Skip to main content
SpringerLink
Log in

Emerging geothermal energy technologies

  • Published:
KSCE Journal of Civil Engineering Aims and scope Submit manuscript

Abstract

Geothermal energy, whether as a source of electricity or to heat or cool buildings, has an enormous potential as a renewable energy source. This paper presents a broad overview of geothermal energy, with a focus on the emerging technologies of Enhanced Geothermal Systems (EGS) and Ground Source Heat Pumps (GSHPs). EGS and GSHP systems are important because of their potential for widespread use, as opposed to traditional geothermal energy systems which are generally limited to tectonically active regions. Commercial application of EGS technology is some years off but its enormous potential demands investment for further research. GSHP heat pump technology is available now — policy makers need to be educated and the potential of GSHPs demonstrated. Research should focus on optimising the design of the in-ground component of GSHP systems to maximise their economic, as well as environmental, benefits.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Adam, D. and Markiewicz, R. (2009). “Energy from earth-coupled structures, foundations, tunnels and sewers.” Géotechnique, Vol. 59, pp. 229–236.

    Article  Google Scholar 

  • ASHRAE (2007). Chapter 32-Geothermal energy, In 2007 ASHRAE Handbook, American Society of Heating, Refrigerating and Air-Conditioning Engineers.

  • Australian Government (2008). Australian geothermal industry technology roadmap, Department of Resources, Energy and Tourism, Canberra.

    Google Scholar 

  • Banks, D. (2008). An introduction to thermogeology: Ground source heating and cooling, Blackwell Publishing, Oxford.

    Book  Google Scholar 

  • Bertani, R. (2010). “Geothermal power generation in the world 2005–2010 update report.” Proc. World Geothermal Congress. Bali, Indonesia.

  • Bloomquist, R. G. (1999). “Geothermal heat pumps four plus decades of experience.” GHC Bulletin.

  • Bourne-Webb, P. J., Amatya, B., Soga, K., Amis, T., Davidson, C., and Payne, P. (2009). “Energy pile test at Lambeth College, London: Geotechnical and thermodynamic aspects of pile response to heat cycles.” Géotechnique, Vol. 59, pp. 237–248.

    Article  Google Scholar 

  • Brandl, H. (2006). “Energy foundations and other thermo-active ground structures.” Géotechnique, Vol. 56, pp. 81–122.

    Article  Google Scholar 

  • Brandl, H. (2008). “Energy pile concepts.” Proc. Deep Foundations on Bored and Auger Piles, Ghent.

  • CSIRO (2010). Energy for buildings (overview — research). http://www.its.csiro.au/science/Energy-for-buildings.html.

  • Dickinson, P., Read, S., Deer, L., and Petersons, S. (2007). Geoscience Australia building, Canberra, Geothermal Air Conditioning: A 10 Year Review, Geoscience, Australia.

  • Geodynamics (2009). Annual report, Geodynamics Limited, Brisbane, Australia.

    Google Scholar 

  • GHC (2005). Geothermal direct-use case studies, Geo-Heat Centre, Oregon Institute of Technology.

  • International Geothermal Association (2010). Proc. World Geothermal Congress, Bali, Indonesia.

  • Kraft, T., Mai, P. M., Wiemer, S., Deichmann, N., Ripperger, J., Kastli, P., Bachmann, C., Fah, D., Wossner, J., and Giardini, D. (2009). “Enhanced geothermal systems: Mitigation risk in urban area.” EOS, Transactions of the American Geophysical Union, Vol. 90, pp. 273–274.

    Article  Google Scholar 

  • Lund, J. W., Freeston, D. H., and Boyd, T. L. (2010). “Direct utilization of geothermal energy 2010 worldwide review.” Proc. World Geothermal Congress, Bali, Indonesia.

  • MIT (2006). The future of geothermal energy, impact of Enhanced Geothermal Systems (EGS) on the United States in the 21st century, Massachusetts Institute of Technology, Cambridge, MA, USA.

