Comptes Rendus
no. 4-5
Simulation of shot peening: From process parameters to residual stress fields in a structure
Donato Gallitelli1 ; Vincent Boyer2 ; Maxime Gelineau2 ; Yann Colaitis1 ; Emmanuelle Rouhaud1  ; Delphine Retraint1 ; Régis Kubler3 ; Marc Desvignes3 ; Laurent Barrallier3
1 Université de technologie de Troyes, ICD LASMIS, Troyes, France
2 IRT M2P, Metz, France
3 ENSAM ParisTech, MSMP, Aix-en-Provence, France
Comptes Rendus. Mécanique, Volume 344 (2016) no. 4-5, pp. 355-374.

Manufacturing industries perform mechanical surface treatments like shot peening at the end of the manufacturing chain to protect important working parts. This treatment modifies the near surface of the treated part with the introduction of compressive residual stresses due to the repeated impacts of the shot. Then, the treated part exhibits, not only a longer life, but also a better fretting behavior, an improved resistance to corrosion… The objective of the present paper is first to study the relation between the process parameters and the material state (residual stress and plastic variables…) for a complex geometry. Next, a numerical tool is proposed, able to predict this material state in a time frame that is consistent with industrial constraints. The originality of the proposed approach thus consists in the chaining of the different steps. The first step is to choose the process parameters for the shot peening process considering conventional or ultrasonic shot peening and model the shot dynamics for a complex geometry. Once the impact velocity field is known, the objective is to compute the local incompatible plastic deformation field due to the repeated impacts using analytical methods. Then, a finite element model is used to compute the residual and deformation fields in the considered mechanical part. The complete method has been performed on the model of a gear, a mechanical part that is most often shot peened and exhibits a complex geometry.

Reçu le :
Accepté le :
Publié le :
DOI : 10.1016/j.crme.2016.02.006
Mots clés : Shot peening, Model, Residual stress, Shot dynamics
Donato Gallitelli 1 ; Vincent Boyer 2 ; Maxime Gelineau 2 ; Yann Colaitis 1 ; Emmanuelle Rouhaud 1 ; Delphine Retraint 1 ; Régis Kubler 3 ; Marc Desvignes 3 ; Laurent Barrallier 3

1 Université de technologie de Troyes, ICD LASMIS, Troyes, France
2 IRT M2P, Metz, France
3 ENSAM ParisTech, MSMP, Aix-en-Provence, France 
@article{CRMECA_2016__344_4-5_355_0,
     author = {Donato Gallitelli and Vincent Boyer and Maxime Gelineau and Yann Colaitis and Emmanuelle Rouhaud and Delphine Retraint and R\'egis Kubler and Marc Desvignes and Laurent Barrallier},
     title = {Simulation of shot peening: {From} process parameters to residual stress fields in a structure},
     journal = {Comptes Rendus. M\'ecanique},
     pages = {355--374},
     publisher = {Elsevier},
     volume = {344},
     number = {4-5},
     year = {2016},
     doi = {10.1016/j.crme.2016.02.006},
     language = {en},
}
TY  - JOUR
AU  - Donato Gallitelli
AU  - Vincent Boyer
AU  - Maxime Gelineau
AU  - Yann Colaitis
AU  - Emmanuelle Rouhaud
AU  - Delphine Retraint
AU  - Régis Kubler
AU  - Marc Desvignes
AU  - Laurent Barrallier
TI  - Simulation of shot peening: From process parameters to residual stress fields in a structure
JO  - Comptes Rendus. Mécanique
PY  - 2016
SP  - 355
EP  - 374
VL  - 344
IS  - 4-5
PB  - Elsevier
DO  - 10.1016/j.crme.2016.02.006
LA  - en
ID  - CRMECA_2016__344_4-5_355_0
ER  - 
%0 Journal Article
%A Donato Gallitelli
%A Vincent Boyer
%A Maxime Gelineau
%A Yann Colaitis
%A Emmanuelle Rouhaud
%A Delphine Retraint
%A Régis Kubler
%A Marc Desvignes
%A Laurent Barrallier
%T Simulation of shot peening: From process parameters to residual stress fields in a structure
%J Comptes Rendus. Mécanique
%D 2016
%P 355-374
%V 344
%N 4-5
%I Elsevier
%R 10.1016/j.crme.2016.02.006
%G en
%F CRMECA_2016__344_4-5_355_0
Donato Gallitelli; Vincent Boyer; Maxime Gelineau; Yann Colaitis; Emmanuelle Rouhaud; Delphine Retraint; Régis Kubler; Marc Desvignes; Laurent Barrallier. Simulation of shot peening: From process parameters to residual stress fields in a structure. Comptes Rendus. Mécanique, Volume 344 (2016) no. 4-5, pp. 355-374. doi : 10.1016/j.crme.2016.02.006. https://comptes-rendus.academie-sciences.fr/mecanique/articles/10.1016/j.crme.2016.02.006/

[1] J.O. Almen Fatigue failures are tensile failures, Prod. Eng., Volume 22 (1951), pp. 101-124

