Abstract
There has not been extensive research into the subjects of the interfacial bonding quality and the interaction mechanisms of biopolymers and natural fibres. Attempts have been made to incorporate natural fibres/fillers (biofibres) into the manufacture of composites in order to increase the functionality and performance of biopolymers synthesised from natural sources/microbial systems. However, the interfacial bonding quality and other substantial technical challenges still need to be addressed if their industrial use is to be realized. The interfacial bonding quality ultimately dictates the mechanical and physical performance of bio-composites. This review paper attempts to collate the state-of-the-art regarding coupling agents/additives and their roles in interaction mechanisms with biofibres and biopolymers. Two potential pathways for narrowing the performance gap between biopolymer-based bio-composites and their petroleum-based counterparts are: i) improving the interfacial bonding quality by the synthesis of a specific coupling agent, and ii) improving the processability of bio-composites by blending two or more biopolymers.
Similar content being viewed by others
References
E. Bodros, I. Pillin, N. Montrelay, and C. Baley, Compos. Sci. Technol., 67, 462 (2007).
B. Imre and B. Pukánszky, Eur. Polym. J., 49, 1215 (2013).
A. Le Duigou, P. Davies, and C. Baley, Compos. Sci. Technol., 70, 231 (2010).
A. K. Mohanty, M. Misra, and G. Hinrichsen, Macromol. Mater. Eng., 276-277, 1 (2000).
G. E. Luckachan and C. K. S. Pillai, J. Polym. Environ., 19, 637 (2011).
M. Jamshidian, E. A. Tehrany, M. Imran, M. Jacquot, and S. Desobry, Compr. Rev. Food. Sci. Food. Saf., 9, 552 (2010).
V. H. Sangeetha, H. Deka, T. O. Varghese, and S. K. Nayak, Polym. Compos., 39, 81 (2018).
C. Bianca, P. S. Tommy, R. Maria, S. Barbara, and A. Fabrizio, Bioresour. Technol., 218, 692 (2016).
M. P. Arrieta, J. López, S. Ferrándiz, and M. A. Peltzer, Polym. Test., 32, 760 (2013).
B. Y. Shin, S. H. Jang, and B. S. Kim, Polym. Eng. Sci., 51, 826 (2011).
Y. Tokiwa, B. P. Calabia, C. U. Ugwu, and S. Aiba., Int. J. Mol. Sci., 10, 3722 (2009).
H. P. S. Abdul Khalil, Y. Davoudpour, M. N. Islam, A. Mustapha, K. Sudesh, R. Dungani, and M. Jawaid, Carbohydr. Polym., 99, 649 (2014).
T. Huber, J. Müssig, O. Curnow, S. Pang, S. Bickerton, and M. P. Staiger, J. Mater. Sci., 47, 1171 (2012).
R. Jonas and L. F. Farah, Polym. Degrad. Stab., 59, 101 (1998).
M. Darder, P. Aranda, and E. Ruiz-Hitzky, Adv. Mater., 19, 1309 (2007).
S. J. Eichhorn, A. Dufresne, M. Aranguren, N. E. Marcovich, J. R. Capadona, S. J. Rowan, C. Weder, W. Thielemans, M. Roman, S. Renneckar, W. Gindl, S. Veigel, J. Keckes, H. Yano, K. Abe, M. Nogi, A. N. Nakagaito, A. Mangalam, J. Simonsen, A. S. Benight, A. Bismarck, L. A. Berglund, and T. Peijs, J. Mater. Sci., 45, 1 (2010).
J. J. Kester and O. R. Fennema, Edible films and coatings: a review, Food Technol., 1986.
R. Pareta and M. J. Edirisinghe, Carbohydr Polym., 63, 425 (2006).
L. Amagliani, J. O’Regan, A. L. Kelly, and J. A. O’Mahony, J. Cereal. Sci., 70, 291 (2016).
H. Angellier, S. Molina-Boisseau, P. Dole, and A. Dufresne, Biomacromolecules, 7, 531 (2006).
S. Zhang, X. Feng, S. Zhu, Q. Huan, K. Han, Y. Ma, and M. Yu, Mater. Lett., 98, 238 (2013).
M. Akrami, I. Ghasemi, H. Azizi, M. Karrabi, and M. Seyedabadi, Carbohydr. Polym., 144, 254 (2016).
J. F. Mano, D. Koniarova, and R. L. Reis, J. Mater. Sci. Mater. Med., 14, 127 (2003).
C. S. Ha and W. J. Cho, Prog. Polym. Sci., 27, 759 (2002).
C. Santulli, in Advanced High Strength Natural Fibre Composites in Construction, Elsevier; 2017, pp 459–477.
B.-S. Chiou, E. Yee, G. M. Glenn, and W. J. Orts, Carbohydr. Polym., 59, 467 (2005).
