Abstract
Accurate predictions of the amount of harvestable energy available from ambient vibrations are important for design of energy harvesters and for their integration in specific applications. This need has motivated the development of many mathematical models for piezoelectric energy harvesters (PEHs). Existing models, however, require material and geometric PEH data that are often incorrect and/or unavailable. As a more accurate and practical means to meet this need, we propose an energy conversion model of a cantilevered PEH that requires only geometric data and modal parameters that can be directly measured using a standard vibration test. The newly proposed model facilitates calculation of the maximum output power and thus enables visualization of the harvestable energy from the target vibrating structure. Prediction accuracy of the proposed model was confirmed in our study through finite element analysis and experimental results. Practical use of the proposed energy conversion model was demonstrated by applying it to a cooling fan unit of a boiler facility in a power plant.
Article PDF
Similar content being viewed by others
References
Roundy, S. and Wright, P. K., “A Piezoelectric Vibration Based Generator for Wireless Electronics,” Smart Materials and Structures, Vol. 13, No. 5, pp. 1131–1142, 2004.
Hudak, N. S. and Amatucci, G. G., “Small-Scale Energy Harvesting through Thermoelectric, Vibration, and Radiofrequency Power Conversion,” Applied Physics Letters, Vol. 103, No. 10, Paper No. 101301, 2008.
Priya, S. and Inman, D. J., “Energy Harvesting Technologies,” Springer, 2009.
Roundy, S., Wright, P. K., and Rabaey, J., “A Study of Low Level Vibrations as a Power Source for Wireless Sensor Nodes,” Computer Communications, Vol. 26, No. 11, pp. 1131–1144, 2003.
Sodano, H. A., Inman, D. J., and Park, G., “A Review of Power Harvesting from Vibration using Piezoelectric Materials,” Shock and Vibration Digest, Vol. 36, No. 3, pp. 197–205, 2004.
Anton, S. R. and Sodano, H. A., “A Review of Power Harvesting Using Piezoelectric Materials (2003–2006),” Smart Materials and Structures, Vol. 16, No. 3, pp. R1–R21, 2007.
Erturk, A. and Inman, D. J., “Piezoelectric Energy Harvesting,” John Wiley & Sons, 2011.
Kim, H. W., Batra, A., Priya, S., Uchino, K., Markley, D., et al., “Energy Harvesting using a Piezoelectric “Cymbal” Transducer in Dynamic Environment,” Japanese Journal of Applied Physics, Vol. 43, No. 9A, pp. 6178–6183, 2004.
Kim, S., Clark, W. W., and Wang, Q.-M., “Piezoelectric Energy Harvesting with a Clamped Circular Plate: Analysis,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 10, pp. 847–854, 2005.
Wang, S., Lam, K. H., Sun, C. L., Kwok, K. W., Chan, H. L. W., et al., “Energy Harvesting with Piezoelectric Drum Transducer,” Applied Physics Letters, Vol. 90, No. 11, Paper No. 113506, 2007.
Wang, Z. and Xu, Y., “Vibration Energy Harvesting Device based on Air-Spaced Piezoelectric Cantilevers,” Applied Physics Letters, Vol. 90, No. 26, Paper No. 263512, 2007.
Tang, L., Yang, Y., and Soh, C. K., “Toward Broadband Vibration- Based Energy Harvesting,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 18, pp. 1867–1897, 2010.
Lee, S. and Youn, B. D., “A Design and Experimental Verification Methodology for an Energy Harvester Skin Structure,” Smart Materials and Structures, Vol. 20, No. 5, Paper No. 057001, 2011.
Lee, S. and Youn, B. D., “A New Piezoelectric Energy Harvesting Design Concept: Multimodal Energy Harvesting Skin,” Proc. of the IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 58, No. 3, pp. 629–645, 2011.
Roundy, S., Wright, P. K., and Rabaey, J. M., “Energy Scavenging for Wireless Sensor Networks with Special Focus on Vibrations,” Kluwer Academic Publishers, 2004.
