Abstract
Educational communities have expanded 3D printing in education, emphasizing the educational value of “creation” to develop the competencies required in the future. This study was conducted for the purpose of identifying the effect size by synthesizing prior studies on the effect of 3D printing in education. To achieve the goal, 26 research papers on 3D printing in education conducted in South Korea from 2014 to 2021 were selected and meta-analysis was performed. The results of meta-analysis are as follows. First, the overall effect size of 3D printing in education was 0.759, which was found to be a medium effect size. Second, the effect sizes for each categorical variable are as follows: both the affective domain and the cognitive domain showed medium effect sizes for the learning effects. Middle school showed a large effect size, and elementary school and high school had a medium effect size. Gifted students had a large effect size, and general students had a medium effect size. In terms of the concentrated subjects, mathematics showed a large effect size and science and technology showed a medium effect size. Single subject showed a large effect size and convergence education had a medium effect size. Both offline classes and blended classes showed increased effect sizes. Both the team activity and the individual activity showed a median effect size. The out-of-school program showed a large effect size, and the school program showed a medium effect size. 3D pens showed a large effect size, and 3D printers showed medium effect size. In terms of the modeling type, unstructured modeling showed a large effect size, as did semi-structured modeling, while semi-structured modeling showed a medium effect size. This study has implications for instructional design that can increase the effect of 3D printing in education.
Similar content being viewed by others
Data availability
The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request.
References
References marked with an asterisk indicate studies included in the meta-analysis
Abdulla Alabbasi, A. M., Ayoub, A. E., & Ziegler, A. (2021). Are gifted students more emotionally intelligent than their non-gifted peers? A meta-analysis. High Ability Studies, 32(2), 189–217. https://doi.org/10.1080/13598139.2020.1770704
An, Y., & Mindrila, D. (2020). Strategies and tools used for learner-centered instruction. International Journal of Technology in Education and Science, 4(2), 133–143. https://doi.org/10.46328/ijtes.v4i2.74
Anand, N., & Dogan, B. (2021). Impact of informal learning environments on STEM education—Views of elementary students and their parents. School Science and Mathematics, 121(6), 369–377. https://doi.org/10.1111/ssm.12490
Anisimova, T., Sabirova, F., & Shatunova, O. (2020). Formation of design and research competencies in future teachers in the framework of STEAM education. International Journal of Emerging Technologies in Learning, 15(2), 204–217. https://www.learntechlib.org/p/217163/
Assante, D., Cennamo, G. M., & Placidi, L. (2020). 3D Printing in Education: an European perspective. In 2020 IEEE Global Engineering Education Conference (EDUCON) (pp. 1133–1138). IEEE. https://doi.org/10.1109/educon45650.2020.9125311
*Bae, M. S. (2020). Effects of 3D Pen and 3D Printing-Based STEAM Program in Hands-on Science Class. Unpublished master's thesis. Incheon: Gyeongin National University of Education. http://www.riss.kr/link?id=T15538299
*Bae, S. A. (2014). Effect of 3D Pen Aided Activity-Centered Education Program on Creativity and Emotional Intelligence of Elementary School Students. Journal of Korean Practical Arts Education, 27(4), 3030–324. https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART001943647
Berman, B. (2012). 3-D printing: The new industrial revolution. Business Horizons, 55(2), 155–162. https://doi.org/10.1016/j.bushor.2011.11.003
Bicer, A., Nite, S. B., Capraro, R. M., Barroso, L. R., Capraro, M. M., & Lee, Y. (2017, October). Moving from STEM to STEAM: The effects of informal STEM learning on students' creativity and problem solving skills with 3D printing. In 2017 IEEE Frontiers in Education Conference (FIE) (pp. 1–6). IEEE. https://doi.org/10.1109/fie.2017.8190545
Blikstein, P. (2013). Digital fabrication and ‘making’ in education: The democratization of invention. FabLabs: Of machines, makers and inventors, 4(1), 1–21. https://doi.org/10.14361/transcript.9783839423820.203
