. Kim, and J.S. Hardy, Electrochem. Sol. St. Lett., 8 (2005), p. A133.
J.Y. Kim, J.S. Hardy, and K.S. Weil, J. Mater. Res., 20 (2005), p. 636.
J.T. Darsell and K.S. Weil, J. Ph. Equil. and Diff., 27 (1) (2006), p. 92.
J.Y. Kim and K.S. Weil, Ceramic Engineering and Science Proceedings, Vol. 27 (Westerville, OH: American Ceramic Society, 2006).
K.S. Weil et al., Scr. Mater., 54 (6) (2006), p. 1071.
K.S. Weil et al., J. Power Sources, 152C (2005) p. 97.
R.L. Kleuh and W.W. Mullins, Trans. Metall. Soc. of AIME, 242 (1968), p. 237.
J.Y. Kim. J.S. Hardy, and K.S. Weil, Inter. J. Hydrt. Energy, in press.
K.S. Weil et al., J. Mater. Eng. and Perf., in press.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Weil, K.S. The state-of-the-art in sealing technology for solid oxide fuel cells. JOM 58, 37–44 (2006). https://doi.org/10.1007/s11837-006-0052-6
Issue Date:
DOI: https://doi.org/10.1007/s11837-006-0052-6