Abstract
This paper presents a smart pressure transmitter using bellow as primary sensor. The deflection of bellow is converted into electrical output using hall probe sensor as secondary sensor. The output Hall voltage is affected by change in input parameters like temperature. So firstly the effect of temperature on Hall voltage is derived mathematically and then experimentally analyzed. This effect of temperature on output Hall voltage is then compensated using artificial neural network. The compensated output Hall voltage is then converted into (4–20) mA current signal using signal conditioning circuit. The proposed design, experimental and testing results are reported in this paper.
Similar content being viewed by others
References
Beeby, S. P., Stuttle, M., & White, N. M. (2000). Design and fabrication of a low-cost microengineered silicon pressure sensor with linearised output. IEE Proceedings-Science, Measurement and Technology, 147, 127–130. https://doi.org/10.1049/ip-smt:20000355.
Bentley, P. (1995). Principles of measurement systems. Singapore: Longman Singapore publishers Ltd.
Bera, S. C., Mandal, N., & Sarkar, R. (2011). Study of a pressure transmitter using an improved inductance bridge network and bourdon tube as transducer. IEEE Transactions on Instrumentation and Measurement, 60, 1453–1460. https://doi.org/10.1109/TIM.2010.2090697.
Chattopadhyay, S., & Sarkar, J. (2012). Design and development of a reluctance type pressure transmitter. In 7th IEEE international conference on electrical & computer engineering (ICECE) (pp. 70–73). https://doi.org/10.1109/ICECE.2012.6471487.
Chattopadhyay, S., Sarkar, J., & Bera, S. C. (2013). A low cost design and development of a reluctance type pressure transducer. Measurement, 46, 491–496. https://doi.org/10.1016/j.measurement.2012.08.006.
Chen, G., Sun, T., Wang, P., & Sun, B. (2006). Design of temperature compensation system of pressure sensors. In IEEE international conference on information acquisition (pp. 1042–1046). https://doi.org/10.1109/ICIA.2006.305883.
Dong, N., Wang, S., Jiang, L., Jiang, Y., Wang, P., & Zhang, L. (2018). Pressure and temperature based on graphene diaphragm and fiber Bragg gratings. IEEE Photonics Technology Letters, 30, 431–434. https://doi.org/10.1109/LPT.2017.2786292.
Gurney, K. (1997). An introduction to neural networks. London: UCL Press.
Hooshmand, R. A., & Joorabian, M. (2006). Design and optimization of electromagnetic flowmeter for conductive liquids and its calibration based on neural networks. IEE Proceedings on science Measurement and Technology, 153, 139–146. https://doi.org/10.1049/ip-smt:20050042.
Huang, J., Yuan, H., Cui, Y., & Zheng, Z. (2010). Nonintrusive pressure measurement with capacitance method based on FLANN. IEEE Transactions on Instrumentation and Measurement, 59, 2914–2920. https://doi.org/10.1109/TIM.2010.2045933.
Kumar, V. N., & Narayana, K. V. L. (2016). Development of an ANN-based pressure transducer. IEEE Sensors Journal, 16, 53–60. https://doi.org/10.1109/JSEN.2015.2477458.
Liptak, B. G. (1999). Process measurement and analysis. Oxford: Butterworth Heinman.
Massicotte, D., Legendre, S., & Barwicz, A. (1998). Neural-network-based method of calibration and measurand reconstruction for a high-pressure measuring system. IEEE Transactions on Instrumentation and Measurement, 47, 362–370. https://doi.org/10.1109/19.744175.
Patra, J. C. (1997). An artificial neural network-based smart capacitive pressure sensor. Measurement, 22, 113–121. https://doi.org/10.1016/S0263-2241(97)00074-2.
Patra, J. C., Juhola, M., & Meher, P. K. (2008). Intelligent sensors using computationally efficient Chebyshev neural networks. IET Science, Measurement and Technology, 2, 68–75. https://doi.org/10.1049/iet-smt:20070061.
