Skip to main content
Log in

Mining-induced stress changes and rock burst control in a variable-thickness coal seam

  • Original Paper
  • Published:
Arabian Journal of Geosciences Aims and scope Submit manuscript

Abstract

In longwall mining, one of the factors most influencing safety in underground coal mining is the stress change, especially when such work is carried out within the thickness variation of a coal seam. This paper analyses the special case of a coal seam which suffers significant overstress as a result of variations in the geometry and dimension of the load itself, in particular, thinning. This is because such thickening and thinning locations of the thickness are generally areas where rock bursts occur most frequently. The results of the research were validated by measuring the stress state in the area under study. A numerical model was established using FLAC3D to understand the results of the field tests and map the zones in the model with a high risk of rock burst. The results of field tests, and the numerical modelling, show that thinning accentuates the stress concentration and energy accumulation. Furthermore, on the basis of a retrospective analysis of what was observed in a coal mine, some preventative measures were instigated as rock burst controls. Also, it was found that rock burst occurrence can be effectively reduced by the use of large-diameter drilling and break-tip blasting.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18

Similar content being viewed by others

References

  • Álvarez-Fernández MI, González-Nicieza C, Álvarez-Vigil AE, Herrera-García G, Torno S (2009) Numerical modelling and analysis of the influence of local variation in the thickness of a coal seam on surrounding stresses: application to a practical case. Int J Coal Geol 79:157–166

    Article  Google Scholar 

  • Atsushi S, Hani SM (2014) Dynamic behavior of mining-induced fault slip. Int J Rock Mech Min Sci 66:19–29

    Google Scholar 

  • Brady BHG, Brown ET (2006) Rock mechanics: for underground mining, 3rd edn. Springer, Netherlands

  • Chen F, Pan YS, Li ZH, Wang AW, Xu LM (2013) Analysis and evaluation of effects of borehole pressure relief measures by drilling cutting method. Chin J Geo Eng 35(S2):266–270(in Chinese)

    Google Scholar 

  • Coggen J, Gao F, Stead D, Elmo D (2012) Numerical modelling of the effects of weak immediate roof lithology on coal mine roadway stability. Int J Coal Geol 90-91:100–109

    Article  Google Scholar 

  • Dou LM, He XQ (2001) Theory and technology of rock burst prevention. China University of Mining and Technology Press, Xuzhou(in Chinese)

    Google Scholar 

  • Dou LM, He Y, Zhang WD (2003) Hazards of rock burst in island coal face and its control. Chin J Rock Mech Eng 22(11):1866–1869(in Chinese)

    Google Scholar 

  • Dou LM, Zhao CG, Yang SG, Wu XR (2006) Prevention and control of rock burst in coal mine. China University of Mining and Technology Press, Xuzhou(in Chinese)

    Google Scholar 

  • Gao MT, Wang YY (2011) Study and application on the technology of using the blasting to break roof to control rock burst. J China Coal Soc 36(S2):326–331

    Google Scholar 

  • He J, Dou LM (2012) Gradient principle of horizontal stress inducing rock burst in a coal mine. J Cent South Univ 19:2926–2932

    Article  Google Scholar 

  • He Y, Cai QX, Dou LM (2003) Hazards of rock burst in island coal face and its control in coal mine jining No. 2. Rock Soil Mech 24:593–596(in Chinese)

    Google Scholar 

  • He H, Dou LM, Gong SY, Zhou P, Xue ZJ, Jiang H (2011) Study of mining shock in high tectonic stress zones. J China U Min Techno 40(1):7–13(in Chinese)

    Google Scholar 

  • Itasca Consulting Group Inc (2012) FLAC3D Fast Lagrangian Analysis of Continua in 3 Dimensions user’s guide Minneapolis: Itasca

  • Jiang FX, Yang SH, Cheng YH, Zhang XM, Mao ZY, Xu FJ (2006) A study on microseismic monitoring of rock burst in coal mine. Chinese J Geophys 49(5):1511–1516(in Chinese)

    Article  Google Scholar 

  • Jiang YD, Wang HW, Xue S, Zhao YX, Zhu J, Pang XF (2012) Assessment and mitigation of coal bump risk during extraction of an island longwall panel. Int J Coal Geol 95:20–33

    Article  Google Scholar 

  • Kaiser PK, Yazici S, Maloney S (2001) Mining-induced stress change and consequences of stress path on excavation stability—a case study. Int J Rock Mech Min 38:167–180

    Article  Google Scholar 

  • Kelly M, Luo X, Craig S (2002) Integrating tools for longwall geomechanics. Int J Rock Mech Min 39(5):661–676

    Article  Google Scholar 

  • Luo JA (2013) Research on the mechanism of rock burst in coal roadway under extremely thick igneous rocks and control techniques. PhD thesis, China University of Mining and Technology, Xuzhou, p. 8(in Chinese)

    Google Scholar 

  • Mark C, Gale W, Oyler D, Chen J (2007) Case history of the response of a longwall entry subjected to concentrated horizontal stress. Int J Rock Mech Min 44:210–221

    Article  Google Scholar 

  • Orlecka-Sikora B, Lasocki S, Lizurek G, Rudziński Ł (2012) Response of seismic activity in mines to the stress changes due to mining induced strong seismic events. Int J Rock Mech Min 53:151–158

    Article  Google Scholar 

  • Peng SP, Zou GG, Li QL (2008) Seam thickness prediction methods based on the logging constrained seismic inversion. J China U Min Technol 37(6):729–733(in Chinese)

    Google Scholar 

  • Qi QX, Lei Y, Li HY, Ji ZW, Liu J, Pan JF, Wang YX (2007) Theory and application of prevention of rock burst by break-tip blast in deep hole. Chin J Rock Mech Eng 26(S2):3522–3527

    Google Scholar 

  • Qu XC, Yiang FX, Yu ZX, Ju HY (2011) Rock burst monitoring and precaution technology based on equivalent drilling research and its applications. Chin J Rock Mech Eng 30(11):2346–2351(in Chinese)

    Google Scholar 

  • Shabanimashcool M, Li CC (2013) A numerical study of stress changes in barrier pillars and a border area in a longwall coal mine. Int J Coal Geol 106:39–47

    Article  Google Scholar 

  • Sun ZW (2003) Numerical simulation on stress field distribution in partial transformation area of coal seam height. J Min Saf Eng 3:95–97(in Chinese)

    Google Scholar 

  • Yang W, Lin BQ, Qing Y, Cheng Z (2014) Stress redistribution of longwall mining stope and gas control of multi-layer coal seams. Int J Rock Mech Min 72:8–15

    Google Scholar 

  • Zhang MW, Shimada H, Sasaoka T, Matsui K, Dou LM (2013) Seismic energy distribution and hazard assessment in underground coal mines using statistical energy analysis. Int J Rock Mech Min 64:192–200

    Google Scholar 

Download references

Acknowledgment

This work was supported and financed by the Key Research Development Programme of Jiangsu Province (Grant no. BE2015040), the National Natural Science Foundation of China and the Shenhua Group Corporation Limited (Grant no. 51174285), the Fundamental Research Funds for the Central Universities (Grant no. 2014XT01) and the Priority Academic Programme for Development of Jiangsu Higher Education Institutions (Grant no. SZBF2011-6-B35).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Lin-ming Dou.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhu, Ga., Dou, Lm., Li, Zl. et al. Mining-induced stress changes and rock burst control in a variable-thickness coal seam. Arab J Geosci 9, 365 (2016). https://doi.org/10.1007/s12517-016-2356-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s12517-016-2356-3

Keywords

Navigation