Abstract
In this study, the crack evolution process of crumb rubber concrete (CRC) in a four-point bending tensile test was monitored using the acoustic emission (AE) technique. The peak frequency, distribution characteristics of the AE source, and the damage process based on the AE ring count during the crack evolution were analyzed. The test results revealed that the addition of rubber particles decreased the brittleness of cracks and improved the ductility of the concrete during the macro-cracking process. The AE positioning method could effectively monitor the evolution process of micro-cracks inside the concrete. Additionally, based on the statistical results of the AE source events and energy distribution, the position of macroscopic cracks could be predicted, and the random distribution of micro-cracks could be characterized. By introducing the Weibull distribution to describe the random growth process of micro-cracks, the damage inside the concrete could be qualitatively predicted. As the rubber particle content increased, the inherent micro-cracks inside the concrete also increased. The damage inside the concrete was biased toward the crack nucleation stage.
Similar content being viewed by others
References
Al-Tayeb MM, Bakar BA, Akil HM, Ismail H (2012) Performance of rubberized and hybrid rubberized concrete structures under static and impact load conditions. Experimental Mechanics 53(3):377–384, DOI: https://doi.org/10.1007/s11340-012-9651-z
Al-Tayeb MM, Bakar BA, Ismail H, Akil HM (2013) Effect of partial replacement of sand by recycled fine crumb rubber on the performance of hybrid rubberized-normal concrete under impact load: Experiment and simulation. Journal of Cleaner Production 59(1):284–289, DOI: https://doi.org/10.1016/j.jclepro.2013.04.026
Anzani A, Binda L, Carpinteri A, Lacidogna G, Manuello A (2007) Evaluation of the repair on multiple leaf stone masonry by acoustic emission. Materials and Structures 41(6):1169–1189, DOI: https://doi.org/10.1617/s11527-007-9316-z
ASTM E976-99 (2000) Standard guide for determining the reproducibility of acoustic emission sensor response. ASTM E976-99, ASTM International, West Conshohocken, PA, USA
Atahan AO, Yücel AÖ (2012) Crumb rubber in concrete: Static and dynamic evaluation. Construction and Building Materials 36:617–622, DOI: https://doi.org/10.1016/j.conbuildmat.2012.04.068
Carpinteri A, Lacidogna G, Niccolini G (2006) Critical behaviour in concrete structures and damage localization by acoustic emission. Key Engineering Materials 312:305–310, DOI: https://doi.org/10.4028/www.scientific.net/kem.312.305
Carpinteri A, Xu J, Lacidogna G, Manuello A (2012) Reliable onset time determination and source location of acoustic emissions in concrete structures. Cement and Concrete Composites 34(4):529–537, DOI: https://doi.org/10.1016/j.cemconcomp.2011.11.013
Chen C, Chen XD, Guo SS (2019a) Experimental study on acoustic emission characteristic of fatigue crack growth of self-compacting concrete. Structural Control and Health Monitoring 26(4), DOI: 10.1002/stc.2332
Chen B, Liu J (2004) Experimental study on AE characteristics of three-point-bending concrete beams. Cement and Concrete Research 34(3):391–397, DOI: https://doi.org/10.1016/j.cemconres.2003.08.021
Chen XD, Liu ZH, Guo SS, Huang YB, Xu WL (2019b) Experimental study on fatigue properties of normal and rubberized self-compacting concrete under bending. Construction and Building Materials 205(30):10–20, DOI: https://doi.org/10.1016/j.conbuildmat.2019.01.207
Chou LH, Lu C-K, Chang J-R, Lee MT (2007) Use of waste rubber as concrete additive. Waste Management & Research 25(1):68–76, DOI: https://doi.org/10.1177/0734242x07067448
Flores-Medina D, Medina NF, Hernández-Olivares F (2014) Static mechanical properties of waste rests of recycled rubber and high quality recycled rubber from crumbed tyres used as aggregate in dry consistency concretes. Materials and Structures 47(7):1185–1193, DOI: https://doi.org/10.1617/s11527-013-0121-6
Ganjian E, Khorami M, Maghsoudi AA (2009) Scrap-tyre-rubber replacement for aggregate and filler in concrete. Construction and Building Materials 23(5):1828–1836, DOI: https://doi.org/10.1016/j.conbuildmat.2008.09.020
