Abstract
The research on coir-polyester composites initiated the interest in the development of woven coir fiber-reinforced polyester composites. The mechanical properties of woven coir-polyester composites were evaluated as per ASTM standards and the machinability behavior was studied by conducting drilling tests in this investigation. The woven coir-polyester composites exhibited the average values of tensile, flexural and impact strength of 19.9 MPa, 31.3 MPa and 49.9 kJ/m2 respectively. The effect of NaOH treatment on the improvement of mechanical properties of woven coir-polyester composites were studied in this investigation. The 40 % increase of tensile strength, 42 % increase of flexural strength and 20 % increase of impact strength were achieved by treated woven coir fiber-reinforced polyester composites. The regression models for predicting thrust force, torque and tool wear in drilling of woven coir-polyester composites were developed and the effect of drilling parameters were analyzed.
Similar content being viewed by others
References
K. G. Satyanarayana, C. K. S. Pillai, K. Sukumaran, and S. G. K. Pillai, J. Mater. Sci., 17, 2453 (1982).
P. S. Mukherjee and K. Satyanarayana, J. Mater. Sci., 19, 925 (1984).
K. G. Satyanarayana, K. Sukumaran, R. S. Mukherjee, C. Pavithran, and S. G. K. Pillai, Cement Concrete Compos., 12, 117 (1990).
C. Fernandez, Coir News, 32, 6 (2003).
S. N. Monteiro, L. A. H. Terrones, and J. R. M. D’Almeida, Polym. Testing, 27, 591 (2008).
S. Harish, D. P. Michael, A. Bensely, D. Mohan Lal, and A. Rajadurai, Mater. Characterization, 60, 44 (2009).
S. Biswas, S. Kindo, and A. Patnaik, Fiber. Polym., 12, 73 (2011).
J. Yao, Y. C. Hu, W. Lu, and J. Li, Adv. Mater. Res., 217, 852 (2011).
S. V. Prasad, C. Pavithran, and P. K. Rohatgi, J. Mater. Sci., 18, 1443 (1993).
J. Rout, M. Misra, A. K. Mohanty, S. K. Nayak, and S. S. Tripathy, Compos. Sci. Technol., 61, 303 (2001).
Godfrey C. Onwubolu and S. Kumar, J. Mater. Proc. Technol., 171, 41 (2006).
S. Jayabal and U. Natarajan, Int. J. Adv. Manufacturing Technol., 54, 639 (2011).
S. Jayabal and U. Natarajan, J. Metallurgy Mater. Sci., 52, 341 (2010).
S. Jayabal and U. Natarajan, Int. J. Adv. Manufacturing Technol., 51, 371 (2010).
S. Jayabal, U. Natarajan and U. Sekar, Int. J. Adv. Manufacturing Technol., 55, 263 (2011).
S. Jayabal and U. Natarajan, Int. J. Machining Machinabil. Mater., 9, 149 (2011).
S. Jayabal and U. Natarajan, J. Scientific Ind. Res., 69, 741 (2010).
S. Jayabal and U. Natarajan, Indian J. Eng. Mater. Sci., 17, 463 (2010).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jayabal, S., Velumani, S., Navaneethakrishnan, P. et al. Mechanical and machinability behaviors of woven coir fiber-reinforced polyester composite. Fibers Polym 14, 1505–1514 (2013). https://doi.org/10.1007/s12221-013-1505-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-013-1505-5