Brown, A. (2015). 3D printing in instructional settings: Identifying a curricular hierarchy of activities. TechTrends, 59(5), 16–24. https://doi.org/10.1007/s11528-015-0887-1
Buehler, E., Comrie, N., Hofmann, M., McDonald, S., & Hurst, A. (2016). Investigating the implications of 3D printing in special education. ACM Transactions on Accessible Computing (TACCESS), 8(3), 1–28. https://doi.org/10.1145/2870640
Buehler, E., Kane, S. K., & Hurst, A. (2014). ABC and 3D: opportunities and obstacles to 3D printing in special education environments. In Proceedings of the 16th international ACM SIGACCESS conference on Computers & accessibility (pp. 107–114). https://doi.org/10.1145/2661334.2661365
Cheng, L., Antonenko, P. P., Ritzhaupt, A. D., & MacFadden, B. (2021). Exploring the role of 3D printing and STEM integration levels in students’ STEM career interest. British Journal of Educational Technology, 52(3), 1262–1278. https://doi.org/10.1111/bjet.13077
Chien, Y. H. (2017). Developing a pre-engineering curriculum for 3D printing skills for high school technology education. Eurasia Journal of Mathematics, Science and Technology Education, 13(7), 2941–2958. https://doi.org/10.12973/eurasia.2017.00729a
Choi, H. J., & Kim, J. M. (2018). Implications for activating 3D printer use for education in elementary and secondary schools. International Journal on Advanced Science, Engineering and Information Technology, 8(4–2), 1546–1551. https://doi.org/10.18517/ijaseit.8.4-2.5722
*Choi, S. Y. (2019). Development and Application of PBL-based Education Program for 3D Printing in Connection with the Invention Education. Unpublished master's thesis. Seoul: Seoul National University of Education. http://www.riss.kr/link?id=T15342742
Chun, H. (2022). A study on the design education method using 3D pen in an era of manufacturing change. Nanotechnology for Environmental Engineering, 7(1), 1–5. https://doi.org/10.1007/s41204-021-00174-5
Cohen, J. (2013). Statistical power analysis for the behavioral sciences. Routledge.
Cooper, H. (2015). Research synthesis and meta-analysis: A step-by-step approach (Vol. 2). Sage publications.
Dickson, B., Weber, J., Kotsopoulos, D., Boyd, T., Jiwani, S., & Roach, B. (2021). The role of productive failure in 3D printing in a middle school setting. International Journal of Technology and Design Education, 31(3), 489–502. https://doi.org/10.1007/s10798-020-09568-z
Eom, J. T., & Kwon, Y. J. (2016). Development of the biomimicry-focused convergence teaching program using 3D modeling & printing in life science. Biology Education, 44(4), 658–673. https://doi.org/10.15717/bioedu.2016.44.4.658
*Eun, Y. S., & Choi Y. H. (2019). Effects of technological problem-solving activity using the 3D printing on creative confidence in middle school technology subject. The Korean Journal of Technology Education, 19(3), 116–136. https://doi.org/10.34138/KJTE.2019.19.3.116
Ford, S., & Minshall, T. (2019). Where and how 3D printing is used in teaching and education. Additive Manufacturing, 25, 131–150. https://doi.org/10.1016/j.addma.2018.10.028
Ham, H. I. (2020). Research trends of STEAM education program. The Journal of Learner-Centered Curriculum and Instruction, 20(5), 567–586. https://doi.org/10.22251/jlcci.2020.20.5.567
*Ham, H. I., Kim, K. Y., & Kim, K. S. (2016). Analysis of the Effects of 3C-Maker Invention Education Program on Middle School STEAM Literacy. Journal of Korean Practical Arts Education, 22(4), 103–119. https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART002166590
Han, H. B., & Kwak, D. Y. (2018). Analysis of Correlation between the Use of 3D Printing in Design Process and the Factors of the STEAM Education Accepted by the Learners. Journal of the Korean Society of Design Culture, 24(4), 517–528. https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART002420895
*Han, J. S., & Hong, S. H. (2019). The development and application effects of STEAM program for tree model fractal structure using 3D printer. Korean Journal of Elementary Education, 30(1), 235–247. https://doi.org/10.20972/kjee.30.1.201903.235
Hedge, L. V., & Olkin, I. (1985). Statistical methods for meta-analysis. Academic Press.
Higgins, J. P. T., & Green, S. (2008). Cochrane handbook for systematic reviews of interventions. John Wiley & Sons Ltd.
