Abstract
The paper presents a computational procedure for reliability analysis of earth slopes in which the probabilistic critical slip surface is located using a mathematical programming formulation similar to that used to search for the deterministic critical slip surface in a conventional slope stability analysis. The procedure is based on the First Order Reliability Method (FORM) in conjunction with the Spencer method for evaluation of factor of safety of general slip surfaces and the Sequential Quadratic Programming (SQP) technique of optimization. When applied to two benchmark illustrative examples, the procedure yields the probabilistic critical slip surfaces which are reasonable and the values of the associated minimum reliability indices are close to or lower than those reported by different investigators using different methodologies, and compare well with those from the direct Monte-Carlo simulation method (MCS). Further, the developed procedure has been made use of to investigate another important aspect of reliability analysis, namely, how the results of reliability analyses vary with the probability distributions assumed for the basic random variables. Three most commonly assumed distributions, namely, normal, lognormal and truncated normal distributions have been considered. The results indicate that the lognormal assumption used solely to ensure non-negativity of the basic variables might lead to non-conservative prediction of probability of failure. Whether the effect of such distributional assumption is consistent when the coefficients of variation (COVs) of the basic random variables vary within their respective ranges has also been investigated.
Similar content being viewed by others
References
Alonso EE (1976) Risk analysis of slopes and its application to slopes in Canadian sensitive clays. Geotechnique 26(03):453–472
Ang AHS, Tang WH (1984) Probability concepts in engineering planning and design: decision, risk and reliability, vol II. Wiley, New York
Baecher GB, Christian JT (2003) Reliability and statistics in geotechnical engineering. Wiley, New York
Bhattacharya G, Jana D, Ojha S, Chakraborty S (2003) Direct search for minimum reliability index of earth slopes. Comput Geotech 30(6):455–462
Cho SE (2009) Probabilistic stability analyses of slopes using the ANN-based response surface. Comput Geotech 36(5):787–797
Chowdhury R, Rao BN (2010) Probabilistic stability assessment of slopes using high dimensional model representation. Comput Geotech 37(7–8):876–884
Chowdhury R.N. (1984). Risk estimation for failure progression along a slip surface. Proceedings of the 4th international symposium on landslides, Canadian geotechnical society, ON, Canada, 381–386
Chowdhury RN, Xu DW (1992) Reliability index for slope stability assessment-two methods compared. Reliab Eng Syst Saf 37(2):99–108
Chowdhury RN and Zhang S (1988). Prediction of critical slip surface. Proceedings of the 5th Australia-New zealand conference on geomechanics; 451–455
Christian JT, Baecher GB (1999) Point-estimate method as numerical quadrature. J Geotech Geoenviron Eng ASCE 125(09):779–787
Christian JT, Ladd CC, Baecher GB (1994) Reliability applied to slope stability analysis. J Geotech Eng Div ASCE 120(12):2180–2207
Cornell, C.A. (1971). First-order uncertainty analysis of soils deformation and stability, Proceedings of the 1st International Conference on Application of Statistics and Probability to Soil and Structural Engineering, University of Hong Kong, 130–144
Crum DA (2001) Discussion of ‘search algorithm for minimum reliability index of earth slopes’ by Hassan AM and Wolff TF. J Geotech Geo-environ Eng 127(02):197–198
Das SK, Das MR (2010) Discussion of “Reliability-based economic design optimization of spread foundations—by Y. Wang”. J Geotech Geo-environ Eng 136(11):1587–1588
Duncan JM (2000) Factors of safety and reliability in geotechnical engineering. J Geotech Geo-environ Eng 126(04):307–316
Duncan JM, Wright SG (1980) The accuracy of equilibrium methods of slope stability analysis. Eng Geol 16(1–2):5–17
El-Ramly H, Morgenstern NR, Cruden DM (2002) Probabilistic slope stability analysis for practice. Can Geotech J 39:665–683
El-Ramly H, Morgenstern NR, Cruden DM (2003) Probabilistic stability analysis of a tailings dyke on presheared clay-shale. Can Geotech J 40:192–208
Greco VR (1996) Efficient monte carlo technique for locating critical slip surface. J Geotech Eng Div ASCE 117(10):517–525
