Abstract
Degumming is a surface modification process of natural fibers such as silk. In this paper, the feasibility of degumming of Persian silk by microwave irradiation as an environmentally friendly surface modification technique was investigated. The physical properties of the degummed silk were investigated. The effectiveness of parameters such as microwave irradiation time, surfactant, soap, and degumming time on silk degumming were studied. The evaluation of the data was carried out through the measurement of the weight loss, strength, and elongation of the samples. The scanning electron microscope images were obtained for degummed silk samples. The findings of this research support the potential production of new environmentally friendly textile fibers using microwave irradiation.
Similar content being viewed by others
References
T. Asakura and D. L. Kaplan, “Encyclopaedia of Agricultural Science”, p.1, Academic, New York, Vol.4, 1994.
V. A. Shenai and N. M. Saraf, “Dying of Silk”, 1st ed., p.58 and 90, Sevak: Bombay, 1993.
S. Chopra and M. L. Gulrajani, Ind. J. Fibre Text. Res., 19, 76 (1994).
P. Jiang, H. Liu, C. Wang, L. Wu, J. Huang, and C. Guo, Mater Lett., 60, 919 (2006).
G. Freddi, R. Mossotti, and R. Innocenti, J. Biotechnol., 106, 101 (2003).
N. M. Mahmoodi and M. Arami, J. Photochem. Photobiol. B: Biol., 94, 20 (2009).
N. M. Mahmoodi and M. Arami, Chem. Eng. J., 146, 189 (2009).
N. M. Mahmoodi, M. Arami, and K. Gharanjig, Desalination and Water Treatment, 1, 312 (2009).
N. M. Mahmoodi and M. Arami, J. Appl. Polym. Sci., 109, 4043 (2008).
N. M. Mahmoodi and M. Arami, J. Photochem. Photobiol. A: Chem., 182, 60 (2006).
N. M. Mahmoodi, M. Arami, N. Y. Limaee, and N. S. Tabrizi, J. Colloid Interf. Sci., 295, 159 (2006).
N. M. Mahmoodi, M. Arami, N. Y. Limaee, K. Gharanjig, and F. D. Ardejani, Colloids Surf. A: Physicochem. Eng. Aspects, 290, 125 (2006).
N. M. Mahmoodi, M. Arami, and N. Y. Limaee, J. Hazard. Mater., 133, 113 (2006).
N. M. Mahmoodi, N. Y. Limaee, M. Arami, S. Borhany, and M. Mohammad-Taheri, J. Photochem. Photobiol. A: Chem., 189, 1 (2007).
N. M. Mahmoodi, M. Arami, N. Y. Limaee, and N. S. Tabrizi, Chem. Eng. J., 112, 191 (2005).
M. Arami, N. Y. Limaee, N. M. Mahmoodi, and N. S. Tabrizi, J. Colloid Interf. Sci., 288, 371 (2005).
M. Arami, N. Y. Limaee, N. M. Mahmoodi, and N. S. Tabrizi, J. Hazard. Mater., 135, 171 (2006).
M. Arami, N. Y. Limaee, and N. M. Mahmoodi, Chemosphere, 65, 1999 (2006).
M. Arami, N. Y. Limaee, and N. M. Mahmoodi, Chem. Eng. J., 139, 2 (2008).
G. Nalankilli, Ind. Text. J., 103, 110 (1992).
S. R. Karmakar, “Chemical Technology in the Pre-Treatment Process of Textiles”, Elsevier, New York, 1999.
F. Sadov, M. Korchagin, and A. Matetsky, “Chemical Technology of Fibrous Materials”, Mir, Moscow, p.97, 1973.
M. L. Gulrajani, S. Das, and S. Sethi, Ind. J. Fibre Text. Res., 15, 173 (1990).
S. R. Shukla, R. S. Patel, and A. N. Saligram, Am. Dyestuff. Rep., 81, 22 (1992).
A. Hou, X. Wang, and L. Wu, Carbohydr. Polym., 74, 934 (2008).
M. Arami, S. Rahimi, L. Mivehie, F. Mazaheri, and N. M. Mahmoodi, J. Appl. Polym. Sci., 106, 267 (2007).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mahmoodi, N.M., Moghimi, F., Arami, M. et al. Silk degumming using microwave irradiation as an environmentally friendly surface modification method. Fibers Polym 11, 234–240 (2010). https://doi.org/10.1007/s12221-010-0234-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-010-0234-2