*Hong, J. S., & Hong, S. H. (2019). Effects of fractal STEAM lesson for plant structure on scientific process skills, creative problem-solving ability and scientific interest using 3D printer. Biology Education, 47(1), 50–58. https://doi.org/10.15717/bioedu.2019.47.1.50
Imeri, A., Russell, N., Rust, J., Sahin, S., & Fidan, I. (2017). MAKER: 3D Pen Utilization in 3D Printing Practices. In 2017 ASEE Annual Conference Proceedings. https://doi.org/10.18260/1-2--27723
Jang, D. H., & Shin, I. S. (2011). Historical development of meta-analysis as an educational research methodology. The Journal of Curriculum and Evaluation, 14(3), 309–332. https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART001602372
Jang, E. S. (2017). Research on the Awareness and Conditions of Middle School Students of Free-semester program Korean Language instruction. Field Studies in Korean Language Education, 11(2), 129–160. https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART002288100
*Jeon, J. H., & Kim, D. H. (2017). Development of STEAM program using the infographic and 3D modeling for creative problem solving ability. Journal of The Korean Association of Information Education, 21(1), 67–76. https://doi.org/10.14352/jkaie.2017.21.1.67
Jeon, J. H., & Shin, Y. J. (2018). Qualitative Analysis of the Creative Design Process of Elementary School Students in STEAM Class. Journal of Korean Elementary Science Education, 37(2), 93–109. https://doi.org/10.15267/keses.2018.37.2.093
Jonassen, D. H. (1997). Instructional design models for well-structured and III-structured problem-solving learning outcomes. Educational Technology Research and Development, 45(1), 65–94. https://doi.org/10.1007/bf02299613
Kanadli, S. (2019). A meta-summary of qualitative findings about STEM education. International Journal of Instruction, 12(1), 959–976. https://doi.org/10.29333/iji.2019.12162a
Kang, M. J. (2020). Hazardous printing materials were used in 22.67% of schools using 3D printers. Press release from the National Assembly. Retrieved from https://blog.naver.com/kmgedu21/222085506594
*Kim, D. H., Yang, J. H., & Hong, S. H. (2016). The effects of 3D printer - based climate STEAM program on scientifically gifted elementary students. Journal of Energy and Climate Change Education, 6(2), 127–138. https://doi.org/10.22368/ksecce.2016.6.2.127
*Kim, G. H., & Lee, C. H. (2019). Influences of an invention education program using 3D printers on improvements of inventive capacity. The Journal of Education, 39(1), 89–108. https://doi.org/10.25020/je.2019.39.1.89
*Kim, H. I. (2021). Development of the life science maker education program for biodiversity learning and its application. Unpublished master's thesis. Cheongju: Korea National University of Education. http://www.riss.kr/link?id=T15914004
*Kim, H. J. (2016). The effects of science, job competence through STEAM education based on a Fine Arts among Secondary School Students: Focused on the food design class using 3D printer. Journal of Communication Design, 55, 19–30. https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART002102721
*Kim, M. K., Park, J. Y., Sung, Y. G., Han, J. J., Lee, B. H., & Yu, J. Y. (2018). Design and implementation of project-based integrated lesson utilizing 3D printing. The Journal of Elementary Education, 31(4), 23–48. https://doi.org/10.29096/JEE.31.4.02
*Ko, D. G., & Hong, S. H. (2019). Development and application of TPACK based STEAM program using 3D printer: Focused on the digestive system in the 'structure and function of our body' unit. Biology Education, 47(2), 153–170. https://doi.org/10.15717/bioedu.2019.47.2.153
*Ko, D. G., & Hong, S. H. (2021). Development and application of TPACK based STEAM program: Focused on the excretory organs in the ‘structure and function of our body’ unit. Journal of Korean Elementary Science Education, 40(4), 443–459. https://doi.org/10.15267/keses.2021.40.4.443
Kwon, H. K. (2017). Effects of 3D printing and design software on students’ interests, motivation, mathematical and technical skills. Journal of STEM Education, 18(4), 37–42. https://www.learntechlib.org/p/181996/