Patra, J. C., Meher, P. K., & Chakraborty, G. (2011). Development of Laguerre neural-network-based intelligent sensors for wireless sensor networks. IEEE Transactions on Instrumentation and Measurement, 60, 725–734. https://doi.org/10.1109/TIM.2010.2082390.
Patra, J. C., & Panda, G. (1998). ANN-based intelligent pressure sensor in noisy environment. Measurement, 23, 229–238. https://doi.org/10.1016/S0263-2241(98)00026-8.
Patra, J. C., & Van den Bos, A. (1999). Modeling and development of an ANN-based smart pressure sensor in a dynamic environment. Measurement, 26, 249–262. https://doi.org/10.1016/S0263-2241(99)00044-5.
Patra, J. C., & Van den Bos, A. (2000). Modeling of an intelligent pressure sensor using functional link artificial neural networks. ISA Transactions, 39, 15–27. https://doi.org/10.1016/S0019-0578(99)00035-X.
Rajita, G., Banerjee, D., Mandal, N., & Bera, S. C. (2015). Design and analysis of Hall effect probe-based pressure transmitter using bellows as sensor. IEEE Transactions on Instrumentation and Measurement, 64, 2548–2556. https://doi.org/10.1109/TIM.2015.2403152.
Rath, S. K., Patra, J. C., & Kot, A. C. (2000). An intelligent pressure sensor with self-calibration capability using artificial neural networks. In IEEE international conference on systems, man, and cybernetics (pp. 2563–2568). https://doi.org/10.1109/ICSMC.2000.884379.
Reverter Cubarsí, F., Horak, G., Bilas, V., & Gasulla Forner, M. (2009). Novel and low-cost temperature compensation technique for piezoresistive pressure sensors. In Fundamental and applied metrology XIX IMEKO World Congress (pp. 2084–2087). http://hdl.handle.net/2117/12816.
Rogers, J. E., Yoon, Y.-K., Sheplak, M., & Jack, J. W. (2018). A passive wireless microelectromechanical pressure sensor for harsh environments. Journal of Micro electromechanical Systems, 27, 73–85. https://doi.org/10.1109/JMEMS.2017.2774000.
Sinha, S., & Mandal, N. (2017). Design and analysis of an intelligent flow transmitter using artificial neural network. IEEE Sensors Letters, 1, 1–4. https://doi.org/10.1109/LSENS.2017.2701409.
Vaegae, N. K., Komanapalli, V. L. N., & Malla, S. (2016). Development of an intelligent pressure measuring technique for bellows using radial basis function neural network. Sensors and Actuators, A: Physical, 238, 240–248. https://doi.org/10.1016/j.sna.2015.12.017.
Yao, Z., Liang, T., Jia, P., Hong, Y., Qi, L., Lei, C., et al. (2016). Passive resistor temperature compensation for high-temperature piezoresistive pressure sensor. Sensors, 16, 1142. https://doi.org/10.3390/s16071142.
Yegnanarayana, B. (2005). Artificial neural networks. New York: Academic.
Zenere, A., & Zorzi, M. (2018). On the coupling of model predictive control and robust Kalman filtering. IET Control Theory and Applications, 12, 1873–1881. https://doi.org/10.1049/iet-cta.2017.1074.
Zhou, H., Zhou, H., Zhang, H., Ge, X., Zhao, Y., & Lin, W. (2017). Pressure measurement based on multi-waves fusion algorithm. IET Science, Measurement and Technology, 11, 354–362. https://doi.org/10.1049/iet-smt.2016.0439.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sinha, S., Mandal, N. Design of a Smart Pressure Transmitter and Its Temperature Compensation Using Artificial Neural Network. J Control Autom Electr Syst 30, 95–103 (2019). https://doi.org/10.1007/s40313-018-00430-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40313-018-00430-1