Abstract
As a result of socio-economic growth, major increase in solid waste generation is taking place which can lead to resource depletion and environmental concerns. To address this inefficient cycle of make, use and dispose, the concept of circular economy has recently been proposed that de-linearizes the current relationship between economic growth, environmental degradation and resource consumption thorough its 6Rs (Reuse, Recycle, Redesign, Remanufacture, Reduce, Recover). In the construction sector, currently the production of binding agents and transportation of virgin aggregates is associated with considerable environmental pollution. As a result, major attempts are taking place to substitute such ingredients with more sustainable and potentially cheaper materials. With waste glass having a production of roughly 100 million tons annually, and its low recycling rate of 26%, there is a growing number of studies unlocking its potential as an eco-friendly substitute for Portland cement (with particle size of below \(100\ \upmu \hbox {m}\)) or fine aggregate (with size of below 4.75 mm) in concrete. As a result, this article intends to review the connection of construction sector and circular economy with recycled glass in its center. Accordingly, by partially replacing cement or aggregate with recycled glass, on average, up to 19% greenhouse gas, and 17% energy consumption reduction as well as major cost savings can be made. Additionally, in technical concrete terms, better fresh properties and fire resistance, as well as lower permeability, and in fine grades, favorable cementitious properties are reported as major benefits of using waste glass as a sustainable construction material.
Graphical abstract
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Afshinnia, K., Rangaraju, P.R.: Influence of fineness of ground recycled glass on mitigation of alkali–silica reaction in mortars. Constr. Build. Mater. 81, 257–67 (2015). https://doi.org/10.1016/j.conbuildmat.2015.02.041
Afshinnia, K., Rangaraju, P.R.: Impact of combined use of ground glass powder and crushed glass aggregate on selected properties of portland cement concrete. Constr. Build. Mater. 117, 263–72 (2016). https://doi.org/10.1016/j.conbuildmat.2016.04.072
Ahmad, S., Umar, A., Masood, A.: Properties of normal concrete, self-compacting concrete and glass fibre-reinforced self-compacting concrete: an experimental study. Procedia Eng. 173, 807–13 (2017)
Ahmad, M.R., Chen, B., Shah, S.F.A.: Influence of different admixtures on the mechanical and durability properties of one-part alkali-activated mortars. Constr. Build. Mater. 265, 120320 (2020)
Aliabdo, A.A., Abd, E.M., Elmoaty, A., Aboshama, A.Y.: Utilization of waste glass powder in the production of cement and concrete. Constr. Build. Mater. 124, 866–77 (2016). https://doi.org/10.1016/j.conbuildmat.2016.08.016
Aly, M., et al.: Effect of nano clay particles on mechanical, thermal and physical behaviours of waste-glass cement mortars. Mater. Sci. Eng. A 528(27), 7991–98 (2011). https://doi.org/10.1016/j.msea.2011.07.058
Arrigoni, A., et al.: Life cycle greenhouse gas emissions of concrete containing supplementary cementitious materials: cut-off vs. substitution. J. Clean. Prod. 263, 121465 (2020). https://doi.org/10.1016/j.jclepro.2020.121465
ASTM Committee C01.31: ASTM C1608-12 standard test method for chemical shrinkage of hydraulic cement paste. Annual Book of ASTM Standards Volume 04.01 i, 1–5 (2012)
BA systems: A Guide to the 4 Main Glass Types \(|\) BA Systems. https://www.basystems.co.uk/blog/2016/10/glass-types/ (2021)
Baldassarre, B., et al.: Industrial symbiosis: towards a design process for eco-industrial clusters by integrating circular economy and industrial ecology perspectives. J. Clean. Prod. 216, 446–60 (2019). https://doi.org/10.1016/j.jclepro.2019.01.091
