Abstract
This research suggests a new disk brake design using circumferential friction on the disk of a front-wheel-drive passenger car. The paper compares mechanical performance between the conventional and suggested disk brakes under dynamic braking conditions. Thermoelastic instability is considered in simulation of the test condition. An optimization technique using a metamodel is introduced to minimize the weight of the suggested disk brake. To achieve this goal, the response defined in the optimization formulation is expressed in a mathematically explicit form with respect to the design variables by using a kriging surrogate model, resulting in a simple optimization problem. Then, the simulated annealing algorithm is utilized to find the global optimum. The design results obtained by the kriging method are compared with those obtained from ANSYS analysis.
Similar content being viewed by others
References
Ansys, Inc. (2007). ANSYS Release 11.0 Documentation for ANSYS (on-line help).
Cho, H. J., Kim, M. G. and Cho, C. D. (2007). A study of frictional contact vibration influence on hot spot in automotive disk brake. Trans. Korean Society of Automotive Engineers 15,1, 154–161.
Choi, J. H. and Lee, I. (2003). Finite element analysis of transient thermoelastic behaviors in disk brakes. Wear 257,1/2, 47–58.
Chung, C. S., Choi, M. I., Lee, Y. I. and Kim, H. K. (2005). A study on thermal cracking of ventilated brake disk of a car using FEM analysis. J. Korean Society of Tribologists and Lubrication Engineers 21,2, 63–70.
Fang, K. T., Li, R. and Sudjianto (2006) Design and Modeling for Computer Experiments. Chapman & Hall/CRC. New York.
Guinta, A. and Watson, L. (1998). A comparison of approximation modeling techniques: polynomial versus interpolating models. Proc. 7th AIAA/USAF/NASA/ISSMO Symp. Multidisciplinary Analysis and Optimization, St. Louis, MO, AIAA, 2, 392–440 (AIAA-98-4758).
Hwang, I. J. and Park, G. J. (2005). System mode and sensitivity analysis for brake judder reduction. Trans. Korean Society of Automotive Engineers 13,6, 142–153.
Hwang, J. H., Kim, H. S., Choi, Y., Im, B. S. and Kang, K. W. (2005). The thermal analysis of brake disc 3-D coupled analysis. Key Eng. Materials, 297/300,1, 305–310.
Jung, S. P., Jun, K. J., Park, T. W. and Yoon, J. H. (2008). Development of the brake system design program for a vehicle. Int. J. Automotive Technology 9,1, 45–51.
Kao, T. K., Richmond, J. W. and Douarre, A. (2000). Brake disc hot spotting and thermal judder; an experimental and finite element study. Int. J. Vehicle Design 23,3/4, 276–296.
Koji, N., Yasuhiro, N. and Noriyuki, S. (2004). Development of a disc for reducing brake judder. Proc. Japan Society of Automotive Engineers Annual Cong. 101,4, 23–26.
Lee, K. H. and Kang, D. H. (2007). Structural optimization of an automotive door using the kgiging interpolation method. Proc. IMechE, Part D: J. Automobile Eng 221,12, 1525–1534.
Lee, K. J. and Brooks, F. Q. Jr. (2003). Hot spottong and judder phenomena in aluminum drum brakes. Trans. ASME (J. Tribology) 125,1, 4.
Lee, S. K., Sung, B. Y. and Ha, S. K. (2000). Optimal design of ventilated disc brake rotor. Trans. Korean Society of Mechanical Engineers A(in Korean) 24,3, 593–602.
Lee, T. H., Lee, K. K. and Jung, S. J. (2001). Optimal design for the thermal deformation of disk brake by using design of experiments and finite element analysis. Trans. Korean Society of Mechanical Engineers A (in Korean) 25,12, 1960–1965.
Oscar, A., Enrique, A., Rafael, A. and Alfonso, H. (2002). Judder vibration in disc brakes excited by thermoelastic instability. Eng. Computations 19,4, 411–430.
Sherwood, G. (2006) On the construction of orthogonal arrays and covering arrays using permutation groups. http://home.att.net/~gsherwood/cover.htm.
Taesung S&E, Inc. (2006). ANSYS Heat Transfer Analysis. Seoul. Korea.
Zhong, Z. H. (1993). Finite Element Procedures for Contact-impact Problems. Oxford University Press. USA.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Song, B.C., Lee, K.H. Structural optimization of a circumferential friction disk brake with consideration of thermoelastic instability. Int.J Automot. Technol. 10, 321–328 (2009). https://doi.org/10.1007/s12239-009-0037-x
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-009-0037-x