    Google Scholar 

  • Musson, A., Harrison, B., Gordon, K., Wright, S., and Sandiford, M. (2009). “Thermal thinking: Optimal targeting for Australian geothermal explorers.” Proc. Australian Geothermal Energy Conference, Brisbane.

  • National Research Council (1996). Rock fractures and fluid flow, Committee on Fracture Characterization and Fluid Flow, U.S. National Committee for Rock Mechanics.

  • O’Connell, S. and Cassidy, S. F. (2003). “Recent large scale groundsource heat pump installations in Ireland.” Proc. International Geothermal Conference, Reykjavik.

  • Preene, M. and Powrie, W. (2009). “Ground energy systems: From analysis to geotechnical design.” Géotechnique, Vol. 59, pp. 261–271.

    Article  Google Scholar 

  • Rybach, L. and Sanner, B. (2000). “Ground-source heat pumps the European experience.” GHC Bulletin, pp. 16–26.

  • Sanner, B., Karytsas, C., Mendrinos, D., and Rybach, L. (2003). “Current status of ground source heat pumps and underground thermal energy storage in Europe.” Geothermics, Vol. 32, pp. 579–588.

    Article  Google Scholar 

  • Sanyal, S. K., Morrow, J. W., Butler, S. J., and Tait-Robertson, A. (2007). “Cost of electricity from enhanced geothermal systems.” Proc. 32nd Workshop on Geothermal Reservoir Engineering, Stanford University.

  • Sekine, K., Ooka, R., Yokoi, M., Shiba, Y., and Hwang, S. (2007). “Development of a ground-source heat pump system with ground heat exchanger utilizing the cast-in-place concrete pile foundations of buildings,” ASHRAE Transactions, Vol. 113, pp. 558–566.

    Google Scholar 

  • Sommerville, M., Wyborn, D., Chopra, P. N., Rahmann, S. S., Estrella, D., and van der Muellen, T. (1994). Hot dry rocks feasibility study, Australian Energy Research and Development Corporation Report 94/243.

  • Stanford University (2010). Proc. 35th Stanford Workshop on Geothermal Reservoir Engineering.

  • Toralde, J. S. S. and Nas, S. (2010). “Controlled pressure drilling applications for enhanced geothermal systems.” Proc. World Geothermal Congress, Bali, Indonesia.

  • Wang, X., Ma, C., and Lu, Y. (2009). “An experimental study of a direct expansion ground-coupled heat pump system in heating mode.” International Journal of Energy Research, Vol. 33, pp. 1367–1383.

    Article  Google Scholar 

  • WEC (1998). Survey of energy resources, World Energy Council.

  • Witte, H. J. L., van Gelder, A. J., and Serrao, M. (2002). “Comparison of design and operation of a commercial UK ground source heat pump project.” Proc. 1st International Conference on Sustainable Energy Technologies, Porto, Portugal.

  • Wood, C. J., Liu, H., and Riffat, S. B. (2009). “Use of energy piles in a residential building, and effects on ground temperature and heat pump efficiency.” Géotechnique, Vol. 59, pp. 287–290.

    Article  Google Scholar 

  • Yang, H., Cui, P., and Fang, Z. (2010). “Vertical-borehole groundcoupled heat pumps: A review of models and systems.” Applied Energy, Vol. 87, pp. 16–27.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Dept. of Infrastructure Engineering, University of Melbourne, Victoria, 3010, Australia

    I. W. Johnston, G. A. Narsilio & S. Colls

Authors
  1. I. W. Johnston
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. G. A. Narsilio
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Colls
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to I. W. Johnston.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Johnston, I.W., Narsilio, G.A. & Colls, S. Emerging geothermal energy technologies. KSCE J Civ Eng 15, 643–653 (2011). https://doi.org/10.1007/s12205-011-0005-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12205-011-0005-7

Keywords

Search

Navigation