*Lee, B. R., Park, H. G., & Paik, S. H. (2020). The effect of convergence education program using 4D frame, GeoGebra, and 3D pen on convergence ability for creativity of 4th grade gifted students. Korean Journal of Teacher Education, 36(2), 73–88. https://doi.org/10.14333/KJTE.2020.36.2.73
Lee, D. K. (2019). A meta-analysis of the effects in maker education. Journal of Korean Association for Educational Information and Media, 25(3), 577–600. https://doi.org/10.15833/KAFEIAM.25.3.577
Lee, D. K., & Kwon, H. S. (2022). Keyword analysis of the mass media’s news articles on maker education in South Korea. International Journal of Technology and Design Education, 32, 333–353. https://doi.org/10.1007/s10798-020-09615-9
*Lee, J. J., Choi, I. J., & Cho, S. T. (2018). Development and application of creative elementary agricultural education program using 3D printer. Journal of Agricultural Education and Human Resource Development, 50(1), 231–248. https://doi.org/10.23840/agehrd.2018.50.1.231
*Lee, J. S. (2016). STEAM program using 3D printing developed considering the characteristics of gifted elementary students. Unpublished master's thesis. Daegu: Daegu National University of Education. http://www.riss.kr/link?id=T14071007
*Lee, K. Y., & So, K. H. (2021). The effect of climate change education using 3D printing on the elementary student’s climate literacy and scientific-related attitude. Journal of Energy and Climate Change Education, 11(1), 49–63. https://doi.org/10.22368/ksecce.2021.11.1.49
*Lee, Y. C., & Kim, H. P. (2015). The effects of an invention education program using 3D design and 3D printers on elementary school students' creativity. Journal of Korean Practical Arts Education, 21(3), 39–54. https://doi.org/10.17055/jpaer.2015.21.3.39
Leung, G., Pickett, A. T., Bartellas, M., Milin, A., Bromwich, M., Shorr, R., & Caulley, L. (2022). Systematic review and meta-analysis of 3D-printing in otolaryngology education. International Journal of Pediatric Otorhinolaryngology, 111083. https://doi.org/10.1016/j.ijporl.2022.111083
*Lim, D. H., & Kim, T. Y. (2019). The effect of the integrative education using a 3D printer on the computational thinking ability of elementary school students. Journal of The Korean Association of Information Education, 23(5), 469–480. https://doi.org/10.14352/jkaie.2019.23.5.469
Lin, K. Y., Lu, S. C., Hsiao, H. H., Kao, C. P., & Williams, P. J. (2021). Developing student imagination and career interest through a STEM project using 3D printing with repetitive modeling. Interactive Learning Environments, 1–15. https://doi.org/10.1080/10494820.2021.1913607
Litster, K., & Roberts, J. (2011). The self-concepts and perceived competencies of gifted and non-gifted students: A meta-analysis. Journal of Research in Special Educational Needs, 11(2), 130–140. https://doi.org/10.1111/j.1471-3802.2010.01166.x
Loibl, K., & Leuders, T. (2018). Errors during exploration and consolidation—The effectiveness of productive failure as sequentially guided discovery learning. Journal Für Mathematik-Didaktik, 39(1), 69–96. https://doi.org/10.1007/s13138-018-0130-7
Makino, M., Suzuki, K., Takamatsu, K., Shiratori, A., Saito, A., Sakai, K., & Furukawa, H. (2018). 3D printing of police whistles for STEM education. Microsystem Technologies, 24(1), 745–748. https://doi.org/10.1007/s00542-017-3393-x
Marks, J., & Chase, C. C. (2019). Impact of a prototyping intervention on middle school students’ iterative practices and reactions to failure. Journal of Engineering Education, 108(4), 547–573. https://doi.org/10.1002/jee.20294
Ministry of Education. (2021). Use your 3D printer safely. Sejong: Ministry of Education. Retrieved from https://www.moe.go.kr/boardCnts/view.do?boardID=294&boardSeq=88169&lev=0&searchType=null&statusYN=W&page=1&s=moe&m=020402&opType=N
Oh, J. W. (2018). A study of 3D map printing for blind people. The Geographical Journal of Korea, 52(3), 455–466. https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART002388815
Oh, S. S. (2002). Meta-analysis: Theory and practice. Konkuk University.
