Abstract
Residential and commercial buildings consume approximately 60% of the world’s electricity. It is almost impossible to provide a general definition of thermal comfort, because the feeling of thermal comfort is affected by varying preferences and specific traits of the population living in different climate zones. A few studies have been conducted on thermal satisfaction of net-zero energy buildings prior to this date; one of the objectives of the present study is to draw a comparison between the thermal parameters for evaluation of thermal comfort of a net-zero energy building occupant. The building in this study was first optimized for the target parameters of thermal comfort and energy consumption, and hence, a net-zero energy building was formed. Subsequent to obtaining the acceptable thermal comfort range, the computational analyses required to determine the temperature for thermal comfort are carried out using the computational fluid dynamics model. The findings of this study demonstrate that for reaching net-zero energy buildings, solar energy alone is not able to supply the energy consumption of buildings and other types of energy should also be used. Furthermore, it is observed that optimum thermal comfort is achieved in moderate seasons.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Alfano d, Romana F, Ianniello E, Palella BI (2013) PMV–PPD and acceptability in naturally ventilated schools. Build Environ 67(September):129–137. https://doi.org/10.1016/J.BUILDENV.2013.05.013
Aryal P, Leephakpreeda T (2015) CFD analysis on thermal comfort and energy consumption effected by partitions in air-conditioned building. Energy Procedia 79:183–188. https://doi.org/10.1016/J.EGYPRO.2015.11.459
Ascione F, Bianco N, Böttcher O, Kaltenbrunner R, Vanoli GP (2016) Net zero-energy buildings in Germany: design, model calibration and lessons learned from a case-study in Berlin. Energy Build 133:688–710. https://doi.org/10.1016/j.enbuild.2016.10.019
Beyhan B, Cellat K, Konuklu Y, Güngör C, Karahan O, Dündar C, Paksoy H (2017) Robust microencapsulated phase change materials in concrete mixes for sustainable buildings. Int J Energy Res 41:113–126. https://doi.org/10.1002/er.3603
Cao S, Klein K, Herkel S, Sirén K (2017) Approaches to enhance the energy performance of a zero-energy building integrated with a commercial-scale hydrogen fueled zero-energy vehicle under Finnish and German conditions. Energy Convers Manag 142:153–175. https://doi.org/10.1016/j.enconman.2017.03.037
Cellat K, Beyhan B, Güngör C, Konuklu Y, Karahan O, Dündar C, Paksoy H (2015) Thermal enhancement of concrete by adding bio-based fatty acids as phase change materials. Energy Build 106:156–163. https://doi.org/10.1016/J.ENBUILD.2015.05.035
Cellat K, Beyhan B, Konuklu Y, Dündar C, Karahan O, Güngör C, Paksoy H (2019a) 2 years of monitoring results from passive solar energy storage in test cabins with phase change materials. Solar Energy. https://doi.org/10.1016/J.SOLENER.2019.01.045
Cellat K, Tezcan F, Kardaş G, Paksoy H (2019b) Comprehensive investigation of butyl stearate as a multifunctional smart concrete additive for energy-efficient buildings. Int J Energy Res 1:1–13. https://doi.org/10.1002/er.4740
Deb K, Pratap A, Agarwal S, Meyarivan T (2002) A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans Evol Comput 6(2):182–197
Deng S, Dalibard A, Martin M, Dai YJ, Eicker U, Wang RZ (2011) Energy supply concepts for zero energy residential buildings in humid and dry climate. Energy Convers Manag 52(6):2455–2460. https://doi.org/10.1016/j.enconman.2010.12.054
DesignBuilder (2019) Simulation hourly weather data. http://www.designbuilder.co.uk/content/view/144/223/
“Directive 2010/31/EU of the European Parliament and of the Council.” (2010) Official Journal of the European Union
Fabbri K (2013) Thermal comfort evaluation in Kindergarten: PMV and PPD measurement through Datalogger and Questionnaire. Build Environ 68:202–214. https://doi.org/10.1016/j.buildenv.2013.07.002
Fanger PO (1972) Thermal comfort: analysis and applications in environmental engineering. R Soc Health J 92(3):164
Haniff MF, Selamat H, Khamis N, Alimin AJ (2019) Optimized scheduling for an air-conditioning system based on indoor thermal comfort using the multi-objective improved global particle swarm optimization. Energy Eff 12(5):1183–1201. https://doi.org/10.1007/s12053-018-9734-5