Barsoum, M.W.: Fundamentals of ceramics. Fundamentals of Ceramics, 1–612 (2002)
Beaudoin, J., Odler, I.: Lea’s Chemistry of Cement and Concrete Hydration, Setting and Hardening of Portland Cement, 5th edn. Elsevier Ltd (2019)
Bentz, D.P., Hansen, A.S., Guynn, J.M.: Optimization of cement and fly ash particle sizes to produce sustainable concretes. Cement Concr. Compos. 33(8), 824–31 (2011). https://doi.org/10.1016/j.cemconcomp.2011.04.008
Berenjian, A., Whittleston, G.: History and manufacturing of glass title history and manufacturing of glass history and manufacturing of glass. Am. J. Mater. Sci. 2017(1), 18–24 (2017). https://doi.org/10.5923/j.materials.20170701.03. This version is available at: http://usir.salford.ac.uk/id/eprint/41631/
Boghossian, E., Wegner, L.D.: Use of flax fibres to reduce plastic shrinkage cracking in concrete. Cement Concr. Compos. 30(10), 929–37 (2008). https://doi.org/10.1016/j.cemconcomp.2008.09.003
Brambilla, G., Lavagna, M., Vasdravellis, G., Castiglioni, C.A.: Environmental benefits arising from demountable steel-concrete composite floor systems in buildings. Resour. Conserv. Recycling 141(August 2018), (2019) https://doi.org/10.1016/j.resconrec.2018.10.014
Brown, P., Bocken, N., Balkenende, R.: Why do companies pursue collaborative circular oriented innovation? Sustainability (Switzerland) 11(3), 1–23 (2019)
Carsana, M., Frassoni, M., Bertolini, L.: Comparison of ground waste glass with other supplementary cementitious materials. Cement Concr. Compos. 45, 39–45 (2014). https://doi.org/10.1016/j.cemconcomp.2013.09.005
Carter, C.B., Grant Norton, M.: Springer Ceramic Materials, Science and Engineering. Springer, New York (2013)
Corinaldesi, V., Gnappi, G., Moriconi, G., Montenero, A.: Reuse of ground waste glass as aggregate for mortars. Waste Manag. 25(2 SPEC. ISS.), 197–201 (2005)
Dhir, R.K., Dyer, T.D., Tang, M.C.: Alkali-silica reaction in concrete containing glass. Mater. Struct./Materiaux et Constr. 42(10), 1451–62 (2009)
Du, H., Tan, K.H.: Waste glass powder as cement replacement in concrete. J. Adv. Concr. Technol. 12(11), 468–77 (2014)
Du, H., Tan, K.H.: Transport properties of concrete with glass powder as supplementary cementitious material. ACI Mater. J. 112(3), 429–37 (2015)
Du, H., Tan, K.H.: Properties of high volume glass powder concrete. Cement Concr. Compos. 75, 22–29 (2017). https://doi.org/10.1016/j.cemconcomp.2016.10.010
Eberhardt, L.C., Malabi, M.B., Birgisdottir, H.: Building design and construction strategies for a circular economy. Archit. Eng. Des. Manag. 1–21 (2020)
EIA: Electricity generation from natural gas and renewables increases as a result of lower natural gas prices and declining costs of solar and wind renewable capacity, making these fuels increasingly competitive (2020)
Elaqra, H.A., Abou Haloub, M.A., Rustom, R.N.: Effect of new mixing method of glass powder as cement replacement on mechanical behavior of concrete. Constr. Build. Mater. 203, 75–82 (2019). https://doi.org/10.1016/j.conbuildmat.2019.01.077
Environment, U.N., et al.: Cement and concrete research eco-efficient cements?: Potential economically viable solutions for a low-CO\(_2\) cement-based materials industry? Cem. Concr. Res. 114(June), 2–26 (2018). https://doi.org/10.1016/j.cemconres.2018.03.015
Environmental protection agency: “EPA - Glass” (2017)
Etris, S.F., et al.: Waste glass as coarse aggregate for concrete. J. Test. Eval. 2(5), 344 (1974)
Federico, L.M., Chidiac, S.E.: Waste glass as a supplementary cementitious material in concrete: critical review of treatment methods. Cement Concr. Compos. 31(8), 606–10 (2009). https://doi.org/10.1016/j.cemconcomp.2009.02.001
Figueira, R.B., et al.: Alkali-silica reaction in concrete: mechanisms, mitigation and test methods. Constr. Build. Mater. 222, 903–31 (2019). https://doi.org/10.1016/j.conbuildmat.2019.07.230