O'Reilly, J., & Barry, B. (2021). The effect of the use of computer-aided design (CAD) and a 3D printer on the child’s competence in mathematics. Irish Educational Studies, 1–24. https://doi.org/10.1080/03323315.2021.1964561
Park, H. R., & Lee, J. H. (2017). A qualitative study on 5-year-old children’s experiences with exploration and utilization of 3D printers in their play context. Journal of Life-span Studies, 7(3), 19–37. https://doi.org/10.30528/jolss.2017.7.3.002
*Park, W. S. (2015). Effects of students’ spatial visualization capability and affective attitude through three-dimensional geometric learning, based on 3D printer. Unpublished doctoral dissertation. Yongin: Dankook University. http://www.riss.kr/link?id=T14023887
Pearson, H. A., & Dubé, A. K. (2021). 3D printing as an educational technology: Theoretical perspectives, learning outcomes, and recommendations for practice. Education and Information Technologies, 27, 3037–3064. https://doi.org/10.1007/s10639-021-10733-7
Pinger, C. W., Geiger, M. K., & Spence, D. M. (2019). Applications of 3D-printing for improving chemistry education. Journal of Chemical Education, 97(1), 112–117. https://doi.org/10.1021/acs.jchemed.9b00588
Randolph, S. A. (2018). 3D printing: What are the hazards? Workplace Health & Safety, 66(3), 164–164. https://doi.org/10.1177/2165079917750408
Razali, F. (2021). Exploring Crucial Factors of an Interest in STEM Career Model among Secondary School Students. International Journal of Instruction, 14(2), 385–404. https://doi.org/10.29333/iji.2021.14222a
Rosenthal, R. (1979). The file drawer problem and tolerance for null results. Psychological bulletin, 86(3), 638. https://psycnet.apa.org/doi/10.1037/0033-2909.86.3.638
Schelly, C., Anzalone, G., Wijnen, B., & Pearce, J. M. (2015). Open-source 3-D printing technologies for education: Bringing additive manufacturing to the classroom. Journal of Visual Languages & Computing, 28, 226–237. https://doi.org/10.2139/ssrn.3331158
*Shim, H. Y., & Lee, H. E. (2018). Development and effectiveness of design education program using 3D printer. Design Convergence Study, 17(5), 113–128. https://doi.org/10.31678/SDC.72.8
Sigloch, H., Bierkandt, F. S., Singh, A. V., Gadicherla, A. K., Laux, P., & Luch, A. (2020). 3D printing-evaluating particle emissions of a 3D printing pen. Journal of Visualized Experiments, 164, e61829. https://doi.org/10.3791/61829
Song, M. J. (2018). Learning to teach 3D printing in schools: How do teachers in Korea prepare to integrate 3D printing technology into classrooms? Educational Media International, 55(3), 183–198. https://doi.org/10.1080/09523987.2018.1512448
*Song, Y. B. (2021). The effects of 3D printing fossil production on students' scientific attitudes and creative problem solving. Unpublished master's thesis. Cheongju: Korea National University of Education. http://www.riss.kr/link?id=T15913986
Sun, Y., & Li, Q. (2017). The application of 3D printing in mathematics education. In 2017 12th international conference on computer science and education (iccse) (pp. 47–50). IEEE. https://doi.org/10.1109/iccse.2017.8085461
Sun, Y., & Li, Q. (2018). Visualization of mathematical education by 3D printer. In 2018 1st IEEE International Conference on Knowledge Innovation and Invention (ICKII) (pp. 266–269). IEEE. https://doi.org/10.1109/ickii.2018.8569157
*Sung, S. C. (2016). Effects of 3D printing and robotics-related education on science process skills, scientific attitude, and creativity in elementary school students. Unpublished master's thesis. Cheongju: Korea National University of Education. http://www.riss.kr/link?id=T14178525
Thornburg, D. D., Thornburg, N., Armstrong, S., & Stager, G. (2014). The invent to learn guide to 3D printing in the classroom: Recipes for success. Constructing Modern Knowledge Press.
Viswesvaran, C., & Ones, D. S. (1995). Theory testing: Combining psychometric meta-analysis and structural equations modeling. Personnel Psychology, 48(4), 865–885. https://doi.org/10.1111/j.1744-6570.1995.tb01784.x
Wojtyła, S., Klama, P., & Baran, T. (2017). Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon. Journal of Occupational and Environmental Hygiene, 14(6), D80–D85. https://doi.org/10.1080/15459624.2017.1285489
Wu, C. F., Wu, H. P., Tu, Y. H., & Yeh, I. T. (2020). 3D pen tactile pictures generated by individuals with visual impairments. Journal of Visual Impairment & Blindness, 114(5), 382–392. https://doi.org/10.1177/0145482x20954759
Yang, M. J., Bang, S. H., Shin, I. S., & Yu, J. H. (2018). The effect of the youth counseling program: A meta-analysis. The Korea Journal of Youth Counseling, 26(2), 291–316. https://doi.org/10.35151/kyci.2018.26.2.014
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflicts of interest
The authors have no conflicts of Interest to declare that are relevant to the content of this article.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Appendix
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Lee, D., Kwon, H. Meta analysis on effects of using 3D printing in South Korea K-12 classrooms. Educ Inf Technol 28, 11733–11758 (2023). https://doi.org/10.1007/s10639-023-11644-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10639-023-11644-5