Possibilities are considered for a model-based decision support system developed and put into pilot operation at the Magnitogorsk Metallurgical Combine (MMK) for appraisal of operation and prediction of process situations in blast furnaces. The main model blocks make it possible to calculate material and heat balances; model heat, slag and gas dynamic conditions of blast furnace operations; select burden composition; calculate the viscoplastic iron-ore materials zone; and predict process situations. The model system is implemented as a complex of program modules and integrated into the MMK information system. A module for calculating melting material and heat balances includes both fulfilment of overall generally accepted balances, and calculation for balances of iron, sulfur, manganese, and titanium. A Slag Regime program module makes it possible to determine the most important properties of melted slag for implementation of normal slag conditions of smelting, to find the ratio of iron-ore materials providing slag of required viscosity and viscosity gradient, and to produce cast iron with required sulphur content. A Gas Dynamics of Blast-Furnace Smelting program module accomplishes calculation and visual display of gas dynamic characteristics of a burden layer as well as assessment of the change in pressure drop and degree of burden balancing in separate zones of the furnace in the design period with the change of burden parameters. A program module built into a balanced model of the UrFU–MMK blast-furnace process makes it possible to find iron ore compositions providing preparation of slag of the required properties with respect to viscosity and viscosity gradient, and makes it possible to prepare cast iron of the quality required with respect to sulfur content. A Viscoplastic Iron-Ore Materials Zone of Blast Furnace program module performs model calculation of a set of parameters specifying radial nonuniformity of charge and gas flow distribution in blast furnaces. The module includes calculation of temperature characteristics of iron-ore materials used for smelting, which makes it possible to display the shape and position of the cohesive zone in the profile of the furnace in question. Some results are provided of practical application of the system developed, and recommendations are given for certain aspects of resolving production tasks using the model-based decision support system.
Similar content being viewed by others
References
Q. Feng and L. Wang, “Blast furnace hoist charging control system based on ActiveX technology,” WIT Trans. Inform. Communic. Technol., Wuhan, China, May 7–8, 2013, 46, No. 2, 1853–1858 (2014).
B. H. Dimitrov, H. B. Nenov, and A. S. Marinov, “Comparative analysis between methodologies and their software realizations applied to modeling and simulation of industrial thermal processes,” Proc. 36th Int. Convent. on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2013, Opatija, Croatia, May 20–24, 2013, Art. No. 6596383.
S. Ueda, S. Natsui, H. Nogami, et al., “Recent progress and future perspective on mathematical modeling of blast furnace,” ISIJ Int., 50, 914–923 (2010).
S. Ueda, S. Natsui, R. Kon, et al., “Development of DEM model for analyzing in-furnace phenomena of blast furnace,” CAMP-ISIJ, 25, 57–60 (2012).
S. Natsui, H. Nogami, S. Ueda, et al., “Numerical analysis on injection of hydrogen bearing materials into blast furnace,” ISIJ Int., 44, 801–808 (2004).
H. Nogami, Y. Kashiwaya, and D. Yamada, “Numerical analysis on blast furnace operation with hydrogen injection,” CAMPISIJ, 24, 584–588 (2011).
L. A. Castro, A. J. Silva , Y. Sasaki, and J. Yagi, “A six-phases 3-D model to study simultaneous injection of high rates of pulverized coal and charcoal into the blast furnace with oxygen enrichment,” ISIJ Int., 51, 748–758 (2011).
O. P. Onorin, N. A. Spirin (ed.), V. L. Terent’ev, et al., Computer Methods for Modeling the Blast-Furnace Process, UGTU–UPi, Ekaterinburg (2005).
N. A. Spirin (ed.), V. V. Lavrov, V. Yu. Rybolovlev, et al., Model Systems for Maintaining Decisions Adopted in ACS TS for Blast-Furnace Melting Metallurgy, UrFU, Ekaterinburg (2011).
N. A. Spirin (ed.), V. V. Lavrov, V. Yu. Rybolovlev, et al., Mathematical Modeling of Metallurgical Processes in ACS TS: Textbook, UrFU, Ekaterinburg (2014).
N. A. Spirin, V. V. Lavrov, V. Yu. Rybolovlev, et al., “Use of contemporary information technology for analyzing the blast furnace process,” Metallurgist, 60, Nos. 1–2, 1–7 (2016).
V. Y. Rybolovlev, A. V. Krasnobaev, N. A. Spirinand, and V. V. Lavrov, “Principles of the development and introduction of an automated process control system for blast-furnace smelting at the Magnitogorsk Metallurgical Combine,” Metallurgist, 59, Nos. 7–8 653–658 (2015).
N. A. Spirin, V. V. Lavrov, A. A. Burykin, et al., “Complex of model systems for supporting decisions made in managing blast-furnace smelting technology,” Metallurgist, 54, Nos. 9–10, 566–569 (2011).
V. V. Lavrov and N. A. Spirin, “Automated information system for analysis and prediction of production situations in blast furnace plant,” IOP Conf. Ser. Mater. Sci. Eng., 150, Iss. l (2016).
N. A. Spirin, L. Y. Gileva and V. V. Lavrov, “Information modeling system for blast furnace control,” ibid.
N. Spirin, L. Gileva, V. Lavrov, et al., “The pilot expert system to control blast furnace operation,” AISTech 2015. Iron and Steel Technol. Conf. and 7th Int. Conf. on Science and Technology of Ironmaking, ICSTI 2015, Cleveland, USA, May 4–7, 2015, Code 113707 (2015), Vol. 1, pp. 1225–1232.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 6, pp. 35–40, June, 2017.
Rights and permissions
About this article
Cite this article
Pavlov, A.V., Polinov, A.A., Spirin, N.А. et al. Use of Model Systems for Solving New Technological Problems in Blast-Furnace Production. Metallurgist 61, 448–454 (2017). https://doi.org/10.1007/s11015-017-0516-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-017-0516-7