Flower, D.J.M., Sanjayan, J.G.: Green house gas emissions due to concrete manufacture. Int J. Life Cycle Asses. 12(5), 282–88 (2007)
Galitsky, C., et al.: Energy efficiency improvement and cost saving opportunities for the glass industry. An ENERGY STAR Guide for Energy and Plant Managers. Berkeley, CA. http://www.osti.gov/servlets/purl/927883-Pndaxj/ (2008)
Geissdoerfer, M., Savaget, P., Bocken, N.M.P., Hultink, E.J.: The circular economy: a new sustainability paradigm? J. Clean. Prod. 143, 757–68 (2017). https://doi.org/10.1016/j.jclepro.2016.12.048
Ghisellini, P., Ripa, M., Ulgiati, S.: Exploring environmental and economic costs and benefits of a circular economy approach to the construction and demolition sector: a literature review. J. Clean. Prod. 178, 618–43 (2018)
Giergiczny, Z.: Fly ash and slag. Cem. Concrete Res. 124(February) (2019)
Gorospe, K., Booya, E., Ghaednia, H., Das, S.: Effect of various glass aggregates on the shrinkage and expansion of cement mortar. Constr. Build. Mater. 210, 301–11 (2019). https://doi.org/10.1016/j.conbuildmat.2019.03.192
Grubeša, I.N., Barišic, I., Fucic, A., Bansode, S.S.: Characteristics and uses of steel slag in building construction characteristics and uses of steel slag in building construction (2016)
Guo, P., et al.: New perspectives on recycling waste glass in manufacturing concrete for sustainable civil infrastructure. Constr. Build. Mater. 257, 119579 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119579
Hajimohammadi, A., Ngo, T., Kashani, A.: Glass waste versus sand as aggregates: the characteristics of the evolving geopolymer binders. J. Clean. Prod. 193, 593–603 (2018a). https://doi.org/10.1016/j.jclepro.2018.05.086
Hajimohammadi, A., Ngo, T., Kashani, A.: Sustainable one-part geopolymer foams with glass fines versus sand as aggregates. Constr. Build. Mater. 171, 223–31 (2018b). https://doi.org/10.1016/j.conbuildmat.2018.03.120
Hambach, M., Volkmer, D.: Properties of 3D-printed fiber-reinforced portland cement paste. Cement Concr. Compos. 79, 62–70 (2017)
Han, Y., Yang, Z., Ding, T., Xiao, J.: Environmental and economic assessment on 3D printed buildings with recycled concrete. J. Clean. Prod. 278, 123884 (2021)
Hanif, A., et al.: Properties improvement of fly ash cenosphere modified cement pastes using nano silica. Cement Concr. Compos. 81, 35–48 (2017). https://doi.org/10.1016/j.cemconcomp.2017.04.008
Hartley, A.: A study of the balance between furnace oprating parameters and recycled glass melting furnace.’ Carbon Trust. https://www.glass-ts.com/userfiles/files/2004 - A Study of the Balance between Furnace Operating Parameters and Recycled Glass in Glass Melting Furnaces (Carbon Trust).pdf (2004)
Hasanuzzaman, M., Rafferty, A., Sajjia, M., Olabi, A.-G.: Properties of glass materials. In: Reference Module in Materials Science and Materials Engineering, Elsevier. https://linkinghub.elsevier.com/retrieve/pii/B9780128035818039989 (2016)
Hendi, A., et al.: Mix design of the green self-consolidating concrete: incorporating the waste glass powder. Constr. Build. Mater. 199, 369–84 (2019). https://doi.org/10.1016/j.conbuildmat.2018.12.020
Islam, G.M., Sadiqul Rahman, M.H., Kazi, N.: Waste glass powder as partial replacement of cement for sustainable concrete practice. Int. J. Sustain. Built Environ. 6(1), 37–44 (2017). https://doi.org/10.1016/j.ijsbe.2016.10.005
Ismail, Z.Z., AL-Hashmi, E.A.: Recycling of waste glass as a partial replacement for fine aggregate in concrete. Waste Manag. 29(2), 655–59 (2009). https://doi.org/10.1016/j.wasman.2008.08.012
Jain, K.L., Sancheti, G., Gupta, L.K.: Durability performance of waste granite and glass powder added concrete. Constr. Build. Mater. 252, 119075 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119075
Jani, Y., Hogland, W.: Waste glass in the production of cement and concrete: a review. J. Environ. Chem. Eng. 2(3), 1767–75 (2014). https://doi.org/10.1016/j.jece.2014.03.016
