Abstract
In this paper, we investigate changes in the mechanical properties of complex structures using a combination of the discrete model, Fast Fourier Transform (FFT) analysis and deep learning. The first idea from this research utilizes the discrete model from a perspective that is different from the finite element method (FEM) of previous works. As the method in this paper only models the mechanical properties of structures with finite degrees of freedom instead of dividing them into smaller elements, it reduces error in evaluation and produces more realistic results compared to the FEM model. Another advantage is how it allows the research to survey both parameters that affect the mechanical properties of structures—the overall stiffness (K) and the damping coefficient (c)—during vibration, while previous researches focus only on one of these two parameters. The second idea is to use FFT analysis to increase the sensitivity of the signal received during vibration. FFT analysis simplifies calculations, thereby reducing the effect of noise or errors. The sensitivity achieved in FFT analysis increases by 25% compared to traditional Fourier Transform (FT) analysis; moreover, the error in FFT analysis compared to experimental results is quite small, less than 2%. This shows that FFT is a suitable method to identify sensitive characteristics in evaluating changes in the mechanical properties. When FFT is combined with the discrete model, results are much better than those of several existing approaches. For the last idea, the manuscript applies deep learning (FFT-deep learning) in the noise reduction process for the original data. This makes the results much more accurate than in previous studies. The results of this research are shown through the monitoring of spans of the Saigon Bridge—the biggest and most important bridge in Ho Chi Minh City, Vietnam—during the past 11 years. The correspondence between the theoretically obtained result and the experimental one at the Saigon Bridge suggests a new area for development in evaluating and forecasting structural changes in the future.
Similar content being viewed by others
Data Availability
All data generated or analyzed during this study are included in this work.
References
Bhardwaj G, Singh IV, Mishra BK (2015) Stochastic fatigue crack growth simulation of interfacial crack in bi-layered FGMs using XIGA. Comput Methods Appl Mech Eng 84:186–229
Kunin B (2013) Stochastic model of brittle crack growth under cyclic load. Int J Pure Appl Math 84:163–174
Yu H, Wu L, Guo L, Wu H, Du S (2010) An interaction integral method for 3D curved cracks in nonhomogeneous materials with complex. Int J Solids Struct 47:2178–2189
Price RJ, Trevelyan J (2014) Boundary element simulation of fatigue crack growth in multi-site damage. Eng Anal Boundary Elem 43:67–75
Bittencourt T, Wawrzynek P, Ingraffea A, Sousa J (1996) Quasi-automatic simulation of crack propagation for 2D LEFM problems. Eng Fract Mech 55:321–334
Moës N, Dolbow J, Belytschko T (1999) A finite element method for crack growth without re-meshing. Int J Numer Methods Eng 46:131–150
Sunde SL, Berto F, Haugen B (2018) Predicting fretting fatigue in engineering design. Int J Fatigue 117:314–326
Vazquez J, Carpinteri A, Bohorquez L, Vantadori S (2019) Fretting fatigue investigation on Al 7075–T651 alloy: experimental, analytical and numerical analysis. Tribol Int 135:478–487
Aeran A, Vantadori S, Carpinteri A, Siriwardane S, Scorza D (2019) Novel non-linear relationship to evaluate the critical plane orientation. Int J Fatigue 124:537–543
Bhatti NA, Wahab MA (2017) Finite element analysis of fretting fatigue under out of phase loading conditions. Tribol Int 109:552–562
Bhatti NA, Wahab MA (2018) Fretting fatigue crack nucleation: a review. Tribol Int 121:121–138
Hojjati-Talemi R, Wahab MA, De Pauw J, De Baets P (2014) Prediction of fretting fatigue crack initiation and propagation lifetime for cylindrical contact configuration. Tribol Int 76:73–91
Nguyen TQ, Nguyen HB (2021) Detecting and evaluating defects in beams by correlation coefficients. Shock Vib 2021:6536249