Geng J, Sun Q, Zhang Y, Cao L, Zhang W (2017) Studying the dynamic damage failure of concrete based on acoustic emission. Construction and Building Materials 149(15):9–16, DOI: https://doi.org/10.1016/j.conbuildmat.2017.05.054
Gesoglu M, Güneyisi E, Hansu O, İpek S, Asaad DS (2015) Influence of waste rubber utilization on the fracture and steel–concrete bond strength properties of concrete. Construction and Building Materials 101(1):1113–1121, DOI: https://doi.org/10.1016/j.conbuildmat.2015.10.030
Granger S, Loukili A, Pijaudier-Cabot G, Chanvillard G (2007) Experimental characterization of the self-healing of cracks in an ultra high performance cementitious material: Mechanical tests and acoustic emission analysis. Cement and Concrete Research 37(4): 519–527, DOI: https://doi.org/10.1016/j.cemconres.2006.12.005
Gutkin R, Green CJ, Vangrattanachai S, Pinho ST, Robinson P, Curtis PT (2011) On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses. Mechanical Systems and Signal Processing 25(4):1393–1407, DOI: https://doi.org/10.1016/j.ymssp.2010.11.014
Han Q-H, Yang G, Xu J (2018) Experimental study on the relationship between acoustic emission energy and fracture energy of crumb rubber concrete. Structural Control and Health Monitoring 25(10): e2240, DOI: 10.1002/stc.2240
Han QH, Yang G, Xu J, Fu ZW, Lacidogna G, Carpinteri A (2019) Acoustic emission data analyses based on crumb rubber concrete beam bending tests. Engineering Fracture Mechanics 210(1):189–202, DOI: https://doi.org/10.1016/j.engfracmech.2018.05.016
Hernández-Olivares F, Barluenga G, Bollati M, Witoszek B (2002) Static and dynamic behaviour of recycled tyre rubber-filled concrete. Cement and Concrete Research 32(10):1587–1596, DOI: https://doi.org/10.1016/S0008-8846(02)00833-5
Hieu BV, Choi S, Kim YU, Park Y, Jeong T (2011) Wireless transmission of acoustic emission signals for real-time monitoring of leakage in underground pipes. KSCE Journal of Civil Engineering 15(5):805, DOI: https://doi.org/10.1007/s12205-011-0899-0
Hu SW, Lu J, Xiao FP (2013) Evaluation of concrete fracture procedure based on acoustic emission parameters. Construction and Building Materials 47:1249–1256, DOI: https://doi.org/10.1016/j.conbuildmat.2013.06.034
Khatib ZK, Bayomy FM (1999) Rubberized Portland cement concrete. Journal of Materials in Civil Engineering 11(3):206–213, DOI: https://doi.org/10.1061/(ASCE)0899-1561(1999)11:3(206)
Kim JR (2001) Characteristics of crumb rubber modified (CRM) asphalt concrete. KSCE Journal of Civil Engineering 5(6):157–164, DOI: 10.1007/bf02829071
Li D, Zhuge Y, Gravina R, Mills JE (2018) Compressive stress strain behavior of crumb rubber concrete (CRC) and application in reinforced CRC slab. Construction and Building Materials 166(10): 745–759, DOI: https://doi.org/10.1016/j.conbuildmat.2018.01.142
Lv J, Zhou TH, Du Q, Wu HH (2015) Effects of rubber particles on mechanical properties of lightweight aggregate concrete. Construction and Building Materials 91(30):145–149, DOI: https://doi.org/10.1016/j.conbuildmat.2015.05.038
Mahmod HM, Aznieta NF, Gatea SJ (2017) Evaluation of rubberized fibre mortar exposed to elevated temperature using destructive and non-destructive testing. KSCE Journal of Civil Engineering 21(5): 1347–1358, DOI: https://doi.org/10.1007/s12205-016-0721-0
Mardia KV (1970) Measures of multivariate skewness and kurtosis with applications. Biometrika 57(3):519–530, DOI: 10.2307/2334770
Mendis ASM, Al-Deen S, Ashraf M (2017) Effect of rubber particles on the flexural behaviour of reinforced crumbed rubber concrete beams. Construction and Building Materials 54(10):644–657, DOI: https://doi.org/10.1016/j.conbuildmat.2017.07.220
Mendis ASM, Al-Deen S, Ashraf M (2018) Flexural shear behaviour of reinforced crumbed rubber concrete beam. Construction and Building Materials 166(30):779–791, DOI: https://doi.org/10.1016/j.conbuildmat.2018.01.150
Oikonomou N, Mavridou S (2009) Improvement of chloride ion penetration resistance in cement mortars modified with rubber from worn automobile tires. Cement and Concrete Composites 31(1):403–407, DOI: https://doi.org/10.1016/j.cemconcomp.2009.04.004