Jiang, M., Chen, X., Rajabipour, F., Hendrickson, C.T.: Comparative life cycle assessment of conventional, glass powder, and alkali-activated slag concrete and mortar. J. Infrastruct. Syst. 20(4), 04014020 (2014)
Jose, R., et al.: Artificial intelligence-driven circular economy as a key enabler for sustainable energy management. Mater. Circular Econ. 2(1), 2–8 (2020)
Juenger, M.C.G., Siddique, R.: Recent advances in understanding the role of supplementary cementitious materials in concrete. Cem. Concr. Res. 78, 71–80 (2015). https://doi.org/10.1016/j.cemconres.2015.03.018
Kainer, K.U.: 5 Materials Today High Temperature Ceramic Matrix Composites (2002)
Kamali, M., Ghahremaninezhad, A.: An investigation into the hydration and microstructure of cement pastes modified with glass powders. Constr. Build. Mater. 112, 915–24 (2016). https://doi.org/10.1016/j.conbuildmat.2016.02.085
Kawabata, Y., Yamada, K.: Evaluation of alkalinity of pore solution based on the phase composition of cement hydrates with supplementary cementitious materials and its relation to suppressing ASR expansion. J. Adv. Concr. Technol. 13(11), 538–53 (2015)
Khatib, J., Wright, L., Mangat, P.: External chemical shrinkage of pastes containing flue gas desulphurisation (FGD) waste. Eng. Sci. 6(4), 1669–75 (2011)
Khmiri, A., Chaabouni, M., Samet, B.: Chemical behaviour of ground waste glass when used as partial cement replacement in mortars. Constr. Build. Mater. 44, 74–80 (2013)
Kou, S.C., Poon, C.S.: Properties of self-compacting concrete prepared with recycled glass aggregate. Cement Concr. Compos. 31(2), 107–13 (2009). https://doi.org/10.1016/j.cemconcomp.2008.12.002
Kristály, F., et al.: Lightweight composite from fly ash geopolymer and glass foam. J. Sustain. Cem.-Based Mater. 10(1), 1–22 (2021). https://doi.org/10.1080/21650373.2020.1742246
Langergraber, G., et al.: Implementing nature-based solutions for creating a resourceful circular city. Blue-Green Syst. 2(1), 173–85 (2020)
Larsen, A.W., Merrild, H., Christensen, T.H.: Recycling of glass: accounting of greenhouse gases and global warming contributions. Waste Manage. Res. 27(8), 754–62 (2009)
Lee, H., et al.: Performance evaluation of concrete incorporating glass powder and glass sludge wastes as supplementary cementing material. J. Clean. Prod. 170, 683–93 (2018). https://doi.org/10.1016/j.jclepro.2017.09.133
Lee, C.Y., Lee, H.K., Lee, K.M.: Strength and microstructural characteristics of chemically activated fly ash-cement systems. Cem. Concr. Res. 33(3), 425–31 (2003)
Lehne, J., Preston, F.: Chatham house report making concrete change innovation in low-carbon cement and concrete the royal institute of international affairs, chatham house report series, www.Chathamhouse.Org/Sites/Default/Files/Publications/Research/2018-06-13-makingconcrete-C. www.chathamhouse.org (2018)
Letelier, V., Henríquez-Jara, B.I., Manosalva, M., Moriconi, G.: Combined use of waste concrete and glass as a replacement for mortar raw materials. Waste Manag. 94(May 2020), 107–19 (2019). https://doi.org/10.1016/j.wasman.2019.05.041
Lieder, M., Rashid, A.: Towards circular economy implementation: a comprehensive review in context of manufacturing industry. J. Clean. Prod. 115, 36–51 (2016). https://doi.org/10.1016/j.jclepro.2015.12.042
Lim, J.H., Panda, B., Pham, Q.C.: Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement. Constr. Build. Mater. 178, 32–41 (2018)
Liu, Y., Shi, C., Zhang, Z., Li, N.: An overview on the reuse of waste glasses in alkali-activated materials. Resour. Conserv. Recycl. 144(December 2018), 297–309 (2019)
Lu, J.X., Poon, C.S.: Use of waste glass in alkali activated cement mortar. Constr. Build. Mater. 160, 399–407 (2018). https://doi.org/10.1016/j.conbuildmat.2017.11.080
Macfarlane, T.: Glass structures. Struct. Eng. 85(1), 41–44 (2007). https://www.degruyter.com/view/title/300267
