Elsevier

Materials Science and Engineering: A

Volume 654, 27 January 2016, Pages 317-328
Materials Science and Engineering: A

The effect of strain distribution on microstructural developments during forging in a newly developed nickel base superalloy

https://doi.org/10.1016/j.msea.2015.12.042Get rights and content
Under a Creative Commons license
open access

Abstract

In the current study, the effect of strain distribution in a simple forging geometry on the propensity for recrystallization, and its impact on mechanical properties has been investigated in a newly developed experimental nickel-based superalloy. The new alloy was produced via a Powder Metallurgy (PM) route and was subsequently Hot Isostatic Processed (HIP), isothermally forged, and heat treated to produce a coarse grain microstructure with average grain size of 23–32 μm. The alloy was examined by means of Electron Back-Scatter Diffraction (EBSD) to characterise the microstructural features such as grain orientation and morphology, grain boundary characteristics and the identification of potential Prior Particle Boundaries (PPBs) throughout each stage of the processing route. Results at the central region of the cross-section plane parallel to the loading direction showed significant microstructural differences across the forging depth. This microstructural variation was found to be highly dependent on the value of local strain imparted during forging such that areas of low effective strain showed partial recrystallisation and a necklace grain structure was observed following heat treatment. Meanwhile, a fully recrystallised microstructure with no PPBs was observed in the areas of high strain values, in the central region of the forging.

Keywords

Nickel-based superalloy
Forging
Recrystallization
Microstructure
EBSD

Cited by (0)