[2] J. Mackerle FEM and BEM analysis and modeling of residual stresses: a bibliography, Finite Elem. Anal. Des., Volume 37 (2001), pp. 253-262

[3] E. Rouhaud; D. Deslaef; J. Lu; J.-L. Chaboche Modeling of residual stress, shot peening (Jian Lu, ed.), Handbook on Residual Stress, Society of Experimental Mechanics, 2005

[4] M. Zimmermann; M. Klemenz; V. Schulze Literature review on shot peening simulation, Int J. Comput. Mater. Sci. Surf. Eng., Volume 3 (2010) no. 4, pp. 289-310

[5] B. Bhuvaraghan; S. Srinivasan; B. Maffeo Optimization of the fatigue strength of materials due to shot peening: a survey, Int. J. Struct. Chang. Solids, Mech. Appl., Volume 2 (2010), pp. 33-63

[6] H. Wohlfart The influence of peening conditions on the resulting distribution of residual stress, Chicago, IL, USA (1984)

[7] L. Barrallier Genèse des contraintes résiduelles de nitruration: étude expérimentale et modélisation, ENSAM, 1992 (Ph.D. thesis)

[8] J. Locquet Caractérisations métallurgiques et mécaniques de couches nitrurées – relation microstructure–comportement, ENSAM, 1998 (Ph.D. thesis)

[9] S. Jegou; L. Barrallier; R. Kubler Residual stress generation in nitrided ternary Fe-3%Cr −0.345%C alloy: phase transformations induced residual stresses, Acta Mater., Volume 58 (2010), pp. 2666-2676

[10] A. Sugianto; M. Narazaki; M. Kogawara; A. Shirayori; S.-Y. Kim; S. Kubota Numerical simulation and experimental verification of carburizing-quenching process of SCr420H steel helical gear, J. Mater. Process. Technol., Volume 209 (2009), pp. 3587-3609

[11] A.M. Korsunsky On the modelling of residual stresses due to surface peening using eigenstrain distributions, J. Strain Anal., Volume 40 (2005), pp. 817-824

[12] P.J. Withers; H.K.D.H. Bhadeshia Residual stress, part I: measurement techniques, Mater. Sci. Technol., Volume 17 (2001), pp. 355-365

[13] I. Altenberger Mechanical surface treatment, shot peening (Jian Lu, ed.), Handbook on Residual Stress, Society of Experimental Mechanics, 2005

[14] J. Zarka; G. Inglebert; P. Kasmai-Navidi A New Approach in Inelastic Analysis of Structures, CADLM, 1990

[15] S. Bagherifard; R. Ghelichi; M. Guagliano Numerical and experimental analysis of surface roughness generated by shot peening, Appl. Surf. Sci., Volume 258 (2012), pp. 6831-6840

[16] K. Han; D. Peric'; A.J.L. Crook; D.R.J. Owen A combined finite/discrete element simulation of shot peening processes, parts I and II: studies on 2D interaction laws, Eng. Comput., Volume 17 (2000), pp. 593-620

[17] B. Bhuvaraghan; S. Srinivasan; B. Maffeo; R. McLain; Y. Potdar; O. Prakash Shot peening simulation using discrete and finite element methods, Adv. Eng. Softw., Volume 41 (2010), pp. 1266-1276

[18] C. Nougier-Lehon; M. Zarwel; C. Diviani; D. Hertz; H. Zahouani; T. Hoc Surface impact analysis in shot peening process, Wear, Volume 302 (2013), pp. 1058-1063

[19] T. Rousseau; T. Hoc; P. Gilles; C. Nouguier-Lehon Effect of bead quantity in ultrasonic shot peening: surface analysis and numerical simulations, J. Mater. Process. Technol., Volume 225 (2015), pp. 413-420

[20] K. Murugaratnam; S. Utili; A. Petrinic A combined DEM–FEM numerical method for shot peening parameter optimisation, Adv. Eng. Softw., Volume 79 (2015), pp. 3-26

[21] V.B. Nguyen; H.J. Poh; Y.-W. Zhang Predicting shot peening coverage using multiphase computational fluid dynamics simulations, Powder Technol., Volume 256 (2014), pp. 100-112

[22] M. Micoulaut; S. Mechkov; D. Retraint; P. Viot; M. François Granular gases in mechanical engineering: on the origin of heterogeneous ultrasonic shot peening, Granul. Matter, Volume 9 (2007), pp. 25-33

[23] J. Badreddine; E. Rouhaud; M. Micoulaut; S. Remy Simulation of shot dynamics for ultrasonic shot peening: the effects of process parameters, Int. J. Mech. Sci., Volume 82 (2014), pp. 179-190

[24] J. Badreddine; S. Remy; M. Micoulaut; E. Rouhaud; V. Desfontaine; P. Renaud CAD based model of ultrasonic shot peening for complex industrial parts, Adv. Eng. Softw., Volume 76 (2014), pp. 31-42