DuToit, N. E., Wardle, B. L., and Kim, S.-G., “Design Considerations for MEMS-Scale Piezoelectric Mechanical Vibration Energy Harvesters,” Integrated Ferroelectrics, Vol. 71, No. 1, pp. 121–160, 2005.
Sodano, H. A., Park, G., and Inman, D., “Estimation of Electric Charge Output for Piezoelectric Energy Harvesting,” Strain, Vol. 40, No. 2, pp. 49–58, 2004.
Erturk, A. and Inman, D. J., “A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters,” Journal of Vibration and Acoustics, Vol. 130, No. 4, Paper No. 041002, 2008.
Erturk, A. and Inman, D. J., “An Experimentally Validated Bimorph Cantilever Model for Piezoelectric Energy Harvesting from Base Excitations,” Smart Materials and Structures, Vol. 18, No. 2, Paper No. 025009, 2009.
Erturk, A. and Inman, D. J., “Issues in Mathematical Modeling of Piezoelectric Energy Harvesters,” Smart Materials and Structures, Vol. 17, No. 6, Paper No. 065016, 2008.
De Marqui, Jr. C., Erturk, A., and Inman, D. J., “An Electromechanical Finite Element Model for Piezoelectric Energy Harvester Plates,” Journal of Sound and Vibration, Vol. 327, No. 1, pp. 9–25, 2009.
Kim, J. E. and Kim, Y. Y., “Analysis of Piezoelectric Energy Harvesters of a Moderate Aspect Ratio with a Distributed Tip Mass,” Journal of Vibration and Acoustics, Vol. 133, No. 4, Paper No. 041010, 2011.
Yang, Y. and Tang, L., “Equivalent Circuit Modeling of Piezoelectric Energy Harvesters,” Journal of Intelligent Material Systems And Structures, Vol. 20, No. 18, pp. 2223–2235, 2009.
Kim, J. E., “Analysis of Vibration-Powered Piezoelectric Energy Harvesters by using Equivalent Circuit Models,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 20, No. 4, pp. 397–404, 2010.
Youn, B. D., Kim, J. E., Jo, C., Kim, Y. Y., Yoon, H., et al., “Harvestable Energy Scanner,” KOR Patent, No. 10-2012-0139005, 2012.
Erturk, A. and Inman, D. J., “On Mechanical Modeling of Cantilevered Piezoelectric Vibration Energy Harvesters,” Journal of Intelligent Material Systems and Structures,” Vol. 19, No. 11, pp. 1311–1325, 2008.
Ikeda, T., “Fundamentals of Piezoelectricity,” Oxford University Press, 1990.
Goldschmidtboeing, F. and Woias, P., “Characterization of Different Beam Shapes for Piezoelectric Energy Harvesting,” Journal of Micromechanics and Microengineering, Vol. 18, No. 10, Paper No. 104013, 2008.
Richards, C. D., Anderson, M. J., Bahr, D. F., and Richards, R. F., “Efficiency of Energy Conversion for Devices Containing a Piezoelectric Component,” Journal of Micromechanics and Microengineering, Vol. 14, No. 5, pp. 717–721, 2004.
Weaver, Jr. W., Timoshenko, S. P., and Young, D. H., “Vibration Problems in Engineering,” John Wiley & Sons, 5th Ed., 1990.
Ahn, S.-H., “An Evaluation of Green Manufacturing Technologies Based on Research Databases,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 1, pp. 5–9, 2014.
Yoon, H. and Youn, B. D., “Stochastic Quantification of the Electric Power Generated by a Piezoelectric Energy Harvester using a Time-Frequency Analysis under Non-Stationary Random Vibrations,” Smart Materials and Structures, Vol. 23, No. 4, Paper No. 045035, 2014.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, J.E., Kim, H., Yoon, H. et al. An Energy conversion model for cantilevered piezoelectric vibration energy harvesters using only measurable parameters. Int. J. of Precis. Eng. and Manuf.-Green Tech. 2, 51–57 (2015). https://doi.org/10.1007/s40684-015-0007-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40684-015-0007-x