Abstract
The examination of the exact solution of the governing equation of the rectangular plate is important for many reasons. This report discusses in exact solution of the governing equation of an isotropic rectangular plate with four clamped edges. A numerical method for clamped isotropic rectangular plate under distributed loads and an exact solution of the governing equation in terms of trigonometric and hyperbolic function are given. Finally, an illustrative example is given and the results are compared with those reported earlier. This method is found to be easier and effective. The results show reasonable agreement with other available results, but with a simpler and practical approach.
Similar content being viewed by others
References
Erdogan M E, Arpaci A 1990 On the deflections of uniformly loaded rectangular plates with clamped edges. Unpublished work
Evans T H 1939 Tables of moments and deflections for a rectangular plate fixed on all edges and carrying a uniformly distributed load. J. Appl. Mech. Trans. ASME 6: A7–A10
Hencky H 1913 Der Spannungszustand in rechteckigen Platten. Ph.D Thesis, Darmstadt, R. Oldenburg, Munich, Berlin
Hutchinson J R 1992 On the bending of rectangular plates with two opposite edges simply supported. J. Appl. Mech. Trans. ASME 59: 679–681
Imrak C E, Gerdemeli I 2007 A numerical method for clamped thin rectangular plates carrying a uniformly distributed load. Int. Appl. Mech. (accepted to publish)
Szilard R 1974 Theory and analysis of plates (New Jersey: Prentice-Hall, Englewood Cliffs)
Taylor R L, Govindjee S 2004 Solution of clamped rectnagular plate problems. Communi. Numer. Meth. Eng. 20: 757–765
Timoshenko S P 1938 Bending of rectangular plates with clamped edges. Proc. 5th Int. Congress of Applied Mechanics, (MIT: USA) 40–43
Timoshenko S P, Woinowsky-Krieger S 1959 Theory of plates and shells (New York: McGraw-Hill)
Timoshenko S P, Gere J M 1961 Theory of elastic stabilit. (New York: McGraw-Hill)
Wang C M, Wang Y C, Reddy J N 2002 Problems and remedy for the Ritz method in determining stress resultant of corner supported rectangular plates. Comput. Struct. 80: 145–154
Wang D, El-Sheikh A I 2005 Large deflection mathematical analysis of rectangular plates. J. Eng. Mech. 131: 809–821
Wojtaszak I A 1937 The calculation of maximum deflection, moments, and shear for uniformly loaded rectangular plate with clamped edge. J. Appl. Mech. Trans. ASME 4: A173–A176
Young D 1940 Analysis of clamped rectangular plates. J. Appl. Mech. 62: A139–A142
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Erdem İmrak, C., Gerdemeli, I. The problem of isotropic rectangular plate with four clamped edges. Sadhana 32, 181–186 (2007). https://doi.org/10.1007/s12046-007-0016-8
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12046-007-0016-8