Abstract
This paper addresses the weldability, microstructure and mechanical properties of the multi-pass welding of super-duplex stainless steel (SDSS). Pulsed current gas tungsten arc welding (PCGTAW) was carried out employing ER2553 and ERNiCrMo-4 fillers. Microstructure examination showed the presence of austenite in different forms at the weld zone of ER2553 whereas multi-directional grain growth was observed for ERNiCrMo-4 welds. Tensile and impact studies corroborated that the weldments employing ER2553 exhibited better results compared with ERNiCrMo-4 weldments. Detailed structure–property relationships of the weldments have been reported in the present study. The results corroborated that the enhanced properties could be achieved with the matching filler wire compared with the over-alloyed filler.
Similar content being viewed by others
References
Gooch T G 1982 Conference on duplex stainless steels’ 82 (St. Louis, MO: ASM 573)
ASM Specialty handbook on stainless steels 1994 (Ohio: American Society for Metals)
Muthupandi V, Bala Srinivasan P, Seshadri S K and Sundaresan S 2003 Mater. Sci. Eng. A 358 9
Karunakaran N 2012 Int. J. Eng. Technol. 2 1908
Cottis R A and Newman R C 1995 Stress corrosion cracking resistance of duplex stainless steels, Health and Safety Executive—Offshore Technology UK HMSO Report
Hsieh R I, Liou H Y and Pan Y T 2001 J. Mater. Sci. Perform. 10 526
Norsok Standard M601-94 2004 Welding and inspection of piping. Lysaker (Norway: Standards Norway)
Wang S-H, Chiu P-K, Yang J-R and Fang J 2006 Mater. Sci. Eng. A 420 26
Yousefieh M, Shamanian M and Saatchi A 2011 J. Iron Steel Res. Int. 18 78
Alber Sadek A, Abass M, Zaghloul B, Elrefaey A and Ushio M 2011 Trans. JWRI 29 21
Gooch T G 1996 Welding Res. Suppl. 135s
Tavares S S M, Pardal J M, Lima L D, Bastos I N, Nascimento A M and de Souza J A 2007 Mater. Charact. 58 610
Devendranath Ramkumar K, Thiruvengatam G, Sudharsan S P, Mishra D, Arivazhagan N and Sridhar R 2014 Mater. Des. 60 125
Sindu Kuo 2003 Welding metallurgy (Hoboken, New Jersey: John Wiley & Sons, Inc.)
Cao L and Hertzman S 1991 Proceedings of the duplex stainless steel ’91, Vol 1 p 363
Udayakumar T, Raja K, Tanksale Abhijit and Sathiya P 2013 J. Manuf. Process. 15 558
Florin C, Alin N and Dan D 2010 Annals of the Oradea University (Fascicle of Management and Technological Engineering IX) (XIX)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
RAMKUMAR, K.D., MISHRA, D., THIRUVENGATAM, G. et al. Investigations on the microstructure and mechanical properties of multi-pass PCGTA welding of super-duplex stainless steel. Bull Mater Sci 38, 837–846 (2015). https://doi.org/10.1007/s12034-015-0915-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12034-015-0915-y