Abstract
Effects of cold rolling on the microstructure and mechanical properties of Fe-Ni-Mn-Mo-Ti-Cr maraging steels were studied. To investigate the microstructure and mechanical properties, optical microscopy, scanning electron microscopy, X-ray diffraction, tensile test, and hardness test were used. The results show that the solution-annealing treatment in the cold-rolled steel redounds to the formation of submicrocrystalline Fe2(Mo, Ti) Laves phase particles, which are stable at high temperatures. These secondary Laves phase particles prevent from recrystallization at high temperatures and correspond to semi-brittle fracture in the subsequent aging treatment.
Similar content being viewed by others
References
A.M. Hall and C.J. Slunder, The metallurgy, behavior and application of the 18-percent nickel maraging steels, [in] NASA-SP-5051, NASA, Washington D.C., 1968, p.137.
K. Rohrbach and M. Schmidt, ASM Metals Handbook, ASM International, Materials Park, OH, 1991, p.219.
Y. Katz, H. Mathias, and S. Nadiv, The mechanical stability of austenite in maraging steels, Metall. Mater. Trans. A, 14(1983), p.801.
S. Floreen and A.M. Bayer, Development and commercialization of cobalt-free maraging steels, [in] Maraging Steels: Conference; Recent Developments and Applications, Phoenix, USA, 1988, p.39.
M. Tanaka, T. Suzuki, and M. Yodogawa, On the age hardening of Fe-Ni-Mn martensitic alloys, J. Jpn. Inst. Met., 31(1967), No.82, p.1075.
S.H. Mun, M. Watanabe, D.B. Williams, et al., Precipitation of austenite particles at grain-boundaries during aging of Fe-Ni-Mn steel, Metall. Mater. Trans. A, 33(2002), p.1057.
D.R. Squires and E.A. Wilson, Aging and brittleness in an Fe-Ni-Mn alloy, Metall. Trans., 3(1972), p.575.
N.H. Heo, Ductile-brittle-ductile transition and grain boundary segregation of Mn and Ni in an Fe-6Mn-12Ni alloy, Scripta Mater., 34(1996), p.1517.
H.C. Lee, S.H. Mun, and D. McKenzie, Electron microscopy study on the grain boundary precipitation during aging of Fe-10Ni-5Mn steel, Metall. Mater. Trans. A, 34(2003), p.2421.
N.H. Heo, Effect of nonequilibrium grain boundary segregation of alloying elements on mechanical properties in Fe-5Mn-9Ni-5Mo alloy, Mater. Trans. JIM, 37(1996), No.1, p.56.
S.J. Kim and C.M. Wayman, Strengthening behaviour and embrittlement phenomena in Fe-Ni-Mn-Ti maraging alloys, Mater. Sci. Eng. A, 207(1996), p.22.
N.H. Heo and H.C. Lee, Effect of tungsten addition on the ductile-brittle-ductile transition in Fe-7Ni-8Mn-W maraging steels, Scripta Metall. Mater., 33(1995), p.2031.
D.H. Seo, N.H. Heo, and H.C. Lee, Grain boundary segregation and fracture behavior of boron containing Fe Mn-Ni-(Mo,W) age hardening alloys, Met. Mater. Int., 3(1997), p.245.
N.H. Heo and H.C. Lee, Role of chromium on mechanical properties of Fe-Mn Ni-Mo-Ti maraging steels, Met. Mater. Int., 1(1995), p.77.
S. Hossein Nedjad, M. Nili Ahmadabadi, and T. Furuhara, Transmission electron microscopy study on the grain boundary precipitation of an Fe-Ni-Mn maraging steel, Metall. Mater. Trans. A, 39(2008), p.19.
S. Hossein Nedjad, M.R. Movaghar Garabagh, M. Nili Ahmadabadi, and H. Shirazi, Effect of further alloying on the microstructure and mechanical properties of an Fe-10Ni-5Mn maraging steel, Mater. Sci. Eng. A, 473(2008), p.249.
S. Hossein Nedjad, S. Meimandi, A. Mahmudi, et al., Effect of aging on the microstructure and tensile properties of Fe-Ni-Mn-Cr maraging alloys, Mater. Sci. Eng. A, 501(2009), p.182.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mahmudi, A., Nedjad, S.H. & Behnam, M.M.J. Effects of cold rolling on the microstructure and mechanical properties of Fe-Ni-Mn-Mo-Ti-Cr maraging steels. Int J Miner Metall Mater 18, 557–561 (2011). https://doi.org/10.1007/s12613-011-0477-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-011-0477-y