Madandoust, R., Ghavidel, R.: Mechanical properties of concrete containing waste glass powder and rice husk ash. Biosyst. Eng. 116(2), 113–19 (2013). https://doi.org/10.1016/j.biosystemseng.2013.07.006
Maltais, Y., Marchand, J.: Influence of curing temperature on cement hydration and mechanical strength development of fly ash mortars. Cem. Concr. Res. 27(7), 1009–20 (1997)
Mamlouk, M.S., Zaniewski, J.P.: Pearson Materials for Civil and Construction Engineers Fourth Edition (2017)
Mardani-Aghabaglou, A., Tuyan, M., Ramyar, K.: Mechanical and durability performance of concrete incorporating fine recycled concrete and glass aggregates. Mater. Struct./Materiaux et Constr. 48(8), 2629–40 (2015). https://doi.org/10.1617/s11527-014-0342-3
Meyer, C., Egosi, N., Andela, C.: Concrete with waste glass as aggregate. Ice. https://www.icevirtuallibrary.com/doi/abs/10.1680/rarogc.29941.0019
Mirzahosseini, M., Riding, K.A.: Effect of curing temperature and glass type on the pozzolanic reactivity of glass powder. Cem. Concr. Res. 58, 103–11 (2014). https://doi.org/10.1016/j.cemconres.2014.01.015
Mirzahosseini, M., Riding, K.A.: Influence of different particle sizes on reactivity of finely ground glass as supplementary cementitious material (SCM). Cem. Concr. Compos. 56, 95–105 (2015). https://doi.org/10.1016/j.cemconcomp.2014.10.004
Nambiar, E., Kunhanandan, K., Ramamurthy, K.: Air-void characterisation of foam concrete. Cem. Concr. Res. 37(2), 221–30 (2007)
Ng, S.: High costs put cracks in glass-recycling programs. WSJ: Wall Street J. https://www.wsj.com/articles/high-costs-put-cracks-in-glass-recycling-programs-1429695003 (2021)
Nodehi, M., Taghvaee, V.M.: Alkali-activated materials and geopolymer: a review of common precursors and activators addressing circular economy. Circ. Econ. Sustain. (2021)
Olek, J., et al.: Alkali-silica reaction (ASR) mechanisms and detection: an advanced understanding. 243 (2013)
Olofinnade, O.M., et al.: Strength and microstructure of eco-concrete produced using waste glass as partial and complete replacement for sand. Cogent Eng. 5(1), 1–19 (2018)
Omran, A., Tagnit-Hamou, A.: Performance of glass-powder concrete in field applications. Constr. Build. Mater. 109, 84–95 (2016a)
Omran, A., Tagnit-Hamou, A.: Performance of Glass-Powder Concrete in Field Applications. Constr. Build. Mater. 109, 84–95 (2016b). https://doi.org/10.1016/j.conbuildmat.2016.02.006
Onodera, Y., et al.: Formation of metallic cation-oxygen network for anomalous thermal expansion coefficients in binary phosphate glass. Nat. Commun. 8(May), 1–8 (2017). https://doi.org/10.1038/ncomms15449
Park, S.B., Lee, B.C., Kim, J.H.: Studies on mechanical properties of concrete containing waste glass aggregate. Cem. Concr. Res. 34(12), 2181–89 (2004)
Payá, J., Monzó, J., Borrachero, M.V., Peris-Mora, E.: Mechanical treatment of fly ashes. Part I: physico-chemical characterization of ground fly ashes. Cem. Concr. Res. 25(7), 1469–79 (1995)
Pongkrapan, S., Dararutana, P., Wathanakul, P.: Dielectric property of barium-based glasses fabricated using Thailand resource. Integr. Ferroelectr. 114(1), 59–63 (2010)
Poutos, K.H., Alani, A.M., Walden, P.J., Sangha, C.M.: Relative temperature changes within concrete made with recycled glass aggregate. Constr. Build. Mater. 22(4), 557–65 (2008)
Purdon, A.O.: The action of alkalis on blast-furnace slag. J. Soc. Chem. Ind. 9(59), 191–202 (1940)
Roy, R., Kumar, P.: Study and experiment analysis of the feasibility of partial replacement of industrial waste glass powder as cement in self compacting concrete. Int. J. Civ. Eng. Techno. 8(6), 1–9 (2017)
Ruiz, L., Alberto, L., Ramón, X.R., Domingo, S.G.: The circular economy in the construction and demolition waste sector: a review and an integrative model approach. J Clean. Prod. 248 (2020)
