Skip to main content
Log in

Electroless nickel–phosphorus deposition on carbon steel CK-75 and study of the effects of some parameters on properties of the deposits

  • Published:
Journal of Coatings Technology and Research Aims and scope Submit manuscript

Abstract

Electroless nickel–phosphorus (Ni–P) deposition provides coatings with high hardness and excellent resistance to wear and abrasion. In this study, autocatalytic deposition of Ni–P alloy has been carried out on steel CK-75 sheets from bath containing nickel sulfate hexahydrate, sodium hypophosphite hydrate, thiourea, lactic acid, and sodium acetate. The effects of lactic acid concentration, pH and temperature on deposition rate, composition of deposits, and hardness have been studied. Also the changes in the hardness and structure of deposits by heat-treatment were studied by X-ray diffraction and scanning electron microscopy methods. It is shown that deposits crystallized after heat-treatment at 400°C for 1 h and crystallization to Ni and Ni3P was observed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

Similar content being viewed by others

References

  1. Riedel, W, Electroless Nickel Plating. Finishing Publication Ltd/ASM International, Metals Park, OH (1991)

    Google Scholar 

  2. Oraon, B, Majumdar, G, Ghosh, B, “Application of Response Surface Method for Predicting Electroless Nickel Plating.” Mater. Des., 27 (10) 1035–1045 (2006)

    Article  CAS  Google Scholar 

  3. Balaraju, JN, Sankara Narayanan, TSN, Seshadri, SK, “Structure and Phase Transformation Behaviour of Electroless Ni–P Composite Coatings.” Mater. Res. Bull., 41 (4) 847–860 (2006)

    Article  CAS  Google Scholar 

  4. Cheong, WJ, Luan, BL, Shoesmith, DW, “The Effects of Stabilizers on the Bath Stability of Electroless Ni Deposition and the Deposit.” Appl. Surf. Sci., 229 (1–4) 282–300 (2004)

    Article  CAS  Google Scholar 

  5. Malecki, A, Micek-Ilnicka, A, “Electroless Nickel Plating From Acid Bath.” Surf. Coat. Technol., 123 (1) 72–77 (2000)

    Article  CAS  Google Scholar 

  6. Keong, KG, Sha, W, Malinov, S, “Crystalization Kinetics and Phase Transformation Behaviour of Electroless Nickel-Phosphorus Deposite with Low and Mdium Phosphorus Contents Under Continuous Heating.” J. Mater. Sci., 37 (20) 4445–4450 (2000)

    Article  Google Scholar 

  7. Keong, KG, “Crystalization Kinetics and Phase Transformation Behaviour of Electroless Nickel-Phosphorus Deposite with 6-9 wt% Phosphorus Content.” Acta Metall. Sin., 14 (6) 419–424 (2001)

    CAS  Google Scholar 

  8. Keong, KG, Sha, W, Malinov, S, “Crystallisation Kinetics and Phase Transformation Behaviour of Electroless Nickel–Phosphorus Deposits with High Phosphorus Content.” J. Alloys Compd., 334 (1–2) 192–199 (2002)

    Article  CAS  Google Scholar 

  9. Baskaran, I, Sankara Narayanan, TSN, Stephan, A, “Effect of Accelerators and Stabilizers on the Formation and Characteristics of Electroless Ni–P Deposits.” Mater. Chem. Phys., 99 (1) 117–126 (2006)

    Article  CAS  Google Scholar 

  10. Gao, J, Liu, L, Wu, Y, Shen, B, Hu, W, “Electroless Ni–P–SiC Composite Coatings with Superfine Particles.” Surf. Coat. Technol., 200 (20–21) 5836–5842 (2006)

    CAS  Google Scholar 

  11. Baudrand, DW, Electroless Nickel Plating, ASM Handbook, vol. 5, pp. 290–305. ASM International, Materials Park (1994)

  12. Keong, KG, Sha, W, Malinov, S, “Computer Modelling of the Non-Isothermal Crystallization Kinetics of Electroless Nickel–Phosphorus Deposits.” J. Non-Cryst. Solids, 324 (3) 230–241 (2003)

    Article  CAS  Google Scholar 

  13. Gao, J, Wu, Y, Liu, L, Shen, B, Hu, W, “Crystallization Temperature of Amorphous Electroless Nickel–Phosphorus Alloys.” Mater. Lett., 59 (13) 1665–1669 (2005)

    Article  Google Scholar 

  14. Tachev, D, Iorgov, D, Armyanov, S, “Magnetothermal Investigation of Crystallization of Ni–P Amorphous Alloys.” J. Non-Cryst. Solids, 270 (1–3) 66–73 (2000)

    Article  CAS  Google Scholar 

  15. Zhou, XW, Jin, HM, Zhang, LN, “Influence of pH Value on Microstructure and Thermal Stability of Ni–P Electroless Coating Prepared in Acidic Condition.” Chin. Chem. Lett., 20 (7) 845–848 (2009)

    Article  CAS  Google Scholar 

  16. Cui, G, Li, N, Li, D, Zheng, J, Wu, Q, “The Physical and Electrochemical Properties of Electroless Deposited Nickel–Phosphorus Black Coatings.” Surf. Coat. Technol., 200 (24) 6808–6814 (2006)

    Article  CAS  Google Scholar 

  17. Mahmoud, SS, “Electroless Deposition of Nickel and Copper on Titanium Substrates: Characterization and Application.” J. Alloys Compd., 472 (1–2) 595–601 (2009)

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to H. Modarress.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Molla, H.R., Modarress, H. & Abdouss, M. Electroless nickel–phosphorus deposition on carbon steel CK-75 and study of the effects of some parameters on properties of the deposits. J Coat Technol Res 9, 183–188 (2012). https://doi.org/10.1007/s11998-009-9231-z

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11998-009-9231-z

Keywords

Navigation