H. Liu, F. Xie, L. Yu, L. Chen, and L. Li, Prog. Polym. Sci., 34, 1348 (2009).
S. H. Ghaffar and M. Fan, Biomass Bioenergy, 57, 264 (2013).
A. Duval and M. Lawoko, React. Funct. Polym., 85, 78 (2014).
M. Norgren and H. Edlund, Curr. Opin. Colloid Interface Sci., 19, 409 (2014).
A. J. Ragauskas, G. T. Beckham, M. J. Biddy, R. Chandra, F. Chen, M. F. Davis, B. H. Davison, R. A. Dixon, P. Gilna, M. Keller, P. Langan, A. K. Naskar, J. N. Saddler, T. J. Tschaplinski, G. A. Tuskan, and C. E. Wyman, Science, 344, 1246843 (2014).
D. Kun and B. Pukánszky, Eur. Polym. J., 93, 618 (2017).
D. Stewart, Ind. Crops. Prod., 27, 202 (2008).
S. H. Ghaffar and M. Fan, Int. J. Adhes. Adhes., 48, 92 (2014).
Y. L. Chung, J. V. Olsson, R. J. Li, C. W. Frank, R. M. Waymouth, S. L. Billington, and E. S. Sattely, ACS Sustain. Chem. Eng., 1, 1231 (2013).
C. Zhang, T. F. Garrison, S. A. Madbouly, and M. R. Kessler, Prog. Polym. Sci., 71, 91 (2017).
F. S. Güner, Y. Yagci, and A. T. Erciyes, Prog. Polym. Sci., 31, 633 (2006).
V. Sharma and P. P. Kundu, Prog. Polym. Sci., 31, 983 (2006).
L. M. De Espinosa and M. A. R. Meier, Eur. Polym. J., 47, 837 (2011).
V. M. Wikm, M. I. Aranguren, and M. A. Mosiewicki, Polym. Eng. Sci., 51, 1389 (2011).
Z. Liu, S. Z. Erhan, and J. Xu, Polymer (Guildf), 46, 10119 (2005).
M. Desroches, M. Escouvois, R. Auvergne, S. Caillol, and B. Boutevin, Polym. Rev., 52, 38 (2012).
J. Datta and E. Glowinska, J. Elastom. Plast., 46, 33 (2014).
F. Stempfle, D. Quinzler, I. Heckler, and S. Mecking, Macromolecules, 44, 4159 (2011).
F. Pardal, S. Salhi, B. Rousseau, M. Tessier, S. Claude, and A. Fradet, Macromol. Chem. Phys., 209, 64 (2008).
F. Stempfle, P. Ortmann, and S. Mecking, Macromol. Rapid Commun., 34, 47 (2013).
P. M. Visakh and M. J. M. Morlanes, Polyethylene-Based Blends, Composites and Nanocomposities, John Wiley & Sons, Inc., 2015.
P. Suriyamongkol, R. Weselake, S. Narine, M. Moloney, and S. Shah, Biotechnol. Adv., 25, 148 (2007).
J. M. Luengo, B. García, A. Sandoval, G. Naharro, and E. R. Olivera, Curr. Opin. Microbiol., 6, 251 (2003).
W. J. Page, J. Manchak, and B. Rudy, Appl. Environ. Microbiol., 58, 2866 (1992).
Y. Jiang, X. Songx L. Gong, P. Li, C. Dai, and W. Shao, Enzyme Microb. Technol., 42, 167 (2008).
R. Haas, B. Jin, and F. T. Zepf, Biosci. Biotechnol. Biochem., 72, 253 (2014).
J. M. B. T. Cavalheiro, M. C. M. D. de Almeida, C. Grandfils, and M. M. R. da Fonseca, Process Biochem., 44, 509 (2009).
M. Koller, R. Bona, G. Braunegg, C. Hermann, P. Horvat, M. Kroutil, J. Martinz, J. Neto, L. Pereira, and P. Varila, Biomacromolecules, 6, 561 (2005).