[25] J. Badreddine Modélisation du grenaillage ultrason pour des pieces à géométrie complexe, 2014 (Thèse de Université de technologie de Troyes)

[26] A. Gariépy; S. Larose; C. Perron; M. Lévesque Shot peening and peen forming finite element modeling – towards a quantitative method, Int. J. Solids Struct., Volume 48 (2011), pp. 2859-2877

[27] H.Y. Miao; S. Larose; C. Perron; M. Lévesque On the potential applications of a 3D random finite element model for the simulation of shot peening, Adv. Eng. Softw., Volume 40 (2009), pp. 1023-1038

[28] K. Taehyung; Hyungyil Lee; Sunghwan Jung; Jin Haeng Lee A 3D FE model for the evaluation of equi-biaxial peening residual stress due to multi-impacts, Surf. Coat. Technol., Volume 206 (2012), pp. 3981-3988

[29] S.M.H. Gangaraj; M. Guagliano; G.H. Farrahi An approach to relate shot peening finite element simulation to the actual coverage, Surf. Coat. Technol., Volume 243 (2014), pp. 39-45

[30] S. Bagherifard; R. Ghelichi; M. Guagliano On the shot peening surface coverage and its assessment by means of finite element simulation: a critical review and some original developments, Appl. Surf. Sci., Volume 259 (2012), pp. 186-194

[31] T. Chaise; J. Li; D. Nélias; R. Kubler; S. Taheri; D. Douchet; V. Robin; P. Gilles Modelling of multiple impacts for the prediction of distortions and residual stresses induced by ultrasonic shot peening (USP), J. Mater. Process. Technol., Volume 212 (2012), pp. 2080-2090

[32] R. Comolet; J. Bonnin Mécanique expérimentale des fluides, Dunod, Paris, 2003 (tome 2 et 3)

[33] C. Ould Analyse des contraintes résiduelles générées lors du grenaillage: approches analytique, numérique et expérimentale des impacts de billes, 2007 (Thèse de doctorat de l'Université de technologie de Troyes)

[34] S. Baragetti; A. Terranova Non-dimensional analysis of shot peening by means of DoE, Int. J. Mater. Prod. Technol., Volume 15 (2000), pp. 131-141

[35] S. Baragetti; M. Guagliano; L. Vergani Numerical procedure for shot peening optimization by means of non-dimensional factors, Int. J. Mater. Prod. Technol., Volume 15 (2000), pp. 131-141

[36] D. Deslaef Modélisation numérique du grenaillage de précontraintes: approche tridimensionnelle et dynamique, 2000 (Thèse de doctorat de l'Université de technologie de Troyes)

[37] H. Guechichi Prévision des contraintes résiduelles dues au grenaillage de précontrainte, ENSAM, 1986 (Ph.D. thesis)

[38] S. Slim Identification du comportement en plasticité et fatigue, influence du taux de recouvrement en grenaillage, ENSAM, 1995 (Ph.D. thesis)

[39] M.T. Khabou Modélisation du comportement et des contraintes résiduelles introduites dans un matériau soumis à un grenaillage, ENSAM, 1989 (Ph.D. thesis)

[40] E. Rouhaud; A. Milley; J. Lu Introduction of residual stress fields in finite element three-dimensional structures, Proceedings of the Fourth European Conference on Residual Stress, 1997

[41] F. Ahdad; M. Desvignes Contraintes résiduelles et déformations plastiques, leurs relations mutuelles pour les pièces de géométries simples, Matér. Tech., Volume 5–6 (1996), pp. 46-50

[42] P. Renaud Numerical simulations of the shot peening process of materials initially treated by carburizing or carbonitriding, Arts et Métiers ParisTech, 2011 (Ph.D. thesis)

[43] X. Li; A. Miodownik; N. Saunders Simultaneous calculation of mechanical properties and phase equilibria, J. Phase Equilib., Volume 22 (2001)

[44] N. Saunders; Z. Guo; A. Miodownik; J.-P. Schille Modelling the material properties and behaviour of multicomponent alloys, International Congress on FEM Technology with ANSYS CFX and ICEM CFD Conference, 2004

[45] T.-S. Jun; A.M. Venter; A.M. Korsunsky Inverse eigenstrain analysis of the effect of non-uniform sample shape on the residual stress due to shot peening, Exp. Mech., Volume 51 (2011), pp. 165-174

[46] S.M. Afazov; A.A. Becker; T.H. Hyde Mathematical modeling and implementation of residual stress mapping from microscale to macroscale finite element models, J. Manuf. Sci. Eng., Volume 134 (2012) no. 2

Cité par Sources :

Commentaires - Politique

Ces articles pourraient vous intéresser

Investigation of mechanically attrited structures induced by repeated impacts on an AISI1045 steel

Guillaume Kermouche; Guillaume Pacquaut; C. Langlade; ...

C. R. Méca (2011)

Investigation of indentation-, impact- and scratch-induced mechanically affected zones in a copper single crystal

Pierre Juran; Pierre-Jacques Liotier; Claire Maurice; ...

C. R. Méca (2015)