Saadi, A., Abood, T.H., et al.: Synthesis and properties of alkali activated borosilicate inorganic polymers based on waste glass. Constr. Build. Mater. 136, 298–306 (2017). https://doi.org/10.1016/j.conbuildmat.2017.01.026
Saccani, A., Bignozzi, M.C.: ASR expansion behavior of recycled glass fine aggregates in concrete. Cem. Concr. Res. 40(4), 531–36 (2010). https://doi.org/10.1016/j.cemconres.2009.09.003
Sagoe-Crentsil, K., Brown, T., Taylor, A.: Drying shrinkage and creep performance of geopolymer concrete. J. Sustain. Cem.-Based Mater. 2(1), 35–42 (2013)
Sandanayake, M., et al.: Greenhouse gas emissions during timber and concrete building construction: a scenario based comparative case study. Sustain. Urban Areas 38(August 2017), 91–97 (2018). https://doi.org/10.1016/j.scs.2017.12.017
Sangha, C.M., Alani, A.M., Walden, P.J.: Relative strength of green glass cullet concrete. Mag. Concrete Res. 56(5), 293–97 (2004)
Saribiyik, M., Piskin, A., Saribiyik, A.: The effects of waste glass powder usage on polymer concrete properties. Constr. Build. Mater. 47, 840–44 (2013). https://doi.org/10.1016/j.conbuildmat.2013.05.023
Schmitz, A., Kamiński, J., Scalet, B.M., Soria, A.: Energy consumption and CO2 emissions of the European glass industry. Energy Policy 39(1), 142–55 (2011)
Schwarz, N., Cam, H., Neithalath, N.: Influence of a fine glass powder on the durability characteristics of concrete and its comparison to fly ash. Cement Concr. Compos. 30(6), 486–96 (2008)
Si, R., Dai, Q., Guo, S., Wang, J.: Mechanical property, nanopore structure and drying shrinkage of metakaolin-based geopolymer with waste glass powder. J. Clean. Prod. 242, 118502 (2020). https://doi.org/10.1016/j.jclepro.2019.118502
Soliman, N.A., Tagnit-Hamou, A.: Partial substitution of silica fume with fine glass powder in UHPC: filling the micro gap. Constr. Build. Mater. 139, 374–83 (2017). https://doi.org/10.1016/j.conbuildmat.2017.02.084
Soutsos, M., Domone, P.: Construction materials: their nature and behaviour. In: Construction Materials: Their Nature and Behaviour, CDC Press, pp. 301–32 (2008)
Stahel, W.R., Reday, G.: The potential for substituting manpower for energy. Report to the Commission of the European Communities (1976)
Stahel, W.R.: The product-life factor. An Inquiry into the Nature of Sustainable Societies: The Role of the Private Sector, pp. 110–65 (1982)
Stanton, T.E.: Expansion of concrete through reaction between cement and aggregate. In: Proceedings of American Society of Civil Engineers 66, 1781–1811. https://trid.trb.org/view/868520 (2021). (1940)
Sukmak, P., De Silva, P., Horpibulsuk, S., Chindaprasirt, P.: Sulfate resistance of clay-Portland cement and clay high-calcium fly ash geopolymer. J. Mater. Civ. Eng. 27(5), 1–11 (2015)
Supit, S.W.M., Shaikh, F.U.A.: Durability properties of high volume fly ash concrete containing nano-silica. Mater. Struct./Materiaux et Constr. 48(8), 2431–45 (2015)
Ting, G.H., Andrew, Y.W., Tay, D., Qian, Y., Tan, M.J.: Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties. J. Mater. Cycles Waste Manag. 21(4), 994–1003 (2019)
Toniolo, N., et al.: Extensive reuse of soda-lime waste glass in fly ash-based geopolymers. Constr. Build. Mater. 188, 1077–84 (2018). https://doi.org/10.1016/j.conbuildmat.2018.08.096
Topçu, I.B., Canbaz, M.: Properties of concrete containing waste glass. Cem. Concr. Res. 34(2), 267–74 (2004)
Tuan, B.L.A.: Development of lightweight aggregate from sewage sludge and waste glass powder for concrete. Constr. Build. Mater. 47, 334–39 (2013). https://doi.org/10.1016/j.conbuildmat.2013.05.039
Tucker, E.L., Ferraro, C.C., Laux, S.J., Townsend, T.G.: Economic and life cycle assessment of recycling municipal glass as a Pozzolan in Portland cement concrete production. Resour. Conserv. Recycl. 129(October 2017), 240–47 (2018). https://doi.org/10.1016/j.resconrec.2017.10.025