W. S. Ahn, S. J. Park, and S. Y. Lee, Environ. Microbiol., 66, 3624 (2000).
S. Kulpreecha, A. Boonruangthavorn, B. Meksiriporn, and N. Thongchul, J. Biosci. Bioeng., 107, 240 (2009).
J. I. Choi and S. Y. Lee, Bioprocess Eng., 17, 335 (1997).
D. Choi, D. C. Chipman, S. C. Bents, and R. C. Brown, Appl. Biochem. Biotechnol., 160, 1032 (2010).
S. Bengtsson, A. R. Pisco, P. Johansson, P. C. Lemos, and M. A. M. Reis, J. Biotechnol., 147, 172 (2010).
S. Khanna and A. K. Srivastava, Process Biochem., 40, 607 (2005).
C. S. Reddy, R. Ghai, and V. Kalia, Bioresour. Technol., 87, 137 (2003).
K. Van De Velde and P. Kiekens, Polym. Test., 21, 433 (2002).
M. Avella, E. Martuscelli, and M. Raimo, J. Mater. Sci., 35, 523 (2000).
H. Zhao, Z. Cui, X. Wang, L. S. Turng, and X. Peng, Compos. Part B: Eng., 51, 79 (2013).
S. Ummartyotin and H. Manuspiya, Renew. Sustain Energy Rev., 41, 402 (2015).
E. Castro-Aguirre, F. Iñiguez-Franco, H. Samsudin, X. Fang, and R. Auras, Adv. Drug Deliv. Rev., 107, 333 (2016).
Y. Wang, Y. Weng, and L. Wang, Polym. Test., 36, 119 (2014).
M. Nofar, A. Tabatabaei, H. Sojoudiasli, C. B. Park, P. J. Carreau, M.-C. Heuzey, and M. R. Kamal, Eur. Polym. J., 90, 231 (2017).
K. V. Harish Prashanth and R. N. Tharanathan, Trends Food Sci. Technol., 18, 117 (2007).
C. K. S. Pillai, W. Paul, and C. P. Sharma, Prog. Polym. Sci., 34, 641 (2009).
K. Kurita, Mar. Biotechnol., 8, 203 (2006).
N. M. Julkapli, H. M. Akil, and Z. Ahmad, Compos. Interfaces, 18, 449 (2011).
F. Vollrath and D. Porter, Polymer (Guildf), 50, 5623 (2009).
J. G. Hardy, L. M. Römer, and T. R. Scheibel, Polymer (Guildf), 49, 4309 (2008).
L. Eisoldt, A. Smith, and T. Scheibel, Mater. Today, 14, 80 (2011).
T. A. Blackledge, J. Arachnol., 40, 1 (2012).
A. Sponner, Entomol. Res., 37, 238 (2007).
J. G. Hardy and T. R. Scheibel, Prog. Polym. Sci., 35, 1093 (2010).
D. B. Dittenber and H. V. S. Gangarao, Compos. Part A: Appl. Sci. Manuf., 43, 1419 (2012).
W. Doherty, P. Halley, L. Edye, D. Rogers, F. Cardona, Y. Park, and T. Woo, Polym. Adv. Technol., 18, 673 (2007).
M. S. Huda, L. T. Drzal, M. Misra, and A. K. Mohanty, J. Appl. Polym. Sci., 102, 4856 (2006).
M. Avella, G. Bogoeva-Gaceva, A. Bužarovska, M. E. Errico, G. Gentile, and A. Grozdanov, J. Appl. Polym. Sci., 108, 3542 (2008).
