Abstract
The present work investigates the microstructure and mechanical properties of alloy C-276 fabricated by continuous and pulsed current gas tungsten arc welding process and by employing ER2553 filler wire. Optical and scanning electron microscopic analyses were carried out to study the microstructures of weldments produced. Energy dispersive X-ray spectroscopy (EDS) was performed to investigate the formation of secondary phases in the weldments. The results disclosed that pulsed current gas tungsten arc welding showed refined microstructure compared to continuous current gas tungsten arc welding. SEM/EDS analysis revealed the segregation of Mo in the weld interface regions in both the welding techniques. The extent of microsegregation reduced the strength and toughness of the weld joint compared to the base metal. Bend test revealed cracks in the weld interface region in both the weldments.
Similar content being viewed by others
References
Cieslak M J, Headley T J and Romig A D, Jr. Metall Trans A 17A (1986) 2035.
Hashim M, Babu S R K E, Duraiselvam M and Natu H, Mater Des 46(2013) 546.
Cieslak M J, Knorovsky G A, Headley T J and Romig AD, Jr. Metall Trans 17A (1986) 2107.
Raghavan M, Berkowitz BJ and Scanlon J C, Metall Trans 13A (1982) 979.
Akhter J I, Shaikh M A, Ahmad M, Iqbal M, Shoaib K A and Ahmad W J, Mater Sci Lett 20(2001)333.
Tawancy H M, J Mater Sci 16(1981) 2883.
Manikandan M, Arivazhagan N, Nageswara Rao M, and Reddy G M. J Manuf Process 16 (2014)16 563.
Manikandan M, Arivazhagan N, Nageswara Rao M, and Reddy G M, Acta Metall Sinica (English Letters) 28 (2015) 208.
Manikandan M, Hari P R, Vishnu G, Arivarasu M, Devendranath Ramkumar K, Arivazhagan N, Nageswara Rao M, and Reddy G M, Procedia Mater Sci 5 (2014) 2233.
Guangyi M A, Dongjiang W U and Dongming G U O, Mater Trans A A42(2011)3853.
Radhakrishna C H, Prasad Rao K and Srinivas S, J Mater Sci Lett 14(1995)1810.
Farahani E, Shamanian M and Ashrafizadeh F, AMAE Int J Manuf Mater Sci 02 (2012)1.
Kotecki D J and Lippold J C, Welding metallurgy and weldability of stainless steels, John Wiley & Sons, New Jersey (2005).
Liou H Y, Hsieh R I and Tsai W T, Corros Sci 44 (2002) 2841.
Wang H S, Mater Trans JIM 46 (2005) 593.
Chen L, Tan H, Wang Z, Li J and Jiang Y, Corros Sci 58 (2012) 168.
Bravo I M, Zepeda C M, Hernandez A A and Piedras E R, Engineering 2 (2010) 520.
Kou S. Welding Metallurgy, John Wiley & Sons, New Jersey (2003).
Kurz W and Fisher DJ, Fundamentals of Solidification. Trans Tech. Publishing, Aedermannsdort (1989).
Yang Y, Yan B, Li J and Wang J, Corros Sci 53 (2011)3756.
Sireeshaa M, Shankar V, Shaju K. Albert and Sundaresan S, Mater Sci Eng A A292 (2009) 74.
DuPont J N, Lippold J C, and Kiser S D, Welding Metallurgy and Weldability of Nickel-Base alloys, John Wiley & Sons, New Jersey (1999).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Manikandan, M., Arivazhagan, N., Arivarasu, M. et al. Analysis of Metallurgical and Mechanical Properties of Continuous and Pulsed Current Gas Tungsten Arc Welded Alloy C-276 with Duplex Stainless Steel. Trans Indian Inst Met 70, 661–669 (2017). https://doi.org/10.1007/s12666-017-1045-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-017-1045-6