Haldar A, Mahadevan S (2000) Probability, reliability, and statistical methods in engineering design. Wiley, New York
Hasofer AA, Lind AM (1974) Exact and invariant second moment code format. J Eng Mech Div ASCE 100(01):111–121
Hassan AM, Wolff TF (1999) Search algorithm for minimum reliability index of earth slopes. J Geotech Geo-environ Eng 125(04):301–308
Hassan AM, Wolff TF (2001) Closure to ‘Search algorithm for minimum reliability index of earth slopes’. J Geotech Geo-environ Eng 127(02):198–200
Hong H, Roh G (2008) Reliability Evaluation of Earth Slopes. J Geotech Geo-environ Eng 134(12):1700–1705
Husein Malkawi AI, Hassan WF, Abdulla FA (2000) Uncertainty and reliability analysis applied to slope stability. Struct Saf 22:161–187
Khajehzadeh M, Taha MR, El-Shafie A (2010) Harmony search algorithm for probabilistic analysis of earth slope. EJGE 15:1647–1659
Li KS (1992) Point-estimate method for calculating statistical moments. J Eng Mech Div ASCE 118(7):1506–1511
Li KS, Cheung RWM (2001) Discussion of ‘Search algorithm for minimum reliability index of earth slopes’ by Hassan AM, Wolff TF. J Geotech Geo-environ Eng ASCE 127(02):197–198
Li KS, Lumb P (1987) Probabilistic design of slopes. Can Geotech J 24(04):520–535
Liang, Li and Xue-song, Chu (2012), The Location of Critical Reliability Slip Surface in Soil Slope Stability Analysis, 2012 International Conference on Structural Computation and Geotechnical Mechanics (SCGM 2012), Vol 5, P 146–149
Liang RY, Nusier OK, Malkawi AH (1999) A reliability based approach for evaluating the slope stability of embankment dams. Eng Geol 54(3–4):271–285
Low BK, Gilbert RB, Wright SG (1998) Slope reliability analysis using generalized method of slices. J Geotech Geo-environ Eng 124(4):350–362
Metya S, Bhattacharya G (2012) Slope reliability analysis using the first order reliability method. J Life Cycle Reliab Saf Eng 1(3):01–07
Morgenstern NR, Price VE (1965) The analysis of the stability of general slip surfaces. Geotechinque 15(1):79–93
Nguyen VU, Chowdhury RN (1985) Simulation for risk analysis with correlated variables. Geotechnique 35(01):47–58
Rao SS (2009) Engineering optimization: theory and practice, fourth edition. Wiley, New York
Rosenbleuth E (1975) Point estimates for probability moments. Proc Natl Acad Sci 72(10):3812–3814
Rosenbleuth E (1981) Two-point estimates in probabilities. Appl Math Model 5(02):329–335
Schittkowski K (1980) Nonlinear programming codes: information, tests, performance. Lecture notes in economics and mathematical systems, Vol. 183. Springer, New York
Spencer E (1967) A method of analysis of the stability of embankments assuming parallel inter-slice forces. Geotechnique 17(1):11–26
Spencer E (1973) The thrust line criterion in embankment stability analysis. Geotechnique 23(1):85–100
Tang WH, Yucemen MS, Ang AHS (1976) Probability based short term design of soil slopes. Can Geotech J 13:201–215
Tobutt D, Richards E (1979) The reliability of earth slopes. Int J Numer Anal Meth Geomech 3(4):323–354
Vanmarcke EH (1977) Reliability of earth slopes. J Geotech Eng Div ASCE 103(11):1247–1265
Wolff TF (1985). Analysis and design of embankment dam slopes: a probabilistic approach. Ph.D. dissertation, Purdue University; West lafayette, Indiana
Wolff TF (1991) Embankment reliability versus factor of safety: before and after slide repair. Int J Numer Anal Meth Geomech 3:323–354
Wu TH, Kraft LM (1967) The probability of foundation safety. J Soil Mech Found Eng Div ASCE 93(SM5):213–231
Xu B, Low BK (2006) Probabilistic stability analyses of embankments based on finite element method. J Geotech Geo-environ Eng 132(11):1444–1454
Xue JF, Gavin K (2007) Simultaneous determination of critical slip surface and reliability index for slopes. J Geotech Geo-environ Eng ASCE 133(7):878–886
Acknowledgments
This research has been supported by the AORC Scheme of the INSPIRE Program of the Department of Science & Technology (DST), Govt. of India and the first author is employed as a INSPIRE Fellow with DST support. This support is gratefully acknowledged. The writers also thank two anonymous reviewers for their constructive comments and suggestions.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Metya, S., Bhattacharya, G. Probabilistic Critical Slip Surface for Earth Slopes Based on the First Order Reliability Method. Indian Geotech J 44, 329–340 (2014). https://doi.org/10.1007/s40098-013-0089-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40098-013-0089-8