F. Le Digabel, N. Boquillon, P. Dole, B. Monties, and L. Averous, J. Appl. Polym. Sci., 93, 428 (2004).
L. Avérous and F. Le Digabel, Carbohydr. Polym., 66, 480 (2006).
M. Shibata, K.-I. Takachiyo, K. Ozawa, R. Yosomiya, and H. Takeishi, J. Appl. Polym. Sci., 85, 129 (2002).
M. R. Nanda, M. Misra, and A. K. Mohanty, Macromol. Mater. Eng., 297, 184 (2012).
L. Jiang, J. Huang, J. Qian, F. Chen, J. Zhang, M. P. Wolcott, and Y. Zhu, J. Polym. Environ., 16, 83 (2008).
A. K. Mohanty, S. Patnaik, B. C. Singh, and M. Misra, J. Appl. Polym. Sci., 37, 1171 (1989).
M. F. Rosa, B. Chiou, E. S. Medeiros, D. F. Wood, T. G. Williams, L. H. C. Mattoso, W. J. Orts, and S. H. Imam, Bioresour. Technol., 100, 5196 (2009).
H. P. A. Khalil and H. Ismail, Polym. Test., 20, 65 (2000).
D. J. Gardner, M. Blumentritt, L. Wang, and N. Yildirim, Rev. Adhes. Adhes., 2, 127 (2014).
M. A. Fuqua, S. Huo, and C. A. Ulven, Polym. Rev., 52, 259 (2012).
K. G. Satyanarayana, G. G. C. Arizaga, and F. Wypych, Prog. Polym. Sci., 34, 982 (2009).
J. Karger-Kocsis, H. Mahmood, and A. Pegoretti, Prog. Mater. Sci., 73, 1 (2015).
N. Graupner, J. Mater. Sci., 43, 5222 (2008).
L. Shumao, R. Jie, Y. Hua, Y. Tao, and Y. Weizhong, Polym. Int., 59, 242 (2010).
R. Xiong, H. S. Kim, S. Zhang, S. Kim, V. F. Korolovych, R. Ma, Y. G. Yingling, C. Lu, and V. V. Tsukruk, ACS Nano, 11, 12008 (2017).
Y. Xie, C. A. S. Hill, Z. Xiao, H. Militz, and C. Mai, Compos. Part A: Appl. Sci. Manuf., 41, 806 (2010).
H.-S. Yang, H.-J. Kim, H.-J. Park, B.-J. Lee, and T.-S. Hwang, Compos. Struct., 77, 45 (2007).
M. J. John, C. Bellmann, and R. D. Anandjiwala, Carbohydr. Polym., 82, 549 (2010).
S.-H. Lee and S. Wang, Compos. Part A: Appl. Sci. Manuf., 37, 80 (2006).
J. Zhang, B. A. Doll, E. J. Beckman, and J. O. Hollinger, J. Biomed. Mater. Res. A, 67, 389 (2003).
T. Gurunathan, S. Mohanty, and S. K. Nayak, Compos. Part A: Appl. Sci. Manuf., 77, 1 (2015).
J. Z. Lu, Q. Wu, and H. S. McNabb, Wood Fiber Sci., 32, 88 (2000).
M. Abdelmouleh, S. Boufi, M. N. Belgacem, A. P. Duarte, A. Ben Salah, and A. Gandini, Int. J. Adhes. Adhes., 24, 43 (2004).
M. C. B. Salon, M. Abdelmouleh, S. Boufi, M. N. Belgacem, and A. Gandini, J. Colloid Interface Sci., 289, 249 (2005).
A. L. M. Sis, N. A. Ibrahim, and W. M. Z. W. Yunus, Iran. Polym. J. Engl. Ed., 22, 101 (2013).
M. S. Huda, L. T. Drzal, A. K. Mohanty, and M. Misra, Compos. Sci. Technol., 68, 424 (2008).
M. A. Sawpan, K. L. Pickering, and A. Fernyhough, Compos. Part A: Appl. Sci. Manuf., 42, 310 (2011).
R. A. Shanks, A. Hodzic, and S. Wong, J. Appl. Polym. Sci., 91, 2114 (2004).
M. Bengtsson and K. Oksman, Compos. Sci. Technol., 66, 2177 (2006).
T. Keener, R. Stuart, and T. Brown, Compos. Part A: Appl. Sci. Manuf., 35, 357 (2004).
K. Issaadi, A. Habi, Y. Grohens, and I. Pillin, Polym. Bull., 73, 2057 (2016).
L. Petersson, K. Oksman, and A. P. Mathew, J. Appl. Polym. Sci., 102, 1852 (2006).
J. F. Zhang and X. Sun, Biomacromolecules, 5, 1446 (2004).
Y.-C. Hsu, C.-S. Wu, H.-T. Liao, and Y.-X. Cai, J. Mater. Sci., 50, 7790 (2015).