United Nations: 68% of the World Population Projected to Live in Urban Areas by 2050, Says UN \(|\) UN DESA \(|\) United Nations Department of Economic and Social Affairs.” https://www.un.org/development/desa/en/news/population/2018-revision-of-world-urbanization-prospects.html (2021). (2020)
U.S. Energy Information Administration: Coal and the Environment - U.S. Energy Information Administration (EIA) (2018)
Vaitkevičius, V., Šerelis, E., Hilbig, H.: the effect of glass powder on the microstructure of ultra high performance concrete. Constr. Build. Mater. 68, 102–9 (2014)
Venkata Mohan, S., Amulya, K., Annie Modestra, J.: Urban biocycles - closing metabolic loops for resilient and regenerative ecosystem: a perspective. Biores. Technol. 306(February), 123098 (2020). https://doi.org/10.1016/j.biortech.2020.123098
Wallah, S.E.: Drying shrinkage of heat-cured fly ash-based geopolymer concrete. Mod. Appl. Sci. 3(12) (2009)
Weng, Y., et al.: Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing. Constr. Build. Mater. 189, 676–85 (2018)
World Bank: Circular Economy and Private Sector Development: Learning Series. https://www.worldbank.org/en/events/2020/09/21/circular-economy-and-private-sector-development-learning-series (April 7, 2021) (2020)
Wright, L., Khatib, J.M.: Sustainability of Construction Materials Sustainability of Desulphurised (FGD) Waste in Construction, 2nd edn. Elsevier Ltd, (2016). https://doi.org/10.1016/B978-0-08-100370-1.00026-3
Xia, M., Sanjayan, J.G.: Methods of enhancing strength of geopolymer produced from powder-based 3D printing process. Mater. Lett. 227, 281–83 (2018)
Yang, S., Cui, H., Poon, C.S.: Assessment of in-situ alkali-silica reaction (ASR) development of glass aggregate concrete prepared with dry-mix and conventional wet-mix methods by X-ray computed micro-tomography. 90(April): 266–76 (2018). https://doi.org/10.1016/j.cemconcomp.2018.03.027
Yao, Z.T., et al.: A comprehensive review on the applications of coal fly ash. Earth Sci. Rev. 141, 105–21 (2015)
Yu, X., Tao, Z., Song, T.Y., Pan, Z.: Performance of concrete made with steel slag and waste glass. Constr. Build. Mater. 114, 737–46 (2016). https://doi.org/10.1016/j.conbuildmat.2016.03.217
Zegardlo, B., Szelag, M., Ogrodnik, P., Bombik, A.: Physico-mechanical properties and microstructure of polymer concrete with recycled glass aggregate. Materials 11(7), (2018)
Zhang, D.W., Wang, D., Lin, X.Q., Zhang, T.: The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes. Constr. Build. Mater. 184, 575–80 (2018)
Zhu, H., Chen, W., Zhou, W., Byars, E.A.: Expansion behaviour of glass aggregates in different testing for alkali-silica reactivity. Mater. Struct./Materiaux et Constr. 42(4), 485–94 (2009)
Acknowledgements
The authors cordially appreciate Dr. Anahita Nodehi from Florence University, Italy for the support provided during the development and revision of this article.
Funding
This research did not receive any specific grant or funding from agencies in the public, commercial, or not-for-profit sectors.
Author information
Authors and Affiliations
Contributions
Mehrab Nodehi: Conceptualization; Data curation; Investigation; Resources; Writing original draft; Vahid Mohammad Taghvaee: Validation, investigation; resources
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Availability of data and materials
The data gathered is available as the supplementary material.
Code availability
The authors declare that no code is used for the purpose of this article.
Ethical approval
No ingredient of this research needs ethics approval.
Consent to participate
Not applicable.
Consent for publication
Not applicable.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Nodehi, M., Mohamad Taghvaee, V. Sustainable concrete for circular economy: a review on use of waste glass. Glass Struct Eng 7, 3–22 (2022). https://doi.org/10.1007/s40940-021-00155-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40940-021-00155-9