Abstract
An analysis of cellulose crystallite width, microfibril angle and wood density after the time of thinning (at 8 years) in straight vertical trees was undertaken in a 13-year-old E. globulus trial designed to assess the effect of thinning on tension wood formation. The most important effect was on cellulose crystallite width, which increased with thinning intensity and this was mitigated where fertilizer was applied at the time of thinning. Given the relationship between high crystallite width and tension wood occurrence the results demonstrate that heavy thinning of E. globulus at this age can contribute to tension wood formation. However, tension wood production may be significantly reduced where fertilizer is applied. This is possibly because increased diameter growth as a response to fertilizer application stabilises the stems and this is the mechanism by which trees cope with internal stresses that are generated from wind in destabilsed stands following thinning. In contrast, trees that respond poorly to thinning produce tension wood.
Similar content being viewed by others
References
Blaho J, Vozar M and Sindler J (1994) Some properties of reaction wood and normal wood of beech (Fagus sylvatica L.). Zbornik Vedeckych Prac Drevarskej Fakulty Technickej Univerzity vo Zvolene: 297–306
Boyd JD (1977) Basic cause of differentiation of tension wood and compression wood. Aust For Res 1:121–143
Evans R (1999) A variance approach to the X-ray diffractometric estimation of microfibril angle in wood. Appita J 52(4):283–294
Ferrand JC (1982) Growth stresses and silviculture of eucalypts. Aust For Res 13:75–81
Hamilton JR, Thomas CK, and Carvel KL (1985) Tension wood formation following release of upland oak advance reproduction. Wood Fiber Sci 17:382–390
Hanna RB (1973) Cellulose Sub-elementary Fibrils. Ph.D. Thesis. SUNY College of Environmental Science and Forestry, Syracuse, New York
Hanna RB and Cote WA (1974) The sub-elementary fibril of plant cell wall cellulose. Cytobiologie 10(1):102–116
IAWA (1964) Multilingual glossary of terms used in wood anatomy. Verlagsanstalt, Buchdruckerei, Konkordia, Winterthur, pp 185
Kubler H (1988) Silvicultural control of mechanical stresses in trees. Can J For Res 18(10):1215–1225
Northway RL and Blakemore PA (1996) Evaluation of drying methods for plantation grown eucalypt timber: (c) Sawing, accelerated drying and utilisation characteristics of Eucalyptus globulus. Client report No. 117 CSIRO Forestry and Forest Products. Forest and Wood Products Research and Development Corporation, Melbourne, Australia
Okuyama T, Yamamoto H, Iguchi M and Yoshida M (1990) Generation process of growth stress in cell walls. II. Growth stresses in tension wood. Mokuzai Gakkaishi 36(10):797–803
Okuyama T, Yamamoto H, Yoshida M, Hattori Y and Archer RR (1994) Growth stresses in tension wood: role of microfibrils and lignification. Annels des Sciences Forestiers 51(3):291–300
Polge H (1981) Influence des eclaircies sur constraintes de croissance du hetre. Ann sci for 38:407–423
Sasaki Y, Okuyama T and Kikata Y (1978) The evolution process of growth stress in the tree. The surface stresses on the tree. Mokuzai Gakkaishi 24(3):149–157
Wahyudi I, Okuyama T, Hadi YS, Yoshida M and Watanabe H (1999) Growth stresses and strains in Acacia mangium. For Prod J 49(2):77–81
Wahyudi I, Okuyama T, Hadi YS, Yamamoto H, Yoshida M and Watanabe H (2000) Relationship between growth rate and growth stresses in Paraserianthes falcataria grown in Indonesia. J Trop For Prod 6(1):95–105
Washusen R and Evans R (2001) The association between cellulose crystallite width and tension wood occurrence in Eucalyptus globulus Labill. IAWA J 22(3):235–243
Washusen R and Ilic J (2001). The relationship between transverse shrinkage and tension wood from three provenances of Eucalyptus globulus Labill. Holz Roh-Werkst 59:85–93
Washusen R, Blakemore P, Northway R, Vinden P and Waugh G (2000) Recovery of dried appearance grade timber from Eucalyptus globulus Labill. grown in plantations in medium rainfall areas of the southern Murray-Darling Basin. Aust For 63(4):195–201
Washusen R, Ilic J and Waugh G (2003) The Relationship between longitudinal growth strain, tree form and tension wood at the stem periphery of ten to eleven year-old Eucalyptus globulus Labill. Holzforschung 57(3):308–316
Washusen R, Reeves K, Hingston R, Davis S, Menz D and Morrow A (2004) Processing pruned and un-pruned Eucalyptus globulus managed for sawlog production to produce high value products. Report PN03.1315. The Forest and Products Research and Development Corporation, Melbourne, Australia, pp 27
Waugh G (1972) Growth stresses in poplar. A preliminary study. Bachelor degree dissertation. University of Melbourne, pp 49
Waugh G (2004) Growing Eucalyptus globulus for high-quality sawn products. Eucalyptus in a changing world. In: International IUFRO Conference of the WP2.08.03 on Silviculture and Improvement of Eucalypts, Portugal
Wilson BF, Archer RR (1977) Reaction wood: induction and mechanical action. Annu Rev Plant Physiol 28:23–43
Yamamoto H, Okuyama T and Yoshida M (1993) Generation process of growth strain in cell walls. V. Model of tensile stress generation in gelatinous fibres. Mokuzai Gakkaishi 39(2):118–125
Acknowledgements
Dr Emlyn Williams, Dr Chris Harwood, Dr Geoff Downes and Dr Rob Evans of CSIRO Forestry and Forest Products provided valuable comment during preparation of the manuscript.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Washusen, R., Baker, T., Menz, D. et al. Effect of thinning and fertilizer on the cellulose crystallite width of Eucalyptus globulus . Wood Sci Technol 39, 569–578 (2005). https://doi.org/10.1007/s00226-005-0012-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00226-005-0012-2