S. W. Hwang, S. B. Lee, C. K. Lee, J. Y. Lee, J. K. Shim, S. E. M. Selke, H. Soto-Valdez, L. Matuana, M. Rubino, and R. Auras, Polym. Test., 31, 333 (2012).
R. Chollakup, W. Smitthipong, and P. Suwanruji, in Natural Polymers: Composites, RSC Publishing, Cambridge, 2012, Chap. 8, p 161.
J. Huang, L. Zhang, H. Wei, and X. Cao, J. Appl. Polym. Sci., 93, 624 (2004).
H. Wang, X. Sun, and P. Seib, J. Appl. Polym. Sci., 84, 1257 (2002).
A. H. Grigoriou, Wood Sci. Technol., 37, 79 (2003).
J. Gironès, M. T. B. Pimenta, F. Vilaseca, A. J. F. de Carvalho, P. Mutjé, and A. A. S. Curvelo, Carbohydr. Polym., 68, 537 (2007).
T. Ohkita and S.-H. Lee, J. Adhes. Sci. Technol., 18, 905 (2004).
S. Singh, A. K. Mohanty, and M. Misra, Compos. Part A: Appl. Sci. Manuf., 41, 304 (2010).
A. U. R. Shah, M. N. Prabhakar, and J. I. Song, Int. J. Precis. Eng. Manuf. Green Technol., 4, 247 (2017).
Z. Kovacevic, S. Bischof, and M. Fan, Compos. Part B: Eng., 78, 122 (2015).
A. Awal, M. Rana, and M. Sain, Mech. Mater., 80, 87 (2015).
F. Hassouna, J.-M. Raquez, F. Addiego, V. Toniazzo, P. Dubois, and D. Ruch, Eur. Polym. J., 48, 404 (2012).
I. Bibers, V. Tupureina, A. Dzene, and M. Kalnins, Mech. Compos. Mater., 35, 357 (1999).
L. V. Labrecque, R. A. Kumar, V. Davé, R. A. Gross, and S. P. McCarthy, J. Appl. Polym. Sci., 66, 1507 (1997).
O. Martin and L. Avérous, Polymer (Guildf), 42, 6209 (2001).
S. Jacobsen and H. G. Fritz, Polym. Eng. Sci., 36, 2799 (1996).
N. A. Ibrahim, W. M. Z. W. Yunus, M. O. K. Abdan, and K. A. Hadithon, J. Reinf. Plast. Compos., 29, 1099 (2010).
K. Oksman, M. Skrifvars, and J. F. Selin, Compos. Sci. Technol., 63, 1317 (2003).
K. Sudesh, H. Abe, and Y. Doi, Prog. Polym. Sci., 25, 1503 (2000).
M. E. Mngomezulu, M. J. John, V. Jacobs, and A. S. Luyt, Carbohydr. Polym., 111, 149 (2014).
C. A. Ryan, S. L. Billington, and C. S. Criddle, J. Polym. Environ., 26, 1715 (2018).
L. Wang, S. S. Chen, D. C. W. Tsang, C. S. Poon, and Y. S. Ok, Environ. Sci. Pollut. Res., 24, 12227 (2017).
C. Prapruddivongs and N. Sombatsompop, Adv. Mater. Res., 747, 111 (2013).
C. Prapruddivongs and N. Sombatsompop, Adv. Mater. Res., 410, 67 (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Acknowledgments: This work was funded as part of the GELCLAD project, which has received funding from the EU Horizon 2020 Research and Innovation Programme under Grant Agreement No. 723425.
Rights and permissions
About this article
Cite this article
Ghaffar, S.H., Madyan, O.A., Fan, M. et al. The Influence of Additives on the Interfacial Bonding Mechanisms Between Natural Fibre and Biopolymer Composites. Macromol. Res. 26, 851–863 (2018). https://doi.org/10.1007/s13233-018-6119-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13233-018-6119-8