Hu C-c, Li H-l (2016) Deducing the classification rules for thermal comfort controls using optimal method. Build Environ 98:107–120. https://doi.org/10.1016/j.buildenv.2015.12.025
Hwang R-l, Shu S-y (2011) Building envelope regulations on thermal comfort in glass facade buildings and energy-saving potential for PMV-based comfort control. Build Environ 46(4):824–834. https://doi.org/10.1016/j.buildenv.2010.10.009
ISO EN 7730 (2005) Ergonomics of the thermal environment-analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. International Organization for Standardization
Jadhav NY (2016) Green and smart building—advanced technology options. Springer Science + Business Media, Singapore. https://doi.org/10.1007/978-981-10-1002-6
Kang DH, Mo PH, Choi DH, Song SY, Yeo MS, Kim KW (2010) Effect of MRT variation on the energy consumption in a PMV-controlled office. Build Environ 45(9):1914–1922. https://doi.org/10.1016/J.BUILDENV.2010.02.020
Kim JT, Lim JH, Cho SH, Yun GY (2015) Development of the adaptive PMV model for improving prediction performances. Energy Build 98:100–105. https://doi.org/10.1016/j.enbuild.2014.08.051
Kordjamshidi M (2011) House rating schemes—from energy to comfort base. Springer, Berlin. https://doi.org/10.1007/978-3-642-15790-5
Law T (2013) The future of thermal comfort in an energy-constrained world. Springer International Publishing Switzerland, Basel. https://doi.org/10.1007/978-3-319-00149-4
Lu S, Pang B, Qi Y, Fang K (2018) Field study of thermal comfort in non-air-conditioned buildings in a tropical island climate. Appl Ergon 66:89–97. https://doi.org/10.1016/j.apergo.2017.08.008
Nada SA, El-Batsh HM, Elattar HF, Ali NM (2016) CFD investigation of airflow pattern, temperature distribution and thermal comfort of UFAD system for theater buildings applications. J Build Eng 6:274–300. https://doi.org/10.1016/j.jobe.2016.04.008
Orosa JA, Oliveira AC (2011) A new thermal comfort approach comparing adaptive and PMV models. Renew Energy 36(3):951–956. https://doi.org/10.1016/j.renene.2010.09.013
Pourshaghaghy A, Omidvari M (2012) Examination of thermal comfort in a hospital using PMV e PPD model. Appl Ergon 43(6):1089–1095. https://doi.org/10.1016/j.apergo.2012.03.010
Sarhaddi F, Farahat S, Ajam H, Behzadmehr A, Adeli MM (2010) An improved thermal and electrical model for a solar photovoltaic thermal (PV/T) air collector. Appl Energy 87(7):2328–2339. https://doi.org/10.1016/J.APENERGY.2010.01.001
Volkov AA, Sedov AV, Chelyshkov PD (2014) Modelling the thermal comfort of internal building spaces in social buildings. Procedia Eng 91:362–367. https://doi.org/10.1016/J.PROENG.2014.12.075
Wei S, Li M, Lin W, Sun Y (2010) Parametric studies and evaluations of indoor thermal environment in wet season using a field survey and PMV–PPD method. Energy Build 42(6):799–806. https://doi.org/10.1016/j.enbuild.2009.11.017
Wu W, Skye HM (2018) Net-zero nation: HVAC and PV systems for residential net-zero energy buildings across the United States. Energy Convers Manag 177:605–628. https://doi.org/10.1016/j.enconman.2018.09.084
Xu Z, Guoqiang H, Spanos CJ, Schiavon S (2017) PMV-based event-triggered mechanism for building energy management under uncertainties. Energy Build 152:73–85. https://doi.org/10.1016/j.enbuild.2017.07.008
Zhang S, Cheng Y, Fang Z, Huan C, Lin Z (2017) Optimization of room air temperature in stratum-ventilated rooms for both thermal comfort and energy saving. Appl Energy 204:420–431. https://doi.org/10.1016/j.apenergy.2017.07.064
Acknowledgements
The authors also extend appreciation to Dr. H. Shetabi for his invaluable contribution to correct grammatical errors and helpful comments on the manuscript.
Funding
This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that there is no conflict of interest.
Additional information
Editorial responsibility: M. Abbaspour.
Rights and permissions
About this article
Cite this article
Mahdavi Adeli, M., Farahat, S. & Sarhaddi, F. Increasing thermal comfort of a net-zero energy building inhabitant by optimization of energy consumption. Int. J. Environ. Sci. Technol. 17, 2819–2834 (2020). https://doi.org/10.1007/s13762-019-02603-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13762-019-02603-0