Nguyen TQ, Tran LQ, Nguyen-Xuan H, Ngo NK (2021) A statistical approach for evaluating crack defects in structures under dynamic responses. Nondestruct. Test Eval 36(2):113–144
Ngo NK, Nguyen TQ, Vu TV, Nguyen-Xuan H (2020) An fast Fourier transform–based correlation coefficient approach for structural damage diagnosis. Struct Health Monit. https://doi.org/10.1177/1475921720949561
Nguyen TQ, Nguyen TTD, Nguyen-Xuan H, Ngo NK (2019) A correlation coefficient approach for evaluation of stiffness degradation of beams under moving load. Comput Mater Continua 61(1):27–53
Kolekar S, Venkatesh K, Oh JS et al (2019) Vibration controllability of sandwich structures with smart materials of electrorheological fluids and magnetorheological materials: a review. J Vib Eng Technol 7:359–377
Khiem NT, Lien TV (2001) A simplified method for natural frequency analysis of a multiple cracked beam. J Sound Vib 245(4):737–751
Ebrahimi A, Heydari M, Behzad M (2018) Optimal vibration control of rotors with an open edge crack using an electromagnetic actuator. J Vib Control 14(1):37–59
Zhang QW (2007) Statistical damage identification for bridges using ambient vibration data. Comput Struct 85(7–8):476–485
Li ZX, Chan HT, Zheng TR (2003) Statistical analysis of online strain response and its application in fatigue assessment of a long-span steel bridge. Eng Struct 25(14):1731–1741
Ayaho M, Kei K, Hideaki N (2000) Bridge management system and maintenance optimization for existing bridges. Comput-Aided Civil Infrastruct Eng 15(3):45–55
Furuta H, He J, Watanabe E (1996) A fuzzy expert system for damage assessment using genetic algorithms and neural networks. Microcomput Civil Eng 11(1):37–45
Mares C, Surace C (1996) Application of genetic algorithms to identify damage in elastic structures. J Sound Vib 195(5):195–215
Sharma V, Raghuwanshi NK, Jain AK (2021) Sensitive sub-band selection criteria for empirical wavelet transform to detect bearing fault based on vibration signals. J Vib Eng Technol. https://doi.org/10.1007/s42417-021-00316-8
Yun CB, Bahng EY (2000) Structural identification using neural networks. Comput Struct 77(1):41–52
Chang CC, Chang TY, Xu YG (2000) Structural damage detection using an iterative neural network. J Intell Mater Syst Struct 11(1):32–42
Huang CS, Hung SL, Wen CM, Tu TT (2003) A neural network approach for structural identification and diagnoses of a building from seismic response data. Earthquake Eng Struct Dynam 32(2):187–206
Zhu XQ, Law SS (2006) Wavelet-based crack identification of bridge beam from operational deflection time history. Int J Solids Struct 43(7–8):2299–2317
Douka E, Loutridis S, Trochidis A (2003) Crack identification in beams using wavelet analysis. Int J Solids Struct 40(13–14):3557–3569
Anantha Ramu S, Johnson VT (1995) Damage assessment of composite structures: a fuzzy logic integrated neural network approach. Comput Struct 57(3):491–502
Ambhore N, Kamble D, Chinchanikar S (2020) Evaluation of cutting tool vibration and surface roughness in hard turning of AISI 52100 steel: an experimental and ANN approach. J Vib Eng Technol 8:455–462
Malla C, Panigrahi I (2019) Review of condition monitoring of rolling element bearing using vibration analysis and other techniques. J Vib Eng Technol 7:407–414
Nguyen TQ, Vuong LC, Le CM, Ngo NK, Nguyen-Xuan H (2020) A data-driven approach based on wavelet analysis and deep learning for identification of multiple-cracked beam structures under moving load. Meas J Int Meas Confed 162:107862
Heydari M, Ebrahimi A, Behzad M (2014) Forced vibration analysis of a Timoshenko cracked beam using a continuous model for the crack. Eng Sci Technol Int J 17:194–204
Nguyen SD, Ngo KN, Tran QT, Choi SB (2013) A new method for beam-damage-diagnosis using adaptive fuzzy neural structure and wavelet analysis. Mech Syst Signal Process 39(1–2):181–194
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Nguyen, T.Q. A Data-Driven Approach to Structural Health Monitoring of Bridge Structures Based on the Discrete Model and FFT-Deep Learning. J. Vib. Eng. Technol. 9, 1959–1981 (2021). https://doi.org/10.1007/s42417-021-00343-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42417-021-00343-5