Ongpeng J, Oreta A, Hirose S (2018) Monitoring damage using acoustic emission source location and computational geometry in reinforced concrete beams. Applied Sciences 8:189–203, DOI: https://doi.org/10.3390/app8020189
Onuaguluchi O, Panesar DK (2014) Hardened properties of concrete mixtures containing pre-coated crumb rubber and silica fume. Journal of Cleaner Production 82(1):125–131, DOI: https://doi.org/10.1016/j.jclepro.2014.06.068
Physical Acoustic Corporation (2005) SAMOS AE system user’s manual (rev. 2). Princeton Junction, Princeton Junction, NJ, USA
Raich AM, Liszkai TR (2011) Multi-objective optimization of sensor and excitation layouts for frequency response function-based structural damage identification. Computer-Aided Civil and Infrastructure Engineering 27(2):95–117, DOI: https://doi.org/10.1111/j.1467-8667.2011.00726.x
Richardson A, Coventry K, Edmondson V, Dias E (2016) Crumb rubber used in concrete to provide freeze–thaw protection (optimal particle size). Journal of Cleaner Production 112(1):599–606, DOI: https://doi.org/10.1016/j.jclepro.2015.08.028
Seo Y, Kim YR (2008) Using acoustic emission to monitor fatigue damage and healing in asphalt concrete. KSCE Journal of Civil Engineering 12(7):237–243, DOI: https://doi.org/10.1007/s12205-008-0237-3
Sukontasukkul P (2009) Use of crumb rubber to improve thermal and sound properties of pre-cast concrete panel. Construction and Building Materials 23(1):1084–1092, DOI: https://doi.org/10.1016/j.conbuildmat.2008.05.021
Wang JY, Guo JY (2016) Damage detection of SFRC concrete beams subjected to pure torsion by integrating acoustic emission and Weibull damage function: Damage detection of SFRC beams by acoustic emission. Structural Control & Health Monitoring 23:51–68, DOI: 10.1002/stc.1753
Wang JY, Guo JY (2018) Damage investigation of ultra high performance concrete under direct tensile test using acoustic emission techniques. Cement and Concrete Composites 88:17–28, DOI: https://doi.org/10.1016/j.cemconcomp.2018.01.007
Xiangqian F, Shaowei H, Jun L, Congjie W (2016) Acoustic emission properties of concrete on dynamic tensile test. Construction and Building Materials 114(1):66–75, DOI: https://doi.org/10.1016/j.conbuildmat.2016.03.065
Xu J, Fu ZW, Han QH, Lacidogna G, Carpinteri A (2017) Micro-cracking monitoring and fracture evaluation for crumb rubber concrete based on acoustic emission techniques. Structural Health Monitoring 17(4):946–958, DOI: https://doi.org/10.1177/1475921717730538
Xu J, Fu ZW, Han QH, Li H (2019) Fracture monitoring and damage pattern recognition for carbon nanotube-crumb rubber mortar using acoustic emission techniques. Structural Control and Health Monitoring 26(10):e2422, DOI: 10.1002/stc.2422
Xu J, Yao Z, Yang G, Han QH (2020) Research on crumb rubber concrete: From a multi-scale review. Construction and Building Materials 232:117282, DOI: https://doi.org/10.1016/j.conbuildmat.2019.117282
Yu L, Wang SY, Lai KK (2008) Neural network-based mean–variance–skewness model for portfolio selection. Computers & Operations Research 35(1):34–46, DOI: https://doi.org/10.1016/j.cor.2006.02.012
Zhu H (2000) New development in crumb rubber research. First International Symposium on Rub be Rized Asphalt Pavement 40(70):78–81
Zhu XY, Chen XD, Liu SS, Li ST, Xuan WH, Chen YZ (2018) Experimental study on flexural fatigue performance of rubberised concrete for pavement. International Journal of Pavement Engineering 1–12, DOI: https://doi.org/10.1080/10298436.2018.1521971
Acknowledgements
This study was funded by the National Key Research and Development Program (SN: 2016YFC0401902). The authors would like to acknowledge the support provided by the National High Level Talent Support Program (Go419001), and the NationalNatural Science Foundation of China (SN: 51579153, 51527811, and 51679150).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ming, P., Lu, J., Cai, X. et al. Analysis of the Crack Evolution Process in Crumb Rubber Concrete Based on Acoustic Emission Technology. KSCE J Civ Eng 24, 2088–2098 (2020). https://doi.org/10.1007/s12205-020-1508-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-020-1508-x