Abstract
The calibration of resistances was being performed manually at National Institute of Standards (NIS), Egypt till now. In this paper, a fully automated system for the remote calibrations of resistances is described. This sytem is mainly used for routine calibrations for low precision calibrations. The calibration of many resistors can be performed in this system automatically through the Resistors Automatic Changer which is controlled by a LabVIEW program developed and described in the present research work. Not only these calibrations of resistances are performed automatically but are also controlled remotely via an internet connection. Some simple remote and automated resistance measurements are carried out just to confirm our new measuring system.
Similar content being viewed by others
References
C. Cassiago, L. CaIIegarol and G. La Paglia, Internet Calibration for Electrical Metrology: First Application at IEN, IEEE Instrumentation and Measurement Technology Conference (IMTC), Como, Italy, (2004) pp. 102–105.
Instrument-grade Data Acquisition with Ethernet Brings Precision Measurement and Control to Networks, Keithley Instruments, Inc., Printed in the U.S.A, Copyright, (2001).
P. J. Moore, D. L. Hickery and M.G.G. Urbaneja Remote Sensing of Voltage Using Optical Assessment of Corona, IEEE Power Engineering Society Summer Meeting, 2 (2000) 1164–1159.
National Instruments “Lab-VIEW Website:http://www.ni.com/Lab-VIEW/optin/ ”.
National Instruments Tutorial, “Remote Panels in Lab-VIEW — Distributed Application Development”, September, (2006). URL:http://zone.ni.com/devzone/cda/tut/p/id/4791.
Fluke Corporation 2002–2006, “Users Manual”, Digital Reference Multimeter, Type 8508A, Manual Part Number 1673798, Rev., 3 (2002) 3/06.
The Expression of Uncertainty and Confidence in Measurement, United Kingdom Accreditation Service (UKAS), M 3003 Edition 2 (2007).
M.H.A. Raouf, Manual/Automated Capacitance Box Using Micro-Controller Technique, MAPAN-Journal of Metrology Society of India, 26 (2011) 105–113.
S.K. Jaiswal, Complete Characterization of a Low Thermal Scanner for Automatic Voltage Measurement, MAPAN-Journal of Metrology Society of India, 23 (2008) 31–38.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Raouf, M.H.A., Ali, R.S.M. & Gadelrab, M.S. Construction and remote calibration of an automated resistance measuring system. MAPAN 26, 125–131 (2011). https://doi.org/10.1007/s12647-011-0013-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12647-011-0013-6